Alex Électricité

paolobonidesign

Get ready to dazzle your guests this New Year's Eve with the RingDeer! This charming napkin ring, capped at a 10-character limit, features delightful reindeer elements including corna (antlers), orecchie (ears), and a cute nose. Perfect for adding a touch of whimsy and festive spirit to your dinner table, this accessory is not just functional but also a conversation starter. Compact and creatively designed, it's an ideal pick for those seeking to sprinkle a little magic into their holiday decor. Suitable for any napkin size, the RingDeer ensures your New Year's Eve is as enchanting as it is elegant.

RingDeer - Reindeer-themed napkin ring, perfect for New Year's Eve dinner.

Noël

Models

Tolerance Test Enclosed

Calibration

Jorge Rui

<h3>Instructions</h3>This is part of this project, <a target="_blank" href="https://makerworld.com/en/models/38282#profileId-37064" rel="nofollow noopener">Keychain and Tags</a> so you can change these documents to suit your needs. <h3>Print instructions</h3>In the case of Tags, it is necessary to indicate in the slicer in which area you want to pause to insert the magnet.<ul><li><a target="_blank" href="https://forum.bambulab.com/t/is-there-a-way-to-pause-at-layer-x-to-manually-change-filament/3005" rel="nofollow noopener">Bambu Studio and Orca</a></li><li><a target="_blank" href="https://forum.prusa3d.com/forum/prusaslicer/pause-at-height/" rel="nofollow noopener">Prusa Slicer</a></li></ul><figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/80578/2023-10-10_6kaxa07p89us.jpg"></figure></td></tr><tr><td>Magnet pocket on the back of the image</td></tr></tbody></table></figure>This is already prepared on the 3mf files available for download, but you can do it on your own.<ol><li>After a couple of minutes, the printer will pause, it's time to insert the magnet. It will not top on the socket but, should be easy to insert it. Do not hard press the build plate!<ol><li>CHECK THE MAGNET POSITION 2 TIMES TO BE SURE, it should attract in this position:</li></ol></li></ol><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/80578/2023-10-10_reii5ff46py3.jpeg"></figure><ol><li>Be sure that the magnet is nicely flushed, if it is above the print layer, do not continue. </li></ol><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/80578/2023-10-10_6hvyqss6941p.jpeg"></figure><ol><li>Resume printing.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/80578/2023-10-10_04mjipmc1llk.jpeg"></figure>This image, show the difference between a 0.2 and a 0.4mm nozzle:<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/80578/2023-10-10_b101523pzmah.jpeg"></figure><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.<a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">And check my other projects, maybe you find there something usefull</a>

Tags and Labels for the Keychain

Maison

Raynors_Workshop

National Sarcasm Society Coaster

Janick

3Deen-Druck

A simple tray for sorting your bricks! I've added a proper logo to match the other stuff the gifted person had, optimized print settings.Very good result in bambu marble pla!&nbsp;Attention: I've added fuzzy outlines and used ironing for the top layers. If you don't want or need those, you can disable it.PLEASE DO USE BRIM OR IT WILL WARP!&nbsp;Added a picture of the actual print :) &nbsp;Have fun!&nbsp;-------------------------------------------------------------------------------------------------------------------------------Please don't forget to LIKE👍, Comment ✍ and RATE ⭐⭐⭐⭐⭐ - it would be awesome! Thanks❣

Building brick sorting tray

Lego

braga3dprint

The 3D model of a lightbox featuring the Coca-Cola logo is a refreshing and iconic addition to any space. The classic Coca-Cola script and logo are meticulously recreated in this design, making it a captivating piece of decor. The lightbox, when illuminated, radiates the same warmth and positivity that a cold Coca-Cola can bring. Embrace the nostalgia and joy associated with Coca-Cola with this delightful lightbox. 🥤❤️🌟 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Coca-Cola Logo Lightbox LED Lamp

Light

snakester15

Spool holder that you can mount on the wall to store or use filliment from. Was designed around Maker Geeks 1KG spools which have a slightly smaller hole than most so the spool holder on my printer was causing alot of friction and under extrusion. Works fine with "normal" sized spools too but .5KG spools may not fit unless they were made specifically so they would fit on a larger spool holder. The weird corner seen in the picture isn't part of the design, i was just using really cheap filament (this uses around 250g) and it peeled up from the bed a little. threads are big enough so you can print the whole thing at .2mm or probably even .25.&nbsp;printed this with 15% infill and 4 shells, but its way stronger than it needs to be so 3 shells and 10% infill should be more than enough. printed with the left side (side seen in picture) parallel to the bed and with supports.&nbsp;&nbsp;&nbsp;

