W00dChucker

KYZ Design

Designed for use with pocket hole screws (such as Kreg pocket hole screws or their alternatives) or pan/washer head machine screws. (V1 was designed for use with countersunk wood screws but that may split some 3D printed parts with weak layer adhesion)&nbsp;Holes are 4.3mm with 9.4mm counterbores designed for 4mm screws with up to 9mm screw heads.&nbsp;Enjoy!

Corner Brace V2 - Designed for 3D Printing - 3 Sizes

brakets, braces and building

MiscPrinter

I kept having my nozzles clog with hardened glue and was sick of cleaning it out. I designed this nozzle to fit Starbond 2oz CA Glue Bottles. I have tested it with their thick, medium, and super fast thin bottles. I created 2 different textures on the nozzles. A more traditional ridged version and a artsy spiral texture. Update 3/9/23: Minor geometry change. Added a model called “Seal” which is to be printed out of TPU. Can help seal the nozzle to the bottle.

Starbond CA Glue Nozzle

Tools

DavidsGotWood

Spool adapter/protector for all Polymaker (inc PolyTerra & Polylite), Overture and Inland cardboard spools. Perfect for the Bambu Lab AMS and AMS-Lite.&nbsp;My <a target="_blank" href="https://makerworld.com/en/models/29869" rel="nofollow noopener">original adapter</a> based on the Polymaker version works fantastically with polymaker and overture spools and the AMS but had some limitations. Namely, it had trouble fitting on the AMS Lite due to the inner lip and its rigidty came at the cost of its thickness.&nbsp;This redesigned version corrects all these issues and provides an even better fit with the cardboard spools. And unlike the super-thin edge-only adapters available elsewhere, this makes use of the oval-sphaped hole to provide a strong connection that wont slide around or slip off while in use.<h3>Notable features include:</h3><ul><li>Snug fit with all overture/polymaker spools (tested personally with multiple variations).</li><li>Better opening placement of the edge holes</li><li>Thin edge profile, making it a much better fit for the original AMS (without needing any conversions)</li><li>Thin face profile, making the spools less bulky and also reducing filament usage and print time</li><li>Enhanced edge clips which reduce damage to the spool edges compared to the orginal version</li><li>Makes use of the oval hole to privode a strong fit while in use, while also allowing easy removal</li></ul><h3>Printing</h3>Prints equally well in PLA and PETG. PETG is recommended to enhance its longetivity (due to better layer adhesion).<h3>Remixing</h3>This model can be remixed using the provided Onshape link or via your own tools using the provided Step file. Every dimension of this new model is parameterised, so can be easily customised for your own use.<a target="_blank" href="https://cad.onshape.com/documents/dbaebacda5b3cb0106ef3785/v/0b0eb1a6a016bc779810c7eb/e/b3a36ea65d7d2dbba3dd98f7?renderMode=0&uiState=65ad3cbc12d6634aec3d70de" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/641242/2024-01-20_862d67e6026cc.png"></a><figure class="table" style="float:left;"><table style="background-color:rgba(64, 200, 232, 0.094);border:1px solid rgb(64, 200, 232);"><tbody><tr><td style="border:1px solid rgb(64, 200, 232);padding:0.4em;">Note for Open Sourcing 3D Printed models:If providing 3D models under an Open licence, please be genuinely #OpenSource, release your source (CAD) files with your Step/STL files and make it easier for others to collaborate.</td></tr></tbody></table></figure>

Spool Adapter for Polymaker, Polyterra, Overture & Inland (AMS-Lite friendly)

