0.2mm layer, 2 walls, 15% infill This is the black frame requiring printing it is not optional glue it to the fan part to make the basic model

0.2mm layer, 2 walls, 15% infill This is the fan handle

0.2mm layer, 3 walls, 25% infill The lid can just be attached to the barrel wall with hinges The infill is Archimedean spiral Thanks to the official engineers

0.2mm layer, 6 walls, 25% infill This is a simple lever

0.2mm layer, 6 walls, 25% infill This is a 180-degree articulated hinge, just glue it on

0.28mm layer, 4 walls, 10% infill This is an integrated base and casing

0.2mm layer, 10 walls, 30% infill This is a shape template and also reinforcement for the fan body

0.2mm layer, 2 walls, 15% infill This is the imitation pearl decoration for the outer ring

0.2mm layer, 6 walls, 25% infill Part Four: hinge parts, Print in Place no supports

0.2mm layer, 6 walls, 25% infill Third part: Bottom lever

0.2mm layer, 3 walls, 25% infill Part Two: Lid

0.28mm layer, 4 walls, 10% infill, Part 1: Outer cylinder (most 500ml cups will fit)

0.2mm layer, 2 walls, 15% infill This is the fan handle, print one copy

0.2mm layer, 2 walls, 15% infill This is the frame, print one copy

0.2mm layer, 10 walls, 30% infill This is a template for picking up fan leaves, I set it to hollow print

0.2mm layer, 2 walls, 15% infill Please print two copies of the pearl rings

0.2mm layer height, 2 perimeters, 15% infill, 10x10x10 simple box, smooth and sleek

0.2mm layer height, 2 walls, 15% infill, the dog head takes only a few minutes to print, cute and easy to make

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 100% infill