This is a project i made on demonstrating how angular momentum is affected by the radius changing on the basis of the formula l = mvr. this is a simple yet well working model which can be used to show the real time working of the principle of angualr momentum. It is based on the apparatus used in a video by UNL Astronomy, titled “Angular Momentum”. Link to the video :https://www.youtube.com/watch?v=1Bdyrv3cc0M

Wanted some extra storage on my desk but couldnt find the right one, so i made one :) It also has an integrated holder for a set of 6 hand files. the holder's have cutouts of 6mm. please double check your hand files shaft diameter and confirm that it is less than 5.7mm for a clean functional print. the drawer has 1 large bottom drawer(31mm depth), 3 medium drawers(21mm depth) and one small drawer(14mm depth) at the top.

I purchased an air65, its batteries, charger and wanted a safe place to store it that also looked good. This model can hold the drone, 9x 300mah batteries along with the 6 port charger from betafpv. It also has extra space for the usb connector and extra parts. It has a cutout on the side so that the usb c cable can be plugged into the charger without having to remove it from the case.