user_831518591

Valeria Momo

Don't get your bike stolen! Or if they actually steal it, at least you know where it is.Mount this super Airtag holder on your bike.You can mount it behind the bike bottle cage (the distance of the 2 holes is standard is standard in almost all bike models).

Bike Airtag Holder

bike related 

cseelye

I really liked the gridfinity edit of the modular drawers, but sometimes I wanted a larger drawer. Then other people wanted smaller drawers, or different sizes, so I made a few different combinations. They are all the same Z height as the original 2x5 drawers but obviously wider and/or not as deep, so if you are mixing sizes then they can only be combined in certain ways.Sizes available:<ul><li>3x5</li><li>3x4</li><li>3x3</li><li>2x5</li><li>2x4</li><li>2x3</li></ul>Other changes:The drawer pull is slightly redesigned so it prints without bridging or supports.I added a 3-way connector to compliment the 2-way and 4-way, for when you have an uneven number of drawers in a row/column. I adjusted the fit slightly since they were way too tight for me. They may work better in PETG instead of PLA. Let me know if you have issues with the fit and I can adjust the clearance.The magnet holes are slightly smaller than gridfinity spec to make them press-fit. I also added a small test grid you can print to see how it fits your magnets.And, in case you wanted to put your drawer onto a Gridfinity baseplate, I created some grid connectors so you can Gridfinity your Gridfinity drawer, dawg.<figure class="image image_resized image-style-align-center" style="width:30.02%;"><img src="https://makerworld.bblmw.com/makerworld/draft/62454/2023-10-03_zj84r5bqpwi8.jpg"></figure>Printing:The drawers print flat on their bottom. The shell prints standing upright on the back and the connectors print standing upright in the same way. The files should have the correct orientation saved so you can import them directly to your slicer and go. You'll probably want a brim for the connectors and maybe for the shells.I included several lengths of connectors for each drawer size to make it easier to fit on various printers. If you can make the full length connectors fit and print, go for it, but they are mostly useful for you to trim to custom lengths.I've printed several sets of drawers/shells/connectors in PLA, but PETG or really any material should work fine.I uploaded both STEP and STL, but the STL are mostly meant for previewing here and you should print from the STEP files if your slicer supports it.&nbsp;These are all generated with a parametric model in OnShape, if you want to play with it yourself: <a href="https://cad.onshape.com/documents/a9277a915bd9b02662b477f6/w/8ff2348a0bac646b64f9cf6f/e/1b5dbec11611c5344d23b1f2?configuration=Grid_Depth%3D5.0%3BGrid_Width%3D3.0%3BGrid_bottom%3Dtrue&renderMode=0&uiState=647a37b5034fd51ae24deeca" rel="nofollow">https://cad.onshape.com/documents/a9277a915bd9b02662b477f6/w/8ff2348a0bac646b64f9cf6f/e/1b5dbec11611c5344d23b1f2?configuration=Grid_Depth%3D5.0%3BGrid_Width%3D3.0%3BGrid_bottom%3Dtrue&renderMode=0&uiState=647a37b5034fd51ae24deeca</a>

Modular Gridfinity Drawers in various sizes

useful?

xallex digital design

Replaceable HEPA/Carbon Charcoal Filters for Bambu X1C/P1S Chamber Exhaust Stackable Chamber Exhaust port filter housing for either HEPA or Carbon Charcoal filters. &gt; Housing mounted to printer using existing threaded holes on the printer, using x4 M3x6mm button cap screws. &gt; Mesh Layer and Top mounted to Housing using x4 M3x6mm button cap screws. &gt; Filter Cartridge slides in from the side. &gt; Optional Housing with modification for use on printers that have the AMS Hub installed are included&gt; Optional TPU gaskets are included &gt; Optional Additional Filter Housing can be added to use multiple filters, this is fitted between the Housing and the Mesh Layer using x4 M3x25mm button cap screws. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. Use recommendations: - Use top glass riser to increase airflow - Set the chamber fan to 70% or higher. HEPA Filters: (<a target="_blank" href="https://amzn.to/49Uu6vF" rel="nofollow noopener">https://amzn.to/49Uu6vF</a>) Cut-to-Fit Carbon Pad for Air Filters Charcoal Sheet (<a target="_blank" href="https://amzn.to/4bd4iw1" rel="nofollow noopener">https://amzn.to/4bd4iw1</a><a target="_blank" href="https://amzn.to/49OXIe5" rel="nofollow noopener">)</a> Screws: x4 Qty M3x6mm Button Cap screws to mount Housing to printer (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) x4 Qty M3x6mm Button Cap screws to secure Top and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) If optional second filter housing is used: x4 Qty M3x25mm Button Cap screws to secure optional second filter housing, Top, and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) Material: Silver - IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4dhLtK4" rel="nofollow noopener">https://amzn.to/4dhLtK4</a>) Light Blue -IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4deSoUc" rel="nofollow noopener">https://amzn.to/4deSoUc</a>) Red - Hatchbox (<a target="_blank" href="https://amzn.to/3Ukwbvc" rel="nofollow noopener">https://amzn.to/3Ukwbvc</a>) - Design Update - 4.12.24 - - Included an optional filter tray addition to use both filters simultaneously. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. - Increased the diameter of the holes in the Top, and Mesh parts to allow the M3 screws through. - Added optional TPU gasket files. Thanks <a target="_blank" href="https://makerworld.com/en/@wiczdesigns" rel="nofollow noopener">@wiczdesigns</a> for the suggestions. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-12_b002cd1bffc35.jpg">   - Design Update - 4.11.24 - I have added main housing to accommodate printers that have the AMS Hub installed. Thanks to user @redborder for the suggestion and reference photos. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-11_f7d508262327d.png"> - Design Update - 4.9.24 - I have added a filter box and lid for use with Carbon/Charcoal Filter Material, to extend the carbon filtering from the chamber exhaust.

