user_693590994

JonnayLin

My wife and I tried making onigiri a little while back but she had trouble forming it right, so I designed and printed out a mold to help her out!Video: <a target="_blank" href="https://www.youtube.com/watch?v=xYvrjWH4Gsw" rel="nofollow noopener">youtube.com/watch?v=xYvrjWH4Gsw</a>

Onigiri Mold

Food

callanloomers

Have a very Merry Christmas with this easy to print Reindeer with articulated legs ~ no glue or supports required! &nbsp;The deer's body has flexible legs which allow it to lie down, stand or get ready to pounce once the model is removed from the build-plate. The body and head are printed separately to allow for more colors using just one AMS, and fit together with a friction fit.&nbsp;A couple notes on printing:<ul><li>I would recommend using 0.12mm layer height for a more detailed finish (and smoother motion), but if you want to save on filament with a multicolor print I had also had success with 0.16mm.</li><li>I would recommend using the color template provided, as ensuring all parts are the right color in the slicer can be a bit time consuming.</li><li>You might notice a warning pops up with the body regarding floating regions ~ don't worry! The model prints fine and these are just an artifact from small parts of the design.</li><li>Feel free to use the ‘scale’ tool in the slicer to make the models bigger or smaller. The provided STLs are around double the size of those on the build profile, and were scaled down in the Bambu slicer.</li></ul>&nbsp;Feel free to check out my <a target="_blank" href="https://www.tiktok.com/@callackk" rel="nofollow noopener">TikTok</a> for a video on how the model is made/printed.

Articulated Christmas Reindeer

Frannie

Mitchopitch

This is a remix from the Fidget Toggle Switch by user @kriswillcode.&nbsp;Its design is cool, but I wish it was more clicky.So I made a remix using Tinkercad.&nbsp;This is a simple print without any support.

Click Switch Fidget Print-In-Place

Gifts for Rose

STLWarehouse

This is an optimized print file for <a target="_blank" href="https://www.printables.com/@SanfordPrime_562474" rel="nofollow noopener">Sanford Prime</a>&#39;s excellent print-in-place Butterfly knife. I had to do some rework to ensure it printed at Bambu speeds, as well as optimize the print settings.&nbsp;Important notes:&nbsp;<ol><li>Do NOT enable support! You may get a warning of unsupported areas. If you add supports, it will likely ruin the print, and not release itself properly to be used.</li><li>DO NOT enable a brim. You would think a brim is harmless, and only helps in adhesion, but I had two back-to-back prints not work properly because the brim left a little extra right at the pivot joint. </li></ol>Just make sure your print bed is super clean, and use adhesion glue if necessary. This will only print properly vertically, which makes it more susceptible to print failure at regular speeds.&nbsp;Finally, this is such a clean print, I was able to print it in TPU! added a second print profile for TPU. I made the tolerances a little looser to get a good usable TPU print.

Butterfly Knife - Print in Place - Balisong

Gifts for le_boss

This & That

I made this tool for my mom so she could easily insert safety eyes into crocheted or knitted items :)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451942/design/2024-05-02_5420c8e21e6cc.gif"></figure>All that&#39;s needed is 1 m6x20 screw and a nut to thread onto it!Simply place each handle onto each other into the closed position, screw in the screw, and thread the nut on. How to use: Simply thread the pin of the eye and the back into the hole side of the pliers, and close them. The dimple will push the eye into place and voila, safety eye inserted!

Crochet Safety Eye Pliers

Lynn

Mananix

My organizer/drawers that fit Bambu reusable spools. You must remove the cardboard with the RFID that the tray&#39;s fit to the diameter of the spool. &nbsp;There are 4 different sizes and for each size a version which could be divided into smaller boxes. You could combine different sizes to match to your requirements in the best way.

Organizer for Bambu spools

Favorites

P8modeller

This is a model of an Aircraft Carrier and it even floats. There is also a version with aircraft on it. The two lines on the deck of the ship are the runway for takeoff and landing. You can play with it at bathtime or in the sink. The two “boxes” on the side of the boat are mainly for balance. The mast on the boat could fail so if you don&#39;t want to have any drooping filament lines, you can download the no-mast version. &nbsp;There are some printing requirements for it to float upright (size: 200mm)For the first 5 mm, print with 20% cubic infill, this is essential as it will act as a ballast to keep the boat from tipping over. After 5mm, you should print in 5% cubic infill for best performance during floating but you can experiment. You can also scale it up or down as you wish.&nbsp;Enjoy Printing&nbsp;If you want to edit the raw files, here is the Onshape Link:https://cad.onshape.com/documents/115d8137669785a463940d22/w/ca2dd3ea89aa3356702efd61/e/dff4b1169f491669f9a4a72f

Food

Frannie

Gifts for Rose

Gifts for le_boss

Lynn

Favorites

Boats for Johann