原味猫罐头

BC Designs

Mounting the external spool on the side for easier access, with added filament guide for smooth operation. &nbsp;&nbsp;Parts<ul><li>2 x 608ZZ bearings</li><li>1 x PC4-M10 Pneumatic Connector (optional, included filament arm for PTFE tubing for those without)</li><li>1 x m3 x 14mm or 16mm for the top screw hole (start with the smaller one first as can bottom out and get stuck easily).</li><li>2 x m3 x 18mm for the bottom screw holes.</li></ul>Connector: <a target="_blank" href="https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>&nbsp;Choose either the 3mf file with the PC4-M10 fitting, or the one with PTFE passthrough.&nbsp;Included 3mf file setup as follows:<ul><li>0.20 layer height @ 50% infil, I recommend PLA+</li><li>4 walls</li><li>4 top and bottom layers</li><li>Supports</li><li>Spool on 2nd build plate as I think the model looks better in 2 colours :)</li><li>Both filament arms included on build plate, remove the one you dont want.</li></ul>&nbsp;Assembly<ol><li>Spend a few minutes carefully removing the supports from the inner slots </li><li>Screw on the pneumatic connector to the filament guide and inert some bowden tubing. The PC4-M10s allow the tubing to pass through.</li><li>Screw to side of case using the top back case screw hole and the 2 original screw holes.</li><li>Slide on spool holder. </li><li>Slide on filament arm.</li><li>Detatch when not in use or leave as is.</li></ol>

Bambu X1C / P1S side mount spool holder v2

P1SC

威克

一把X022lr折叠手枪模型 不可发射 用于教学A model of an X022lr folding pistol Non-launchable For teaching图纸：链接：https://pan.baidu.com/s/1NDT6avuvNr52ZCsYO8kCog?pwd=ausw  提取码：ausw&nbsp;物料  materialM2*4M2*5M2*8M2*18M2*20M3*4M3*16M2nutM2gasketM3nutM3gasket&nbsp;spring （Wire diameter * outer diameter * length）：0.5*4*10  0.5*4*15  0.8*5.5*15Extension Spring with Loop Ends0.7*5*25（The length determines the strength of the shot）<img src="https://makerworld.bblmw.com/makerworld/draft/573771/2024-02-23_3487685767f91.png">&nbsp;Assembly detailsPlease use the green font to correspond to the name of the documentPlease use a small amount of grease on the trigger section<figure class="image image_resized" style="width:56.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/573771/2024-02-23_a6965edecf6f5.jpg"></figure><figure class="image image_resized" style="width:57.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/573771/2024-02-23_84b231ae1b7c6.jpg"></figure><figure class="image image_resized" style="width:56.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/573771/2024-02-23_9c9378573250e.jpg"></figure><figure class="image image_resized" style="width:57.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/573771/2024-02-23_acf9611dba3eb.jpg"></figure>&nbsp;

X022LR模型枪

其他

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

P1SC

其他

收纳