user_701029576

Creative Electronics

This is a modular stackable storage box.Printed with 0,2 mm Layer Heights, 2 walls and 10% Infill.You will find many different printprofiles (.3mf) of the model with the different patterns and modularity you can choose from. If you have any ideas to upgrade this model but don&#39;t want to make a remix, feel free to ask me down here in the comments and I will do my best to make it a reality! :) &nbsp;Down here you can see some UPDATES for the storage box (dd/mm/yyyy):&nbsp;UPDATE 31/05/2024: Connect multiple stackable storage boxes<ul><li>I made a connector which is easy and fast to print so you can easily connect multiple boxes to each other without worrying that they&#39;re going to wiggle</li><li>I updated the 3mf file &#39;Stackable_Storage_Box_ALL&#39; and you can find the connector on the last plate named ‘Connector&#39;</li></ul>&nbsp;UPDATE 05/04/2024: Higher versions for the drawers and holders + Compartments + Renaming:<ul><li>I made 3 different heights, eacht time for the drawers and all the differend holders</li><li>I made 2 compartments for in the drawers (H1 and H2)</li><li>I also added sections for the compartments but then a bit smaller so they fit perfect</li><li>I renamed everything: H1 (Height1) is the standard height, Now I also made H2 (double) and H3 (triple). There are now ‘Drawer_Sections’ and &#39;Compartment_Sections&#39;</li><li>I added 1 3mf file with everything (it&#39;s the one on top): Stackable_Storage_Box_ALL</li></ul>&nbsp;UPDATE 01/02/2024: New drawer with 4 different sections to choose from:All in 1 3mf File: Drawer+Sections.3mf<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062733/design/2024-02-01_5ca9aaebebc3b.png"></figure>I will upload some more different section patterns in the future, for now you have 4 choices + 1 having no sections&nbsp;UPDATE 10/01/2024: New patterns for the drawer holder and the top cover:<ul><li>Holder+Top_Cover_Blank.3mf</li><li>Holder+Top_Cover_Hexagon.3mf (Holder did already exist)</li><li>Holder+Top_Cover_Circles_1.3mf</li><li>Holder+Top_Cover_Circles_2.3mf</li></ul>UPDATE 07/01/2024: New variations coming:<ul><li>Different patterns for the holder + top_cover (DONE 10/01/2024)</li><li>Different sizes (bigger boxes) → You can scale the boxes in your slicer to the dimensions you like (DONE 29/01/2024)</li><li>Sections in boxes - new design so the dividers are modular (DONE 01/02/2024)</li></ul>&nbsp;&nbsp;This model was inspired by https://www.thingiverse.com/thing:2827563/files

Stackable Storage Box

drawer

LayerCake

A basic Gridfinity Parametric Container done in Autodesk Fusion and now updated with an identical OpenSCAD project for even easier customization.&nbsp;Based on the excellent Gridfinity system by Zach Freedman Wiki: <a target="_blank" href="https://gridfinity.xyz/" rel="nofollow noopener">https://gridfinity.xyz/</a>&nbsp;Differeces from the standard design:<ul><li>The lip has an added 0.4 mm flat section on top.</li><li>The screw holes are tighter and have a step pattern for better printability.</li><li>The base units can be overwritten which breaks compatibility but can use all space available.</li></ul>Some preconfigured models were added in height increments of 3U ranging from 1x1x3 to 4x4x9.For other sizes just use the Customize button or configure your own through Autodesk Fusion. Please do not share print profiles here that break compatibility. Label print profiles well according to their settings. All profiles shared by me use the default settings aside from gridfinity units.<h2>OpenSCAD</h2><h3>Customization Options</h3>The basic customization starts at the width, depth, and hight of the container in gridfinity units. Additionaly the hole pattern for screws and magnets can be configured or completely removed.On to of that the base units for the grid can be redefined. This will break compatibility with the standard gridfinity baseplates etc. but will allow for much more flexibility when filling a drawer completely with containers.An equally modifiable base grid can be found in my other models <a target="_blank" href="https://makerworld.com/en/models/476846" rel="nofollow noopener">here</a>.<h2>Autodesk Fusion</h2><h3>Configuration</h3>Open the file in Fusion and adjust the size as needed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000025376/design/2023-09-27_j5pt2zi2pyal.png"></figure>By default the magnet hole diameter is tighter than the standard 6.5 mm of the Gridfinity design as I found this to fit better. The depth has also been changed from the default 2.4 mm.<h3>Fusion Error</h3>If you design a 1x1 container the file will throw an error but the output should still be generated just fine. This is due to a pattern that no longer can be applied. If there is a way to suppress this let me know in the comments.<h2>Notes</h2>The Autodesk Fusion version was made with the personal version therefore non commercial only.The OpenSCAD version is licensed as MIT.Source files included.