HEPA/Carbon Filters Bambu X1C/P1S Chamber Exhaust

printer mods

glowamg

Seat belt bolt cap small for wrench 17mm. It fits for many cars. Especially to Fiat 500, 126, 600 and Porsche 911.PETG works great.

Seat belt bolt cap small 17mm for Fiat Porsche 911

JayRay

This is the original #3DBenchy directly from Creative Tools. Not a download of a download, nor all the slightly modified versions found elsewhere (ie, BambuLab Studio, Printables, etc…)&nbsp;I would like to introduce the #3DBenchy to Maker World. During the close beta period, there was no #3DBenchy available to send to the printer from the phone app so I uploaded it here. &nbsp;Please add your profiles as you see fit for the community to use to run tests. Thanks!&nbsp;Community members have provided a ton of different profiles. I hope you find one that fits your testing needs. Remember, a bad Benchy print could mean your filament calibrations are off, or a sign of mechanical error (for Bambu Printers.)&nbsp;All models uploaded and the below content is extracted from 3Dbenchy.com.<figure class="media"><div data-oembed-url="https://youtu.be/_epwuDI9FBI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_epwuDI9FBI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image"><a href="http://www.3dbenchy.com/features/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy__Low-slope_surfaces_1-300x300.png"></a></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Visit <a target="_blank" href="http://www.3dbenchy.com/sample-page/features/" rel="nofollow noopener">this link</a> to see a complete list of each feature and correspondent descriptions.<figure class="image"><a href="http://www.3dbenchy.com/dimensions/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_about_features-300x287.png"></a></figure>Use #3DBenchy to test and calibrate your 3D printer by adjusting hardware and software settings for optimal results.The shape and size of this 3D model is designed to challenge 3D printers. Compare your #3DBenchy results with the dimensions illustrated in <a target="_blank" href="http://www.3dbenchy.com/dimensions/" rel="nofollow noopener">this link</a>. These are easy to measure with a caliper.Print and check your 3D-printer’s result for dimensional accuracy, tolerances, warping and deviations related to changes in printing parameters and material types.&nbsp;<h2>Features</h2><figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_page_features_main_image.png"></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Please see a complete list of each feature and correspondent descriptions below.&nbsp;<h2>The Hull</h2>The hull is a large, smooth overhanging curved surface that is challenging to 3D-print, and clearly reveals any surface deviations.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hull_curved_overhang-300x300.png" alt="Feature_hull_curved_overhang"></figure>&nbsp;<h2>Symmetry</h2>#3DBenchy is perfectly symmetrical which makes any skewness and warping easy to detect.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_symmetry-300x300.png" alt="Feature_symmetry"></figure>&nbsp;<h2>High-Resolution STL file</h2>The STL file is triangulated at a very high resolution which yields smooth surfaces. The maximum deviation from the original CAD file is set to 0.001 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_high-res_stl_mesh-300x300.png" alt="Feature_high-res_stl_mesh"></figure>&nbsp;<h2>Planar Horizontal Faces</h2>The top surfaces of the deck, box and chimney are planar, horizontal and parallel to the bottom plane.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_planar_horizontal_faces-300x300.png" alt="Feature_planar_horizontal_faces"></figure>&nbsp;<h2>Tiny Surface Details</h2>If you have a high-resolution 3D printer, this is where you can shine! The letters on the stern are less than 2 mm tall and the thickness of #3DBenchy’s nameplate is just 0.1 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_3DBenchy_nameplate_tiny_detail-300x300.png"></figure>&nbsp;<h2>Cylindrical Shapes</h2>The chimney is designed to define concentrical cylindrical shapes with inner and outer diameters. These clearly show deviations in roundness.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_conentrical_cylindrical_shapes-300x300.png" alt="Feature_conentrical_cylindrical_shapes"></figure>&nbsp;<h2>Overhang Surfaces</h2>Overhang issues are the Achilles’ heel of 3D printing. #3DBenchy offers several challenging areas such as in the difficult-to-reach inside of the bridge.