D4V3IG

<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td style="border: 3px dashed hsl(0, 0%, 60%); text-align: center"><h3>A1 Mini cover for PTFE Tube Connector holder</h3></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 60%); padding: 30px">If you use the PTFE Tube Connector of the A1 Mini in a different location and want to cover the connection.</td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="border: 3px dashed hsl(0, 0%, 90%); text-align: center" colspan="2"><h3>Works well together</h3></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px"><a target="_blank" href="https://makerworld.com/en/models/440329" rel="nofollow noopener">A1 Mini handle with original spool holder</a>&nbsp;You can mount the original spool holder on this handle and choose between a fixed and modular variant for the PTFE guide. Best of all, you save space on your table.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/440329" rel="nofollow noopener">Go to handle with original spool holder 🡢</a></td><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452978/design/2024-05-10_486dedc0e33a9.webp"></figure></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px"><a target="_blank" href="https://makerworld.com/en/models/433767" rel="nofollow noopener">Flexible cable clip with 360 degree rotation</a>&nbsp;Flex cable clip holder with 360 degree rotation - perfect for 3D printers and e.g. Bicycle bowden cables or for movable cable management. &nbsp;<a target="_blank" href="https://makerworld.com/en/models/433767" rel="nofollow noopener">Go to Flex cable clip 360 🡢</a></td><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px"><figure class="image image_resized" style="width: 100%"><a href="https://makerworld.com/en/models/433767#profileId-338548" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452978/design/2024-05-04_2240ea77d7868.gif"></a></figure></td></tr></tbody></table></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452978/design/2024-05-18_850ad84bec34e.png"></figure>&nbsp;

A1 Mini cover for PTFE Tube Connector holder

A1 Mini

FBOrg@­DE-GG

I have been looking for a solution to keep my less frequently used bobbins dry or to dry them chemically with aggressive drying agents. I have succeeded so far with a prefabricated coil core. However, monitoring the condition of the desiccant proved to be difficult. This gave me the idea of integrating a hygrometer to save space. In order to display the correct humidity in the bobbin or the bobbin packaging, a few more tests were necessary. In the end, the best solution was to separate the hygrometer from the desiccant. Please make sure that you do not repeat my mistake when buying the hygrometers and buy the hygrometers with the large measuring range. My hygrometers show 20% as the smallest value. This already leads to increased water absorption until it becomes apparent that the desiccant has failed. In the end, I bought new hygrometers that measure from 10%. The function is great and after approx. 2 to 3 days a good desiccant starts to dry the filament. If you want very good results, you should regenerate or replace the desiccant after approx. 7 days if the filament is very moist. This is the only way to achieve minimum dryness. After replacement, the shelf life in a plastic film is up to 12 months.&nbsp;Spool at 0 hours:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480658/design/2024-05-31_bae9ae33b67dd.jpg"></figure>&nbsp;Spool after 10 hours<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480658/design/2024-05-31_7a992fc6a8508.jpg"></figure>(20% is minimum of this hygrometer)&nbsp;No print support is needed.&nbsp;My hygrometer<a target="_blank" href="https://www.amazon.de/gp/product/B07HK22QB2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B07HK22QB2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1</a>&nbsp;&nbsp;&nbsp;&nbsp;ich habe nach einer Lösung gesucht meine weniger oft genutzten Spulen trocken zu halten bzw. mit aggressiven Trockenmitteln chemisch zu trocknen. Das ist mir auch mit einem vorgefertigten Spulenkern soweit gelungen. Nur hat sich die Überwachung des Feuchtemittelzustands als schwierig erwiesen. Hier kam mir dann die Idee eine Hygrometer platzsparend zu integrieren. Um die korrekte Luftfeuchtigkeit in der Spule bzw. der Spulenverpackung anzuzeigen waren noch einige Versuche notwendig. Zuletzt war eine Trennung von Hygrometer und Trockenmittel die beste Lösung. Bitte achtet darauf, das ihr beim Kauf der Hygrometer nicht meinen Fehler wiederholt und die Hygrometer mit dem großen Messbereicht kauft. Meine Hygrometer zeigen als kleinsten Wert 20% an. Das führt schon zu einer gesteigerten Wasseraufnahme bis überhaupt erkennbar ist, dass das Trockenmittel versagt hat. Ich habe zu letzt dann nochmal neue Hygrometer gekauft die ab 10% messen. Die Funktion ist super und nach ca. 2 bis 3 Tagen beginnt ein gutes Trockenmittel damit das Filament zu trocknen. Wollt ihr sehr gute Ergebnisse solltet ihr bei ganz feuchtem Filament nach ca. 7 Tagen das Trockenmittel regenerieren oder tauschen. Nur so ist es möglich auf eine Minimale Trockenheit zu kommen. Nach dem Tausch ist die Haltbarkeit in einer Kunststofffolie bis zu 12 Monaten.&nbsp;&nbsp;

