雀食

Spamboni

These are rollers intended for rolling 3D printing filament spools on. I&#39;m sure there are other uses for them. They are intended for mounting with some tape or glue, whatever you want to use. A couple of the brackets could possibly be drilled and screwed.  There are 9 bracket types. Only one is for the RollerWheel_Long.  2 are for the RollerWheel_Bigger. There are 4 rollers, 1 longer, one with bigger rims, and 2 shorter. Of the 2 shorter ones, one has a slightly smaller groove about .160 inches wide, about 5/32 of an inch. Each of the rollers uses the same roller pin inserted into one end. Insert the end that attaches to the print plate, not that it really matters that much but the other end has a small fillet on it. Then that assembly snaps into the bracket of your choice.  I included all the seperate .stp files and a .3MF file for my Bambu Studio settings. I printed on a Bambu Lab X1C, with a Wham Bam PEX Plate. There is also a .zip file with all the listed files.There is an image on this page of all the .stp files loaded into Bambu Studio, which shows all the bracket shapes. I loaded pictures of a few of the different models seperately.  I printed everything with a .4 mm nozzle, at .08 mm layer height. I printed everything at mostly 200 mm/s, could probably print a bit faster. I stuck with 2 walls on everything, which should be enough. I also added brims to the rollers and the roller pin. You might need to make changes in the .3MF file depending on what kind of build plate you use.  I have not mounted any of these, but just by testing I noticed that they don&#39;t really even need to roll. The spool slides nicely even if they don&#39;t roll.  I&#39;m attempting a 150% print now. You should be able to just scale everything evenly to whatever size and it should still all fit well.

3D Printing Spool Rollers - Multiple Sizes

零件

BamBam Design

<h4>The Sunflower Windmill - Self adjusting Sunflower wind turbine</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/Nb2DXeNK04M?si=IG2UF_6DRZEUfwdW"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Nb2DXeNK04M"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Nb2DXeNK04M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Need a bit more wind, but can turn fast as well. Great spring &amp; summer garden decoration<ul><li>Beautiful Windmill with a Sunflower Propeller Design</li><li>Self adjusting to wind direction through the Tail Blade</li><li>100% printed, no Screws or tools needed</li><li>You can add 2 Propellers on one Axle with 2 distances</li><li>Choose your propeller sizes and directions (You get nice effects if you choose different directions)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;Profile is tested with PETG &amp; PLA 👍🏼 Prefer PETG for Axle and Rod&nbsp;Info:This time the Axle is a bit shorter to add only 2 propeller with 10mm and 2 distances with 5mm each.And i slightly redesigned the tail blade to match the sunflower design. My other windmills are still fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul><h4>Assembly:</h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-04-12_5daa8d4f64298.png"> Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Some other Windmill Designs:<a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon</a><figure class="image"><a href="https://makerworld.com/en/models/454861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9785fb508d759.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb</a><figure class="image"><a href="https://makerworld.com/en/models/250216" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9a2a48a0331ed.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/235261" rel="nofollow noopener">Toroidal</a><figure class="image"><a href="https://makerworld.com/en/models/235261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_ca5dfbc30c041.jpg"></a></figure>&nbsp;Checkout this Clamp for windmill, as well🧐 <a target="_blank" href="https://makerworld.com/models/255324" rel="nofollow noopener">https://makerworld.com/models/255324</a><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-03-15_6d9c46a2c3e8c.jpg"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Sunflower Windmill - Customizable System

玩具

Timo

neue schnellere Version gibt es hier:<a target="_blank" href="https://makerworld.com/en/models/472740#profileId-382628" rel="nofollow noopener">https://makerworld.com/en/models/472740#profileId-382628</a> &nbsp;Dose für Silica-Gel-Kugeln.  45 mm Durchmesser, Höhe 18 mm. Mit 2,6 mm Löchern. Wandstärke 1 mm, 7,3 g Filament. Der Deckel wird mit einem Gewinde geschlossen.V2: Unterteil wurde überarbeitet - Besserer Übergang zum Gewinde (Siehe Schnittbild).***********************************new faster version is available here:<a target="_blank" href="https://makerworld.com/en/models/472740#profileId-382628" rel="nofollow noopener">https://makerworld.com/en/models/472740#profileId-382628</a> &nbsp;Tin for silica gel balls.  45 mm diameter, height 18 mm. With 2.6 mm holes. Wall thickness 1 mm, 7.3 g filament. The lid is closed with a thread.V2: Lower part has been revised - better transition to the thread (see sectional view).

