user_873678359

falconius

If you have ever had any sort of pet, you know at least two things;1.) they can be hard on their toys.and2.) Toys can be expensive.I got tired of forking out ~$10 every time my Alex or Meyers chewed through their swing or perch or whatever.I Have been designing a group of toys for birds.&nbsp;I have had issues with various coil-type toys for birds. specifically the one that have a multicolor threaded cover for a metal coil.a breeder friend had a birdie&#39;s foot/leg get caught in the chewed up threads and almost lost the bird.&nbsp;so i designed a stand-alone coil that the birds can chew on that has no soft threads that a bird could get his foot caught in.I try to keep all these toys in PETG, and this is no exception.&nbsp;its for a .4mm nozzle and you pretty much HAVE to enable supports. the one in the picture i did with regular supports and then used a deburring tool on it. &nbsp;

Birdie Coil, free Standing Toy

🐦

G-Man Projects

<h2>Apex Legends Wingman with Reload Mechanism</h2>A mechanical Apex Legends Wingman build project, with a spring loaded mechanism to mimic the reload animation in game.See the build tutorial video here: <a target="_blank" href="https://youtu.be/8yLk7pH2WKw" rel="nofollow noopener">https://youtu.be/8yLk7pH2WKw</a><h3>You will need</h3><ul><li>Black PLA</li><li>Silver PLA</li><li>Bronze PLA</li><li>Red PLA (a really small amount, so maybe don&#39;t buy a whole roll for it)</li></ul><h3>Additional parts required</h3><ul><li>1x Spring (65mm free length, 6.8mm diameter): <a target="_blank" href="https://uk.rs-online.com/web/p/compression-springs/0751477/" rel="nofollow noopener">https://uk.rs-online.com/web/p/compression-springs/0751477/</a> (this should be a fairly common spring internationally however I am unable to list sources for other countries)</li><li>15x No.6 x 3/8in self tapping flange screw (ebay/amazon/etc)</li><li>11x No.6 x 5/8in self tapping flange screw (14x if printing A1 Mini version!)</li></ul>Unfortunately the Bambu Store does not have the required parts (this model long predates the existence of Bambu Lab), I may modify this design in the future to be compatible, however by the looks of the springs available none of them would suffice anyway.&nbsp;If you enjoy this design and fancy supporting me, please buy me a Ko-fi: https://ko-fi.com/gmanprojects

Apex Legends Wingman with Reload Mechanics

模型

darbooka

Broken plant pot design. Made to look broken and cracked, and the broken pieces are used to make different tiers.&nbsp;This was inspired by similar designs I&#39;ve seen using actual broken clay plant pots, but wanted to make one 3d printable. Scales easily and can be made for whatever size you&#39;d like. No supports needed.&nbsp;I also uploaded an uncracked version and several ‘crack’ models that can be used to customize the cracked look to your liking, right in Bambu Studio&nbsp;How to add cracks to the model:<ul><li>Assemble the object<ul><li>Hold shift to select both objects.</li><li>Right click &gt; Assemble</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/816182/2024-04-04_60c10dbc3ec16.gif"></li></ul></li></ul>&nbsp;<ul><li>Select just the crack object in the objects view<ul><li><img src="https://makerworld.bblmw.com/makerworld/draft/816182/2024-04-04_0414c9d4aa4cd.png"></li></ul></li></ul>&nbsp;<ul><li>Move, scale, and rotate the crack to where you&#39;d like it on the planter<ul><li><img src="https://makerworld.bblmw.com/makerworld/draft/816182/2024-04-04_a7aa1aae7cfbf.png"></li></ul></li></ul>&nbsp;<ul><li>Remove the crack shape from the plant pot<ul><li>Click on the plant pot object</li><li>Select ‘Mesh Boolean’ from the top toolbar, or press ‘B’</li><li>Select ‘Difference’</li><li>Click on the plant pot object for ‘Subtract from’</li><li>Click on the crack object for ‘Subtract with’</li><li>Check the ‘Delete input’ box so the crack object is removed, leaving the difference in the pot</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/816182/2024-04-04_94ad5c35cf25.gif"></li></ul></li></ul>&nbsp;Printed at 0.2mm layer heightDuramic3D PLA+ stone filamentNo supports&nbsp;Enjoy :)

Broken Plant Pot

收纳

ruiraptor.channel

This is a bird stand for a desk.This way, your bird pet can stay next to you while you work.&nbsp;Use 6 M3x14 screws to secure all the parts. No supports are required.