Gridfinity Parametric Container

grid

EANE

I designed this pick inspired of Jazz III pick.Hexagonal holes gives the player a firm grip of the pick.Took inspiration from <a target="_blank" href="https://www.thingiverse.com/thing:3485707" rel="nofollow noopener">https://www.thingiverse.com/thing:3485707</a> to add holes for a grip.

Hex Jazz Style Guitar Pick

presents

Boss Tech Print Innovations

ordinal model was created by Pedro Costa Pereira from Printables. This Corner or side Silica Dry Box with Handles for Bambu Labs AMS will work with both the stock AMS as well as the Hyddra mod. Perfect for maintaining and controlling the humidity in your AMS. Works great at maintaining the proper low humidity in your AMS keeping your filament dry for amazing printing results! Works much better than the pouches/ packets. Would highly recommend checking out Silica Boxes for your AMS system to not only help improve filament longevity and quality. If you ever see your AMS Cabin Humidity drop below Green this will help fix that issue and maintain a proper low level humidity. Prefect to print with your favorite material, if you use a high heat material you can also use these Silica Boxes to re-dry your silica beads. &nbsp;&nbsp;

SIDE Silica Dry Box with Handles for Bambu Labs AMS Corners Hydra and Stock

desiccant 

mclanesmemories

Set of 3 Bookmarks - Viking Nordic Knotwork Carving in wood of Dragons. I am going a little thicker to add a few more layers and improve details.&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #5 (0.48 mm) swap Brown At layer #9 (0.80 mm) swap to Tan or Sand At layer #15 (1.28mm) swap to white

Set of 3 Bookmarks - Viking Nordic Knotwork Carving in wood of Dragons

misc

EngineerPro

See also V2 here <a target="_blank" href="https://makerworld.com/en/models/222069" rel="nofollow noopener">https://makerworld.com/en/models/222069</a> for a slightly different design.&nbsp;Low profile glass top LED riser with integrated stand for ventilation and reflector to focus the light inside the printer and reduce the light leakage out of the printer. Uses standard 10mm LED strip, approx 135 cm / 53 inches long. Uses a TPU liner for soft dampening of the glass top. Efficient design minimizes filament waste and easy print. Fits both X1 and P1 series of printers.Use a white or silver plastics for the reflector.See the effect of the LED light with and without reflector (using White matte PLA):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/630270/2024-02-27_b8a3c1f6766ac8.gif"></figure>&nbsp;

Slim LED riser V1 with integrated ventilation stand

light

3dmieks

Brick Stormtrooper&nbsp;I have setup and coloured all the plates with supports and support blockers&nbsp;Need White, Black, Grey, and Yellow PLA<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/IHH8wLNhOiY"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=IHH8wLNhOiY"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/IHH8wLNhOiY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

