Nice design. Good fit. Works as expected. Printed in PETG. Thanks

Quick print in PETG-HS. I used this to remove some touch up paint residue from a car. First layer / leading edge tends to bend/fold over quite quickly but this can be trimmed off and tool still used. Have realistic expectations. Will print another for P1S

Very pleased with finished print in Terracotta Matte PLA on P1S. Will add photo later.

Nice design. Printed 100% version which came out well on P1S with Terracotta Matte PLA for the main pumpkin part and Grey Transparent PETG for the stem. Internal support needed some force to remove but finished result was good. Will next try the 80% version with a transparent filament for the main pumpkin part so it will give a nice glow with LED tealight inside.

Successful print on P1S and AMS2 with Matte PLA. Useful tool. Thanks

Amazing surface finish using BL Matte PLA.

Pleasing design. First print came out very well overall but I will try again with some tweaks to the default profile to try to hide the seam, reduce stringing and improve the quality of the overhangs. Plan to print a couple more, using scaling. Will add photos later. Thanks for uploading.

Excellent result. Assembled well. I may try increasing the diameter of the filament hole pairs near the outer edge so it they match the original spools - they are a bit smaller on this print so the clips designed for the AMS 2 don’t fit.

Quick print and, so far at least, seem to work without issue on original BL spools in AMS2

Good design, good print. Works as expected.

Nice design with option to print in two colours. Quick print, no issues, easy to assemble. Works very well on toothpaste tube from full to empty, and satisfying to use.. Would recommend.

Important tip: you must leave completed swatches on print bed for several hours, before attempting to remove, or the thin 1 and 2 layer sections Willy it come off cleanly. Worked for me this way with Matte PLA.

Work perfectly, strong spring action, even in Bambu Lab Matte PLA.

Removing supports took a while but final result works well. Wife happy.

Nice design with two locking positions Prints quickly and came out well in Bambu Lab Mstte PLA

Great print and surface finish. Larger than expected, so will try printing scaled to 50% in X and Y.

Prints without issue and is functional, compact and economical in terms of filament. I’m very happy with the result. The fit and function are excellent. The form is essentially good and appears fine from a distance. Ideas for a version 2: the sharp edges around the controller slots might be nicer radiused/curved, There are visible steps and creases in some of the horizontal curves and transitions that could be refined and smoothed out. Maybe add a second part to either be printed in TPU or covered in a soft fabric/materal, which could clip into the top to protect the headset lenses. I might have a go once up to speed with Fusion…

Nice model. Lovely surface quality with Bambu Matte PLA, printed on P1S. Can’t really tell it is 3D printed as there are no visible layer lines or imperfections at all. Part orientation and support under top piece obviously helped and this came away cleanly. Threaded parts fit together well and I put coins in the base as suggested to add weight. I love the textured pattern on the outside of the domed base. Very happy with result.

Came out great using combination of Bambu PLA Basic and PLA Matte. Parts glued together easily with Superglue. Recipient very happy!

Printed without issue using Bambu Matte PLA and works as expected.