Ragnar the Great

LemonArts

Makita 18V Battery Wall Mount

garage

Freer

👍👍Please 🚀Boost this model if you like it, it really helps!👍👍&nbsp;Train whistle with a whimsical sound. My kids love it!

Stylized Train Whistle - With Lanyard Loop

Music

Funny

maruel

Leverage the Aux Fan and heated bed in your X1/X1C/P1S to act as a filament dryer.<h2>Printing</h2>The design is printing friendly (PC with 65° overhang or ABS with 50° overhang) and designed to maximize speed, minimize filament usage while having good thermal isolation properties.You should be able to get good enough results even if your roll is moist; permitting you to bootstrap your cooking.Print with ABS or PC. Do not use PLA or PETG because their melting temperature is too low.An option is to do the first with ABS so you can cook your PC. Then print it again in PC. That said, my ABS cover was able to sustain 95℃ bed temperature overnight just fine. As a matter of fact, the Bambulab Reusable Spool is made of ABS!The cover is designed for the AMS spool sizing, which is 202 mm in diameter and 70 mm wide.<h3>Print settings</h3>0.4mm nozzle, 0.20mm Standard, 10% infill, infill direction: 0°, rectilinear infill (20min faster than grid), Seam position Nearest. Optionally use brims if ABS, not necessary with PC.Use &#34;Auto Orient&#34; then &#34;Arrange all objects&#34; with &#34;Auto rotate for arrangement&#34; checked. It should put the cover at 45° on the bed.If not, place the cover top down at 45° on the bed by rotating 45° on the Z axis.Printing time is 5½h~6½h and uses less than 220g of filament.<h2>Usage</h2><h3>Cooking</h3>Do not use the Dry filament program in the printer. We can use slightly higher temperatures for better drying because of the airflow. ♨️&nbsp;Tested with both ABS spools (Bambulab) and cardboard spools (Overture, Polylite).<ol><li>Put the high temp plate.</li><li>Adjust the plate Z height at the level where the cover&#39;s exhaust is at the Aux fan.</li><li>Put the Aux fan and Chamber fans at 30%.</li><li>Increase the bed temperature to the desired level (between 70℃ and 95℃). See <a target="_blank" href="https://maruel.ca/post/bambulab_filaments/" rel="nofollow noopener">https://maruel.ca/post/bambulab_filaments/</a> for a one pager including bed temperature for popular filaments.</li><li>Let your spool cook overnight. Turn mid-cook if you are insomniac.</li></ol><h3>After cooking</h3>To cool down the plate, put the Aux fan and Chamber fans at 100% and press Home. Leave the door open and the bed should cool down within 3 minutes or so.Don&#39;t forget to switch plates if you print PLA or TPU.Note that if you take a high temperature cooking filament and directly put it in the AMS right after, the filament will have the AMS gears deform the filament a little. It doesn&#39;t seem to be a problem.<h2>Contact</h2>The design is fully parametric. Contact me if you want different sizes, either smaller or larger, or want to sell printed versions.

Filament drying cover for X1C/P1S

Spare-Time Hobbies

#Spare-TimeHobbies - www.Spare-TimeHobbies.com&nbsp;Buy a set here - <a target="_blank" href="https://sth.ecwid.com/products/Scale-Item-Road-Cone-Set-of-4-Flexible-p483897563" rel="nofollow noopener">https://sth.ecwid.com/products/Scale-Item-Road-Cone-Set-of-4-Flexible-p483897563</a>&nbsp;This is a simple road cone for your RC Crawler or Drifter. They are intended to be printed in TPU without supports. TPU will allow them to flex and bend so that they don't get broken while out on the rocks or pushing the limits of your drift car.

Road Cone for 1/10th Scale Crawler (TPU)

Bambu Lab

The 3D model is a specialized tool designed for use with Bambu Lab 3D printers. The tool is used to remove the gear while removing the clog in extruder. Below is the instructional video on how to use this tool.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=CLlT1RV-oJE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/CLlT1RV-oJE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;这个模型是专为Bambu Lab 3D打印机设计的专用工具。该工具用于在清理挤出机内的堵塞物时拆除齿轮。 下面是如何使用这个工具的教学视频。<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1XP411H7CR/?spm_id_from=888.80997.embed_other.whitelist&t=10&vd_source=a16e9f6a6e39585be4662120965e028e"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1XP411H7CR&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1XP411H7CR&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Gear Removal Tool

Guages

nokiri

A simple toy for toddlers to train their fingers. The coins can be easily inserted into the toy and roll out in a circular fashion. Easy to print with no support needed and the coins are big enough to not fit in mouth. My 1 year old loves it.

Baby Coin Thing

Toys

CeerOne_SAK

supporto per coltelli da cucina da utilizzare per tenere ordine e sicurezza all'interno dei cassettoni porta attrezzi e posate

garage

Music

Funny

ABS

TPU

Guages

Toys

Organize