650% Brick Stormtrooper

toys

tsubus

I remixed this project found on thingiverse and adjusted some shapes that were not printable.&nbsp;The profile used in Bambu studio is the default 0.08mm Extra fine profile with the following modifications:&nbsp;walls: 4infill: gyroid 15%&nbsp;Copy of the description from the original designer <a target="_blank" href="https://www.thingiverse.com/jhoward679" rel="nofollow noopener">jhoward679</a>: Summarythis is a wip. i will be tweaking and adding files and information as i go. any comments questions or suggestions are welcome. these are a set of "precision" tools that are printable.WARNING: do not scale this project it will mess up the measurements. if something does not fit on your build platform you can either copy my original from tinker cad and adjust it to fit, or ask and i can see if i can break up the sets into smaller sets to accommodate.i am new to 3d printing having just built my kit last month and just started to design a few weeks after that, so any hints tips or advice is more than welcome. constructive criticism helps me construct better.after i built my 3d printer it took all of 3 seconds before the kids in my family wanted in. i am more than happy to share and teach, however i start to get teary eyed at the thought my expensive precision tools being destroyed by hyperactive 6 year old. being a tinkerer i have a large set of precision tools and know the importance of "the right tool for the job". i have also had more than one tool broken by someone abusing it because they didn't know how to use it properly or didn't care to. so now i can print a set for each kid, then they can all learn how to use them and start in on their own projects! and my tools can live for at least one more day!so far i have a set of feeler gauges designed for mm and inch. and a hole gauge set in the same. a 6 in simple ruler inch/centimeter with a v-block to help hold round objects in the center for marking. a set of simple calipers in cm and inch. a fillet gauge in mm and inch with convex and concave ends. a speed bevel to mark or measure angles quickly. more tools will be included in the final set. i hope that they enable people who are starting off in 3d printing and design to be able to have a precision tool set that is adequate for design and testing of their projects and machines. nothing replaces a quality set of durable precision instruments hence the quotation marks around precision in the title however this printable set should serve as a working set until better tools can be acquired, or may serve as a permanent set/loner set. plus its always nice to be able to simply reprint a broken or lost tool.Thanks to jbeegs30 for the correction on the inch gauge and the file upload.this set can easly save you at least $100. steel calipers ~ $10 fillet gauge mm ~ $15 fillet gauge in ~ $15 feeler gauge mm ~ $15 and usually not in the sizes we would use for 3d printing feeler gauge in ~ $15 and usually not in the sizes we would use for 3d printing hole gauge set mm ~ $ 20 $10 each hole gauge set in ~ $ 20 $10 each total ~$110<h4>Print Settings</h4><ul><li>Printer:</li></ul>Hictop Prusa i3<ul><li>Rafts:</li></ul>No<ul><li>Supports:</li></ul>No<ul><li>Resolution:</li></ul>.1 mm<ul><li>Infill:</li></ul>30<ul><li>Notes:</li></ul>print using the highest resolution settings that your machine can do. the print will take a lot longer, however it will result in a more precise tool with more durability. print with a brim for all of the files except the feeler gauges.<h4>Post-Printing</h4>post print finishing is needed&nbsp;to get the most out of the tools a good amount of finishing is required. any places on the prints that have any stringing or rough/uneven surfaces should be lightly sanded with a high grit sand paper 200+. for the feeler and fillet gauges i simply threaded a piece of string through the holes in the prints and tied a loop in the string so i can hang them over the workbench. leave enough slack in the line so that you can easily separate one of the tools from the others in the set.remember that if you dont have any tools to check an item with known measurements t&nbsp;<h4>How I Designed This</h4>how to&nbsp;i designed the tools in this set on tinkercad. links to the individual files will be added over time. you can click the links to tinker cad and undo/disassemble any of the sets to see how it was done.&nbsp;<img src="https://cdn.thingiverse.com/assets/df/00/dc/4a/d5/how_1.jpg" alt=""><img src="https://cdn.thingiverse.com/assets/01/ef/11/57/21/how_2.jpg" alt=""><img src="https://cdn.thingiverse.com/assets/5a/5f/ef/2f/9f/how_3.jpg" alt=""><img src="https://cdn.thingiverse.com/assets/1c/c8/f2/9e/25/how_4.jpg" alt=""><img src="https://cdn.thingiverse.com/assets/36/a9/7d/85/2f/how_5.jpg" alt=""><img src="https://cdn.thingiverse.com/assets/30/b2/4a/08/16/how_8.jpg" alt=""><img src="https://cdn.thingiverse.com/assets/12/bd/ce/c3/ff/how_10.jpg" alt=""><h4>Printable "Precision" Measuring Tools</h4>project name&nbsp;Printable "Precision" Measuring Tools.a collection of tools that can be used for calibration and testing of your printer and to use as a set of tools for measuring when designing a project.