Round silica gel box with thread V2

工具

lloydliu

为拓竹AMS设计的干燥剂盒，带有一个方便拿取的提手，以及一个经过特别设计的盒盖，盒盖带有两片刀刃型侧板，在向外翻转打开时，可以形成一个小漏斗，辅助装填分子筛或球形变色硅胶干燥剂颗粒。干燥盒分为标准型和薄型两款，分别用于放置在料盘中间的槽位空隙和紧贴边缘的窄间隙位置。&nbsp;11-22更新：1、为统一适配温度计版和标准版干燥盒，重新调整了翻盖的造型（原版本保留，可选择性打印，但互不兼容）；2、根据新的翻盖重新调整了标准型干燥盒翻盖结构（原版本保留，可选择性打印,但互不兼容）；3、缩小了薄型干燥盒的手柄，以避开料盘；4、经测试发现镂空翻盖在打印时容易出现首层不良，因此去掉了盖子的镂空；5、重新上传了所有3mf和stl文件。&nbsp;&nbsp;The drybox designed for Bambulab AMS has an easy-to-reach handle and a specially designed cap with two knife-edged side plates, that can be flipped outwards to create a small funnel to assist in filling molecular sieves or spherical color-changing silica gel desiccant granules. The drybox is available in two versions, standard and slim, and is used to place the slot gap in the middle of the tray and the narrow gap close to the edge, respectively.Update in 11-22:1. In order to uniformly adapt the thermometer version and the standard version of the drybox, the shape of the cap has been readjusted (The original version is retained and can be optionally printed, but two version are incompatible) ;2. The structure of the standard drying box was readjusted according to the new cap (The original version is retained and can be optionally printed, but two version are incompatible) ;3. The handle of the slim drybox has been reduced to avoid interfering the spool;4. After testing, it was found that the hollow cap was prone to defective first layer when printing, so the hollowing out of the cap was removed;5. Re-uploaded all the 3mf and STL files.

AMS干燥盒 Drybox for AMS

P1SC

*** BREAKING NEWS ***ATTENTION: 65 mm long toothpicks &amp; 0.2 mm layer height is required for this version!ACHTUNG: Für diese Version werden 65 mm lange Zahnstocher &amp; 0,2 mm Schichthöhe benötigt!*** *** *** *** *** ***&nbsp;************ UPDATE ************I&#39;m still collecting suggestions for Version 3. Let me know in the comments if there&#39;s anything missing:1.   65 to 68 mm toothpicks must fit 2.   Container for approx. 100 toothpicks 3.   Design without text and symbols4.   Shouldn&#39;t look like a Chinese coffin, but more like a Porsche********************************&nbsp;I love mechanical &#34;Print-In-Place&#34; models. And sometimes I enjoy clicking or screwing things together after printing.But why shouldn&#39;t my 3D printer handle that if it can do it much better than I can...Inspired by various models and 3D printing techniques, I proudly present my latest creation. After numerous prototypes, your printer should be able to produce this toothpick dispenser without any post-processing or assembly.&nbsp;I hope this little gadget brings you as much joy as it did for me while developing it.&nbsp;PS: The version number is written inside. I look forward to your feedback and suggestions for improvement.Updates will follow...&nbsp;***********************&nbsp;Mechanischer Zahnstocher Spender – Einteiler, keine Stützen, keine Montage, keine Nachbearbeitung.&nbsp;Ich liebe mechanische «Print-In-Place» Modelle. Und manchmal mag ich es, wenn ich nach dem Druck etwas zusammen klicken oder schrauben kann.Aber warum sollte das nicht mein 3D Drucker machen, wenn er das doch viel besser als ich kann…Inspiriert von verschiedenen Modellen und 3D-Druck Techniken präsentiere ich nun meine neueste Kreation. Nach zahlreichen Prototypen sollte nun auch dein Drucker diesen Zahnstocher Spender ohne Nachbearbeitung und zusammen friemeln ausspucken.&nbsp;Ich hoffe dieses kleine Gadget bereitet euch genau so viel Freude wie mir beim Entwickeln.&nbsp;PS: Im Inneren ist die Versionsnummer angeschrieben. Ich freue mich auf euren Feedback und Verbesserungsvorschläge.Updates werden folgen…

零件

玩具

工具

P1SC

日常用品