Dessicant Spool Core with Hygrometer

3dp stuff

Josh-3D

A tray for needle files! These are sized for some cheap-o ones I got from Harbor Freight. The grid size is 2x4. These are setup to work with the AMS for a two tone look, for a little extra. Featured here in Bambu&#39;s PLA Matte Charocal, and Bambu&#39;s PLA Metal Oxide Green.&nbsp;This is part of a range of Gridfinity bins I&#39;ve created to explore the idea a little further, in particular making inserts that&#39;d be suitable for like a tool chest. I wanted the color contrast too, of the dark cutaway against the color face, for a little extra visual contrast. Hopefully others will find these useful too!&nbsp;<figure class="image image_resized" style="width:651.547px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000435677/design/2024-04-19_d4fc546f64d.png"></figure>-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Gridfinity - Needle File Tray

Gridfinity

Duane777

Make a CR-Touch mountable after breaking the fragile mounting tabs.&nbsp;

CR-Touch repair

E3v2Neo Parts

bambaxp

Scraper for children, summer toy to use at the seaside with sand. Excellent, fun guaranteed.I printed it in pla and it&#39;s already quite resistant, if you want print it in PETG

Beach Scraper for kids

Kids

PDX CNC

We use <a target="_blank" href="https://amzn.to/48S7xbz" rel="nofollow noopener">Milwaukee's Inkzall markers</a> in our shop. We needed a quick marker holder on our CNC mill and made this quick magnetic marker holder that can hold your marker tip up or down.&nbsp;Prints with minimal supports that break off cleanly on inside.&nbsp;Printed in PLA.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/473501/2024-01-30_5488e3d7330de.gif"></figure>&nbsp;Needs 2ct – <a target="_blank" href="https://amzn.to/3uctDGC" rel="nofollow noopener">Magnets 0.25 x 0.25" Neodymium</a>&nbsp;Our Favorite Things for 3D PrintingIncludes Affiliate Links<ul><li><a target="_blank" href="https://amzn.to/3LGX09C" rel="nofollow noopener">Nano Adhesive</a> - Stop using glue sticks - this is 1000% better 😉</li><li><a target="_blank" href="https://amzn.to/3F6S4qw" rel="nofollow noopener">6mm Magnets</a></li><li><a target="_blank" href="https://amzn.to/3LLUkHF" rel="nofollow noopener">Plastic Debur Knife</a> - clean up plastic edges (brims)</li><li><a target="_blank" href="https://amzn.to/3tjdpuB" rel="nofollow noopener">Small Clamps</a></li><li><a target="_blank" href="https://amzn.to/48CusHU" rel="nofollow noopener">Assembly Glue</a></li></ul><a target="_blank" href="https://s.pdxcnc.com/?ref=makerworld-inkzall-holder" rel="nofollow noopener">PDX CNC Products</a>

Milwaukee Inkzall Marker Holder

Organization

anndrewww

Small key hook magnet. Uses two (2) Harbor Freight magnets (5/16" Diameter; 5/64" Thick).&nbsp;My magnets were a press fit, but a drop of cyanoacrylate glue (Super Glue) can be used if needed. Depending on your magnets, printer, and settings, the holes may need a little finessing with an X-Acto knife.

Magnetic Key Hook

Household

Darrare

Has 4 slots to fit build plates onto your honeycomb storage wall

Bambu build plate holder for HSW

stefapapo

I made a remix of the spool holder in the link below cause the original holder have the spool fixing behind the printer. i have my printer next to the wall so i re-designed it to have a better spool position for my setup.if you have the same problem as me this is the solution :)https://makerworld.com/en/models/40484#profileId-73212