&nbsp;Overview & Background&nbsp;hopefully by completing this project you will learn about printer calibration, testing and bed leveling, then by printing your own set of precision printing tools you can learn how to use them properly and be able to recreate a simple object in as a 3d model.&nbsp;Objectives&nbsp;by participating in this build students will learn what the different types of precision tools are and how to use them to recreate an object of their choice as a model and print it. they should be encouraged to choose simple models but can tackle harder challenges if they wish.(start shameless plug) even a Sphero or Ozobot docking station obstacle or holder! (end shameless plug).&nbsp;Audiences&nbsp;this project is really applicable to any age i showed my 3 year old goddaughter how to use the fillet gauge and she was running around the house measuring the edges of everything and announcing the results, the kitchen counter, her moms phone, the rim of the toilet bowl, the handle of the sink after washing the gauges because she touched the toilet with them...ect.this project can be scaled from a simple show and tell as an introduction to the tools all the way up to a printer calibration test with a reproduction of a real world object using the tools and then a comparison of the printed model and the real world object to check for the accuracy of how the student used the tools.&nbsp;Subjects&nbsp;it really depends on how liberally you want to apply the tools to the lesson. these tools can be used as examples in a lesson or be the lesson itself. math, science, art, shop/handcrafts, design, really any subject that uses measuring.&nbsp;Skills Learned (Standards)&nbsp;after the project is completed depending on how the teacher presented the project and the level of difficulty they chose the students will all have an understanding of what precision tools are, how to use them to take measurements, depending on the scale of the lesson it can be used to calibrate and test the printer, take a real world object measure it and reproduce it as a model in tinkercad (or other cad software) and print it.&nbsp;Lesson/Activity&nbsp;this lesson/activity can be scaled to however large or small you want it to be.this can be a simple show and tell for friends family or the kids, or show and tell for the class room. this can be as simple as printing the tool that you want to show and bringing it into class or to your audience and explaining how the tool works, how it is properly used, and then passing it around and letting the student use the tool to measure an object of your/their choice then the students can write down the dimensions of the object and be graded by accuracy within a tolerance. you can print all of the tools in the set and do it all at once or spread it out over a period of time for example doing one tool a day.this tool set can also be used to test printer tolerances and calibrations in the classroom. the lesson could be about fine tuning and calibration of the machines. as we all know even the best machines need calibration and fine tuning which leads to better prints and a deeper understanding of how these machines work, which makes troubleshooting less of a mind altering, hair pulling, i cant believe the print failed at 90% completion, that's it im throwing this printer off the roof experience. the more you know about the printer the easier it is to trouble shoot. the printed tools can be checked for accuracy with other tools and then a better understanding of the accuracy of the particular printer will be gained.you can also scale this lesson all the way up to the level of for example having the student choose a real world object to replicate it using the printed and tested tools to measure the dimensions and create the model in cad software (i use tinkercad but there's a ton of great software out there). the student can then use the printed and tested tools to measure the real world object and the printed object to compare how close the dimensions are. the students could work alone or be put into groups depending on the resources of the facility. the final reproductions could then be graded based on accuracy.&nbsp;Duration&nbsp;once again the project can be scaled. if the tools are printed before hand and passed around the lesson can be as short as it takes to pass an example around the class. or if the teacher wants the whole class to print their own tools and reproduce an item it can be the entire class from start to finish.&nbsp;Preparation&nbsp;if the lesson is a simple show and tell to introduce the students to the tools, then there is no prep and the teacher doesn't even need a printer they can order a print off thingiverse. if not the facility will need a printer/s, an internet connection, and filament.&nbsp;References&nbsp;n/a&nbsp;Rubric & Assessment&nbsp;I am not a teacher so i don't have any experience in this. i guess for the show and tell you could pass an object around and have the students measure it with the various tools then they could fill out an answer sheet and be graded on accuracy. for the full scale of the project you could give a grade based of how close to a given tolerance the students given tolerance is to for example the reproduced real world object within +/-.1 is an A. +/-.5 is an B. etc... the teacher could adjust the letter grade of the tolerance based on the precision of their printer/s.&nbsp;Handouts & Assets&nbsp;n/a&nbsp;