Bird stand for desk

支架

Jonan Seeley

Parametric Device Stand&nbsp;Simple stand for small to large devices of any thickness. Includes optional hexagonal cutout pattern for aesthetics/filament savings.&nbsp;Note that due to limitations with editing vectors in the Customizer view in both OpenSCAD and MakerWorld, the number of devices is limited to 10.  The code is somewhat rough but should be easily editable to add more devices if you require.&nbsp;Key Features:<ul><li>Device Thickness: Input the thickness of your devices to ensure a snug fit</li><li>Stand Width: Adjust the width of the stand to fit your desired dimensions</li><li>Divider Height: Customize the height of the dividers to separate your devices</li><li>Fillet Radii: Tune the fillet radii to control the curvature of the stand&#39;s edges</li><li>Hex Pattern: Enable or disable the hex pattern and adjust its details to suit your preferences</li></ul>Instructions:<ol><li>Measure the thicknesses of your devices</li><li>Input the measurements into the parameter list</li><li>Adjust the stand&#39;s other parameters to meet your desired specifications</li><li>Download and print your customized stand!</li></ol>

Parametric Device Stand

实用工具

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

玩具

Supergrapher

Update:18th of Jun 2024<ol><li>Just tidying up of the files and a small update for the nozzles. </li><li>The Paint-On numbered covers are kept as a seperate file</li><li>The extra nozzles are now part of the main file.</li></ol>&nbsp;12th of Jun 2024<ol><li>Tweaked the port holes so it grips the PTFE tubes better. (In case you don&#39;t know, you can use PTFE tubes instead of the printed nozzles)</li><li>Very slightly narrow the for hole for the hygrometer so it fits tighter.</li><li>Changed the style of the brackets and the fonts to match that of the Covers</li></ol>11th of Jun 2024<ol><li>Tweaked the internal geometry of the nozzles to reduce rubbing as the filament travels through it. </li><li>If you feel are you getting too much resistance or rubbing from the original Nozzles, you can try wider Nozzles. You can find the Nozzle Pack under print profiles. These nozzles comes in a choice of Original, +0.05 and +0.10. </li></ol>8th of Jun 2024<ol><li>Sliced abit off the side of the cover to make the cover easier to fit when using the top mount. I missed the measurement, it will fit, but just barely. If you are using my Clip-On Top Mount, I&#39;ve updated the file so it works now. </li><li>I&#39;ve brought back the Paint-On numbers for the cover. You can color it yourself (the stencil will appear when you use the Bambu Studio Paint function) or you can just use the one I uploaded under print profiles. <img class="image_resized" style="width: 45.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-09_cc8d5d3eff2808.jpg"></li><li>Small adjustments to the clips to make it snap tighter. I&#39;ve also reduced the size of the release lever incase it catches on the spool.</li></ol>&nbsp;&nbsp;Finally I&#39;ve created the ULTIMATE FILAMENT SPOOL ENCLOSURE for the AMS LITE!&nbsp;Thank you for all the support and feedback on the previous design. I’ve incorporated everything I’ve learned to create a new design that I believe is better and more user-friendly. Now, installing and feeding filament is so much easier. The cover is attached using clips, making the process more straightforward. No additional tools or parts are needed, and you have a choice of action panels and action buckets to suit your needs.&nbsp;My favorite action panel is the dual monitoring (inside/outside) hygrometer panel.&nbsp;This is also compatible with my and Bambulab&#39;s AMS lite top mount. You&#39;ll need to remove the screw on the Bambulab version.&nbsp;Installation is also relatively easy. Let’s get started!&nbsp;NOTE PLA for all partsPETG for the clips&nbsp;InstructionsConnect the buckets together as shown using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_c0d1267bb22298.jpg"></figure>Install the plugs by press-fitting them. They don&#39;t need to go in all the way; stop once they are tight. The round-based ones are for the filament to go through, while the square ones are for sealing. &nbsp;I&#39;ve also designed it so that you can use a PTFE tube if preferred. Just gently push it through the hole. I would recommend a very short tube of 2 to 4cm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_d54667eaaf1b5.jpg"></figure>Install the setup onto the AMS Lite. Connect the covers and your choice of action panel together using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_cbde24d2cc6688.jpg"></figure>Work your way around the perimeter of the hygrometer and it should pop into place in the recess. It sits flush when installed correctly. Note that the hygrometer is held in place by it&#39;s brim and not the clips.&nbsp;<a target="_blank" href="https://www.amazon.com/dp/B07GR67G1M" rel="nofollow noopener">https://www.amazon.com/dp/B07GR67G1M</a><a target="_blank" href="https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb" rel="nofollow noopener">https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-17_60b39b7d93afc.jpg"></figure>Install your choice of Action Buckets.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_2a590d0bc9a088.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_69b8c7c9fe3ff8.jpg"></figure>Attach the cover using the clips. You may also also install the brackets for additional stability.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_22d56660fab948.jpg"></figure>&nbsp;&nbsp;That&#39;s it, I guess the rest should be quite self explanatory.&nbsp;Have Fun!

🐦

模型

收纳

支架

实用工具

玩具

配件