Wall Mounted Spool Holder

Print

creolet.marco.markl

Everyone is familiar with the various types of cable grommets for furniture panels. With Conduito, you now have the option to use a version specially optimized for 3D printing. By carefully studying existing models, I developed a variant tailored for 3D printing. This design allows you to produce a cable grommet directly with your own 3D printer.&nbsp;Conduito is available for a variety of hole diameters, from 35 mm to 125 mm, including common sizes like 40 mm, 60 mm, 80 mm, and 100 mm, as used by Forstner drills, for example. Calculating the diameter of the cable grommet is straightforward: hole diameter minus 10 mm. The panel thickness should be at least 15 mm.&nbsp;Complete information about this project, including links to both free and licensed versions, is available on its dedicated page in my Wiki. If you like my work, please hit "Like" and don't forget to follow my profile.&nbsp;Wiki (English): <a target="_blank" href="https://wiki.creolet.com/en/projects/conduito-cable-grommet" rel="nofollow noopener">https://wiki.creolet.com/en/projects/conduito-cable-grommet</a> Wiki (German): <a target="_blank" href="https://wiki.creolet.com/projects/conduito-cable-grommet" rel="nofollow noopener">https://wiki.creolet.com/projects/conduito-cable-grommet</a>&nbsp;Collection of all metric (mm) sizes: <a target="_blank" href="https://makerworld.com/en/u/1762145450/collections/67250" rel="nofollow noopener">https://makerworld.com/en/u/1762145450/collections/67250</a>&nbsp;Collection of all imperial (inch) sizes: <a target="_blank" href="https://makerworld.com/en/u/1762145450/collections/67249" rel="nofollow noopener">https://makerworld.com/en/u/1762145450/collections/67249</a>--- Drill hole diameter: 50 mm--- The print settings provided here are designed for a 0.4 mm nozzle and a layer height of 0.2 mm. The settings can be easily found in most common slicing programs like Cura, PrusaSlicer, or BambuStudio/OrcaSlicer.<ul><li>Wall generator: preferably Arachne</li><li>Walls: 3</li><li>Top layers: 5</li><li>Bottom layers: 5</li><li>Infill density: from 20%</li><li>Infill pattern: Any</li></ul>

Conduito - 50 mm Cable Grommet

Quincaillerie 

baumgart05

Schichthöhe 0,2Speed 0,20mmWandlinien 4Fülldichte 15%Füllmuster GyroidStützstruktur > Ja&nbsp;Ich selber habe Pteg cf benutzt.<a target="_blank" href="https://amzn.to/3Sk39wq" rel="nofollow noopener">https://amzn.to/3Sk39wq</a> &nbsp;&nbsp;Attention, this file is a test. It's my first file that I built. Layer height 0.2 Speed 0.20mm Wall lines 4 Fill density 15% Fill pattern Gyroid support structure > Yes I used Pteg cf myself.&nbsp;

Makita 18v Battery Wallmount for 3 Batterys bigger

Outillage 

Print4Gods

Spooky Halloween Skull bowlI've improved the print bed adhesionI Print it in PLA Glow Multicolor

Spooky Halloween Skull bowl

Halloween

ManiKing

er Duplo-Eisenbahntunnel wird nicht mehr von Lego verkauft, und auf dem Gebrauchtmarkt scheint er mir irgendwie überbewertet zu sein.So haben meine Kinder endlich ihren Tunnel bekommen! Und es kann auch eine Brücke sein, wenn Sie die Teile der Zugbrücke haben: Es ist die gleiche Höhe !Das obige Bild ist von meiner ersten Version, seitdem habe ich innere Abstandshalter hinzugefügt, um die Schienen im Tunnel zentriert zu halten (sonst könnte der Zug gegen die Wände stoßen)&nbsp;Ich habe es ohne stützen gemacht !

Duplo_Train

Duplo

wuguigui

<h2>Summary</h2>I designed a 3D print clip without spring, the separated jaw mouth could be optionally chosen according to different usage.This design had another important function is to put pressure on the jaw mouth constantly, so it will not be loose like other 3D print clips.I recommend PETG as the filament because it has better toughness, not bad when using PLA+. But I haven't tried ABS yet, someone could help to do it.If you like it, please click "like“ it:)Thank you!A new one was designed based on this clip, with suction cup: <a target="_blank" href="https://makerworld.com/en/models/12904" rel="nofollow noopener">https://makerworld.com/en/models/12904</a><h2>Print Settings</h2>Printer: snapmaker 2.0 A250 Rafts: No&nbsp;Supports: No Resolution: 0.2&nbsp;Infill: 60% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=snapmaker+PETG+or+PLA%2B" rel="nofollow noopener"> snapmaker PETG or PLA+ </a> any