user_586376623

Lazy_Mardeux

I made a desiccant tray that snaps with the original desiccant cover for the Bambu Lab AMS.&nbsp;I simply used PLA and .2mm standard settings for printing.&nbsp;This should fit just perfect in your ams if it&#39;s the same as me. I bought it early 2024.To install the original cover on the desiccant tray, start by joining the part closest to you by first lining up the pimples with the holes on the cover, and then snap it with the tab on the back.The tray is placed in the AMS just like the cover alone would be placed; inserting the 2 front tabs in place, and snapping the back tab in place.&nbsp;NoteThe original cover holds most desiccant beads, BUT, smaller beads can get through the holes, so don&#39;t overfill and turn upside down.&nbsp;&nbsp;

BambuLab AMS Desiccant Tray w/ OEM lid

Bambu Lab Tools

Mountain Designs

Simple Nozzle / Cap for Silicon Tube / Gap Filler Dispensed from Caulking Guns.

Silcon Cap Nozzle

Tools

Mysstra hueforge

Bonito cuadro impreso en 3d de Anonymous siendo solidario y dando esperanza a una niña en un pais en guerra. He usado Hueforge para poder imprimirlo en 3dNice 3D printed painting of Anonymous being supportive and giving hope to a girl in a country at war. I have used Hueforge to be able to print it in 3d&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 6 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 6&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #9 (0.8mm) swap to Jade White At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swap to Red At layer #20 (1.68mm) swap to Jade White for the rest. &nbsp;

Bambu Lab Tools

Tools

kunst