user_704294684

sipura

Hello everyone,&nbsp;There were many requests after the XL case to make an even bigger model if possible, and here we present it to you.XXL version of our modular cases.&nbsp;The internal width and length dimensions are the same as on the XL case, except that on this case there are 3 rows of internal containers.&nbsp;Inner dimensions are 194x168,5mm and height 145,2mm.&nbsp;<figure class="image image_resized" style="width:61.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812520/2024-03-17_195c783aa09e4.png"></figure>Big advantage is that the inner boxes are compatible with those of the smaller models Simple print, for handle you need support.All parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;The inner containers are made to fit tightly inside, if you want more space I recommend to reduce the model of the inner boxes a bit.&nbsp;Recommend: Dropp the inserts to a scale of 98% just makes them easier to get in and out of the box&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x32mm3pcs of screws M3x20mm&nbsp;For assemble handle you need:2pcs of screws M5x32mm2pcs M5 nuts&nbsp;I hope you like it, and enjoy printing and using this useful case.Feel free to put your pictures of printed models in comments. :D Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio. Enjoy printing

Utility XXL - case

Work

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

The Smoothy - Y Splitter Connector

yokoso

Makeup organizer with two different hole sizes (3 × 50 mm and 9 × 45 mm). Works best with bottles, flasks, etc.   <ul><li>Hexagonal shape</li><li>3 × 50 mm holes</li><li>9 × 45 mm holes</li><li>PLA</li><li>9h print-time</li><li>5% Infill</li></ul>Model on the picture printed with SUNLU Sakura Rose PLA+

Makeup Organizer

JC_Offroad (AKA - JeeperJC)

Custom Yeti lid Sliders! Remix from a plain Yeti replacement lid I found on another site, however I made significant changes to correct dimensions (it was not the proper side, too small for lid track, cited magnets didn’t fit in the recess, etc). So I cleaned it all up, ensure a PERFECT Magnet fit (see source for magnets I found on Amazon below, but any round magnet that measures a true 8mm x 3mm should fit fine).&nbsp;Print Details:NOTE: Due to fine details in Logo, you MUST print with 0.2 nozzle. (.4 or larger will result in missing text as the lines become smaller than .4 at this scale)Use 8mmx3mm Magnets:<a target="_blank" href="https://www.amazon.com/Magnets-Neodymium-Refrigerator-Building-Kitchen/dp/B09TQQHQLP/ref=sr_1_3?crid=2TY1Z1AX8PXDC&amp;keywords=8x3+magnet&amp;qid=1682919286&amp;sprefix=8x3+magnet%2Caps%2C188&amp;sr=8-3." rel="nofollow noopener">Grtard 50 Pack 8 × 3 mm Magnets for Crafts, Small Magnets, Round Magnets, Magnets for Fridge, DIY, Building, Crafts and Kitchen Cabinet, Office Magnets: Amazon.com: Industrial &amp; Scientific</a>Pause at layer 39 to allow magnet install (ensure correct direction to attract towards lid, gentle push is all that is required, no glue, perfect snug fit!)No supportsPainted - 2 Color (you can simply use this profile and select a single filament for the slider if you would prefer one color print)..10mm layer heightIron – All top surfaces15% InfillGyroidNo brim&nbsp;Be sure to check out my other uploads as I have created lids for a variety of Jeep models and other brands!

Ford Bronco Yeti Cup Magnetic Slider

auto

Maverick0197

I recently discovered the Sig Visor Stock and decided to draw it up for Airsoft use since I wear a full face mask that makes it near impossible to get a cheek weld anyways.I copied the folding mechanism off the folding stocks and braces that Mussy has made (which is based on the Scorpion Evo).See Mussy (<a href="https://www.thingiverse.com/mussy/" rel="nofollow">https://www.thingiverse.com/mussy/</a>) for the 1913 rail adapter, I am including the mounting adapter for an Airsoft Scorpion Evo.I printed the Pad out of TPU.I put support on the build plate and modeled in a part to support where the Pad mounts.I recommend adding some material near the back corner to keep it from warping off the bed as shown in the orientation photo.Update 08/19/2023: fixed Mussy link, attached a 1913 adapter designed by Mussy.&nbsp;<h3>Print Settings</h3>Printer Brand:PrusaPrinter: I3 MK3SRafts:NoSupports: YesResolution:.2Infill: 50Filament: PolyMaker ASA Grey

Work

p1s

fun

auto

2a