Khaled

Fat Tony

Printable TPU o-rings that can be used to assemble the Dum-E handy desk buddy (https://makerworld.com/en/models/195554#profileId-217277) with permission given by the creator.&nbsp;These replace the need for cutting/gluing neoprene gaskets as called out in the original BOM. Simply fit the o-rings into place and screw down.&nbsp;The smallest groove (at the wrist) was too thin and unprintable even with a .2mm nozzle. The underside of the supports also came out too poorly to actually fit anything inside of the groove. The solution for that was was an oversized gasket that purposely doesn't fit in the groove which seems to work well. If slicing yourself: Print SLOWLY. These are very small and a very quick print that you want to be fairly accurate, the slower the better. I used a .4 nozzle with .08 layer height with .32 line thickness at 1mm/s MVF. YMMV especially depending on which TPU you are using.

Dum-E O-Rings

Gadgets

Storage

MazzoTV_04

This case is possible to use with other case to storage and maintain in order all the piece of your Arduino project.&nbsp;Approximate dimension of the Arduino:   68.5mm X 53.3mm - 2.69in X 2.09in

Stackable case for Arduino uno

Micro controllers

Rawsen Mitchell

Inspired by the Snap-Fly by cl@ytr0n, the Toroidal Snap Flier has the iconic toroidal propellers and more tame flight characteristics. I&#39;ve included the SolidWorks part file to let users customize their fliers as they please. It prints with no supports in about 10 minutes (with calibration times). All you have to do is download, print, and have fun!

Toroidal Snap Flier

Drone

BenniBiene

An 16cm high vase with a polygon pattern. The vase has thick walls and is therefore waterproof.

Vase with polygon pattern

h3li0

planter with pattern designed in fusion 360includes plate&nbsp;photo shows printed in matte blue PLA&nbsp;print profile included&nbsp;part of the patterned planter series:<ul><li><a target="_blank" href="https://makerworld.com/en/models/148633#profileId-162202" rel="nofollow noopener">planter with concave pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/148649#profileId-162217" rel="nofollow noopener">planter with horizontal pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/90177#profileId-96589" rel="nofollow noopener">planter with wavy pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/95872#profileId-102213" rel="nofollow noopener">planter with circle pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/98294#profileId-104777" rel="nofollow noopener">planter with zigzag pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108743#profileId-116153" rel="nofollow noopener">planter with polygon pattern</a></li></ul>If you enjoy using this 3D model and are able to, please consider supporting my work by <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buying me a coffee</a>. Your contribution goes a long way in fueling future creations. Thank you for being a supporter!&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table

planter with polygon pattern

Agriculture

user_1803088173

toys

mclanesmemories

The beauty of the Hummingbird - Flying amongst the flowers - Set of 3 Bookmarks&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA BambuLab Basic Black Transmission Distance: 0.6     PLA BambuLab Tough Lavender Blue Transmission Distance: 2     PLA BambuLab Matte Ice Blue Transmission Distance: 3.5     PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:     Start with Black     At layer #9 (0.8mm) swap to Lavender Blue     At layer #14 (1.2mm) swap to Ice Blue     At layer #20 (1.68mm) swap to Jade White for the rest.

The beauty of the Hummingbird - Flying amongst the flowers - Set of 3 Bookmarks

Book marks

Daniel's

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/440497/2024-01-22_9009ee35c44f5.jpg"></figure> &nbsp;Swap Instructions:Start with BlackAt layer #9 (0.48mm) swap to Jade White for the re

ANUBIS -HueForge

Archaeology

kisik20

New info: some including me wanted to create a smoke absorber for soldering, here is a new project:<a target="_blank" href="https://makerworld.com/en/models/495413" rel="nofollow noopener">https://makerworld.com/en/models/495413</a>ENJOY&nbsp;INFO: Hi guys, i have news for you. I made new crocodile clip. Clip is smaller and bether for work. Enjoy Clip is here:<a target="_blank" href="https://makerworld.com/en/models/492860" rel="nofollow noopener">https://makerworld.com/en/models/492860</a>&nbsp;Soldering Tool Holder. Adjust the support pipe arms, regulate the whole project. When 2/4 arms needed, only adjust the base arms, very convenient to change the height, angle of gripping without tedious and stiff to adjust arms one by one, or put items off and put on to change the orientation. More freely than traditional single helping hands arms and protect your precise item.&nbsp;1.The three to six hand tool quickens soldering,electronics, and DIY projects allowing you to finish your work faster than ever before! Our Third Hand makes positioning a breeze with2.base save space,Easy to carry,Free hands3.alligator clip tips for 360 degree rotation for easy operation and work4.Super compact design for an ultra portable third hand tool5.Very suitable for the complex difficulty welding such as model airplane repair, easy to clamp the solder and operation.

Soldering Tool Holder Flexible Arms helping hands

Tools

mikolaj.mazik

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;This time I decided to make a wheel loader model. Modeling took me about two days, another two days to print individual parts.Arm works identically to the real loader, the wheels rotate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577860/2024-02-18_0e01c095c5424.png"></figure>