Printable "Precision" Measuring Tools

tools

Filament King

Filament Shelf Storage System. The Filament Shelf file and the Stabilizer Panel models are the bulk of what is needed to build this system and both are being posted here.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445519/design/2024-04-27_8b7b6452e6ee8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445519/design/2024-04-27_5bf981f91efdc.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445519/design/2024-04-27_bca2ef8dae88f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445519/design/2024-04-27_5862abee7afbb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445519/design/2024-04-27_f851ed99c94b88.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445519/design/2024-04-27_ebcae78364ba28.png"></figure>

Shelfmeister Stabilizer Panels

organize

达文西FPV

中国古代乐器——洞箫G调适合入门The ancient Chinese musical instrument, the Dong Xiao in G key, is suitable for beginners

中国古代乐器——洞箫G调Ancient Chinese musical instrument - Flute Dong Xiao G key

music

user_819771961

This is yet another set of infill patterns. I wanted to just try to use all capabilities of the slicer / studio rather than using an app for the design. So the attached m3f is created with Bambu Slicer and design of the case etc. is all done in Studio.&nbsp;This is printed in ABS for the simple reason I liked the colour combination, but I am sure it can be printed in anything you want (maybe not so much TPU - never tried though). &nbsp;I did make some changes in terms of speed etc. - but that is because I printed this with a 0.4mm nozzle and I wanted to get the writing ok ish. So basically what you see here is printed with 0.4mm nozzle and adjusted speeds (95mm/s across all levels and 10mm/s for bridges / overhangs). &nbsp;The Process Settings this is coming with is based on 0.08mm and settings are based on ABS (Bambu brand) so obviously feel free to play with the settings.

Bambu Studio Infill Patters

swatches

EzzySziggy

Cute Easter Bunny in a Egg

decor

Stigern

V2 Added:&nbsp;Two new drawers, with split or four split.Added a stopper, stops it from being pulled all the way out.&nbsp;Simple drawer, stackable ontop of each others.&nbsp;Size is 125x150x60mm&nbsp;Great for sorting stuff.&nbsp;&nbsp;PS:&nbsp;If you enjoy my designs and maybe want to contribute, you can make a small donation to <a target="_blank" href="https://www.paypal.com/donate/?business=T3KK6HAMWRUPL&no_recurring=0&item_name=If+you+like+my+designs+and+want+to+contribute.&currency_code=NOK" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Stackable drawer/container

desk

Jan 3D

This is a new lid that works for the already proven Bambu Lab - Tools and Accessories BoxWhich you can find here:&nbsp;<a target="_blank" href="https://makerworld.com/de/models/42917#profileId-43846" rel="nofollow noopener">https://makerworld.com/de/models/42917#profileId-43846</a> This lid can store up to four fully assembled Hotends&nbsp;The old lid can be exchanged 1:1 for this lid, so only the lid has to be printed and not the whole box.&nbsp; Attention, during the construction I had to realize that Bambu Lab sends the Hotends with two different fans Please note this before you print out the wrong cover&nbsp;Herefore there are two versions of the lid, one version for the new fan.Please use the .3fm with the ending NEU / First Print Profile&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/219806/2023-11-24_2ac60fd7d99d38.jpeg">&nbsp;&nbsp;and one version for the old fan&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/219806/2023-11-24_209dd38661a0c.jpeg">&nbsp;Please use the .3fm with the ending OLD / second Print Profile&nbsp;The clearance of the cover has also been reduced slightly so that it no longer wobbles that much when it is in place.&nbsp;Have fun Printing!&nbsp;