pressprint

super mushroom container. printed with no support on the flsun super racer, depending on your printer you may need support for the small black eyes.the clearances in this design are 0.4mm so it can be printed without problem on any budget printer (at 100% scale)

super mushroom container 

emily

holonda3d

Ich habe diese Behälter konstruiert, weil ich eine schöne Aufbewahrungsmöglichkeit für meine verschiedenen Klebstoffflaschen an meiner Ikea Skadis-Wand haben wollte.Gerne mit Baum-Support drucken.

Behälter Ikea Skadis

3d printed 3d printer mods

zuperbuuworks

These masks were designed for you to paint and customise! Print them in matte filament for best painting results, colouring this way will blend better with any other features you put on the mask. For example; you could stick paper leaves or string vine designs down the antlers, sculpt ivy around the face with air-dry clay, or dab on some fake moss to the antlers to give it that “old woodland” look. It's your mask, make it look how you want it to!&nbsp;With the Year of the Dragon (wood element) around the corner, I decided to make masks to celebrate. Fae are spirits in my country, usually found in forests with large pointed ears, so I mashed them together with a Dragon to create these masks.Rather than uploading each elemental dragon mask separately, I am bundling them into this one profile. You can choose a Wood Fae (antlers) and a Water Fae (horns).&nbsp;Wearing the maskHoles for threading straps are found on the sides, below the ears. If you don't want to use these large holes, simply delete the “negative part” in Bambu Studio. A set of concealed holes can be found on the back of the ear base, where you'd find the default holes; these holes were added just in case you want to thread more straps for a better fit, or if you did not want visible holes on the mask exterior. They do, however, only take 1 to 1.5mm cords whilst the large holes can fit up to around 10mm thick cords. The thicker the cord/strap, the better. The mask was sculpted over a standard styrofoam mannequin head model (<a target="_blank" href="https://cults3d.com/en/3d-model/art/mannequin-head-full-size" rel="nofollow noopener">Find it here</a><a target="_blank" href="https://cults3d.com/en/3d-model/art/mannequin-head-full-size)." rel="nofollow noopener">).</a> This size fits all four of my family members, but the ears can make it a bit tight on those with a wide front temple. This mask fits children or smaller people best.&nbsp;Print Set-upAssembly is required. Due to the size of the masks, they are split into 3 sections: face, ear/horn left, and ear/horn right. They are attached via plugs. If the plugs do not fit, I recommend sanding them and trying them again. I would also advise you to glue them together to ensure they don't come off.Supports are required to print these masks; without them, the mask will not print well, if at all.<ol><li>Turn supports ON.</li><li>Set the type to “normal - Auto”.</li><li>Set the style to “Snug”.</li><li>The threshold angle should be unchanged (the default is 30).</li><li>Tick the “on build plate only” box.</li><li>If you don't want to use the narrow supports for the muzzle, simply use “normal - manual” type and paint a larger area on the muzzle like the below picture (the default supports haven't broken for me, but every printer is different)</li></ol><figure class="image image_resized" style="width:95.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/266883/2023-12-07_e600d2b7eff9f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/266883/2023-12-07_b966905c3dfe3.png"></figure><figure class="image image_resized" style="width:95.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/266883/2023-12-08_05311306b433a.jpg"></figure>Using a brim is optional, but is highly recommended, as the mask profile is narrow it is at risk of coming off the hotbed without the brim. The horns/ears should not need a brim at all, but it's safe to still use them.&nbsp;This file is for PERSONAL use. To sell prints of the masks, you must subscribe to my Patreon: https://www.patreon.com/thomastedwards

Year of the Dragon Masquerade Mask

dragons

Zetta Art

This is a remix. Added a base with ground, easier to print. Multicolor.

Burried troll skull (TES: Skyrim)

skeletons

3DMN

Blue Spirit Mask - Avatar The Last Airbender&nbsp;Totall Size x183 y180 z237Face Size approx: width 145mm and height 250mm&nbsp;&nbsp;If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>

Blue Spirit Mask - Avatar The Last Airbender

masks

Gatto

Frieren: Beyond Journey&#39;s End Chibi Figure&nbsp;From the popular manga and anime series, Frieren: Beyond Journey&#39;s End, comes this adorable chibi figure of the main character, Frieren! Our elf is 7 cm tall but can be resized to your liking. No print supports are needed with these dimensions, but if you modify them, they may be necessary!  <a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000396314/design/2024-04-15_4fefedc8921d9.gif"></a><figure class="image"><a href="https://makerworld.com/en/@Gatto" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000396314/design/2024-06-23_dbf03a232872e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener">Check out my profile for other models and follow MEOW!</a>