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_overhang_bridge-300x300.png" alt="Feature_overhang_bridge"></figure>&nbsp;<h2>Low-Slope-Surfaces</h2>Low-slope-surfaces clearly show the layered structure of 3D printing. If printed horizontally, #3DBenchy’s gunwale and roof of the bridge will reveal the layer-steps.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_low-slope-surfaces-300x300.png" alt="Feature_low-slope-surfaces"></figure><h2>Large Horizontal Holes</h2>The rear window offers a large circular horizontal hole and the boat’s wheel offers a round difficult-to-reach secluded feature.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_large_horizontal_hole-300x300.png" alt="Feature_large_horizontal_hole"></figure>&nbsp;<h2>Small Horizontal Holes</h2>The hawsepipe represents a small short horizontal hole and has a very thin flange against the hull.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hawsepipe_small_hole-300x300.png" alt="Feature_hawsepipe_small_hole"></figure>&nbsp;<h2>Slanted Small Holes</h2>The fishing-rod-holder provides a very small slightly-slanted blind hole.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_fishing-rod-holder_slanted_small_hole-300x300.png" alt="Feature_fishing-rod-holder_slanted_small_hole"></figure>&nbsp;<h2>First-Layer-Details</h2>The shallow letters at the bottom of the boat clearly reveal typical first-layer-squashing.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_shallow_letters_bottom_plate-300x300.png" alt="Feature_shallow_letters_bottom_plate"></figure><h2> License</h2><figure class="image"><a href="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041.jpg" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041-1024x402.jpg"></a></figure>&nbsp;#3DBenchy by <a target="_blank" href="http://creative-tools.com/" rel="nofollow noopener">Creative-Tools.com</a> is licensed under a <a target="_blank" href="http://creativecommons.org/licenses/by-nd/4.0/" rel="nofollow noopener">Creative Commons Attribution-NoDerivatives 4.0 International License</a>. Permissions beyond the scope and typical usage examples are explained below.&nbsp;<h2>Feel free to …</h2><ol><li>… download the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> and 3D-print it as you please.</li><li>… give away and even sell 3D-prints of the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a>.</li><li>… <a target="_blank" href="http://www.3dbenchy.com/share/" rel="nofollow noopener">publish</a> images and videos of your 3D-prints – you own them!</li><li>… redistribute the unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> as you please. Such as hosting your own downloads, attaching to emails, including the file on DVDs, USB-sticks, and in software distributions, bundling the STL or pre-sliced print file with 3D printer kits, etc.</li><li>… experiment, be inventive and creative! We made #3DBenchy as a tool for playing around with and testing 3D printers. Improve your skills and challenge your machine and its software. Try every setting, variation and material you can think of!</li><li>… modify #3DBenchy for personal use. Feel free to publish texts, images and videos of your experimentation (these are your work and you own them!). Please respect the above list items regarding not distributing modified STL files of #3DBenchy.</li></ol><h2>Consistency</h2>#3DBenchy is designed to be a calibration tool for testing 3D print settings and comparing the performance of different 3D printers. Therefore it is important that the same unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">STL</a> file is consistently used for this purpose.<h2>Attribution</h2>We designed the little #3DBenchy boat and this expanding web page to help 3D printer operators on this planet to better navigate the vast sea of 3D printing possibilities!It is also meant to be a fun object to experiment with and discover 3D printing. If you enjoy #3DBenchy and the content on this site, please give us attribution in your publishings. Simply include the word <a target="_blank" href="https://www.google.se/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=%233dbenchy" rel="nofollow noopener">#3DBenchy</a> and the URL <a target="_blank" href="http://3dbenchy.com/" rel="nofollow noopener">3DBenchy.com</a>. The team behind #3DBenchy highly appreciates your help!