user_48729073

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Screw Gauge by Bambu Lab

工具

Ned Lex

This is a 3D model of a moon lamp cover that is designed to fit over a Xiaomi bedside lamp. It is made of PLA filament and has a realistic texture and color of the moon. It has two versions: one with a hole at the bottom for the cable and one without. The hole version can be easily attached and detached from the lamp, while the no-hole version can be used as a standalone decoration. The moon lamp cover creates a soft and soothing light that is perfect for a child’s bedroom.!!! Before printing, please make sure the tolerance on your printer and filament is suitable. The moon bottom diameter is 14cm. !!! Infill: 15 % Wall loop: 4 Layer: 0,2 mm Supports: only Brim for stability Approx. 33h of print

Xiaomi bedside lamp moon cover

家居

vanbluca

Hey guys!When I first saw the wireless bambu mouse, I knew I wanted to make one. Unfortunately, I was really bothered by the ugly sudden flat rear of the mouse. I decided to take matters in my own hands and remodel it with a more aesthetic organic shaped round rear. It could be slightly harder to print vs the original design, however I had no issues first try.I hope you enjoy this version!&nbsp;Edit:Since my original profile may cause issues depending on your bed adhesive, I have added a second profile with improved adhesion.

Wireless Mouse 002 - rounded rear

数码

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

3D打印

StephanBo

I got for a week the IKEA Skadis System with the goal to organize my private office. &nbsp;I hope you enjoy this organizer. &nbsp;inside measurement (7 times)Breite 33 mm x Tiefe 48 mm x Höhe 69 mm&nbsp;2 edited smaler T-Clips for colored skadis boards are in the print profile&nbsp;I created some stuff by using this as Connection:<h2>Skadis T-Clip System</h2><a target="_blank" href="https://www.printables.com/de/model/256896-skadis-t-clip-system" rel="nofollow noopener">https://www.printables.com/de/model/256896-skadis-t-clip-system</a>&nbsp;Printed with this Options (Organizer)<ul><li>2 walls</li><li>0.2 mm layer high</li><li>15 % infill</li></ul>Clips<ul><li>5 walls</li><li>0.2 mm layer high</li><li>15 % infill</li></ul>

Organizer Box 5 for IKEA Skadis - Connection T-Clip

洞洞板

IXPatch

This is a flexible, articulated Charizard. It can stand on its feet and has a flexible neck, tail and wings.&nbsp;It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Charizard - Flexi Articulated Pokémon

玩具

AU3D

A storage container measuring approximately 175mm x 125mm x 60mm, featuring 10 compartments, designed specifically for organizing cables.<h3>Compatibility</h3>This organizer is ideally suited for managing flexible cables such as USB data cables, short network cables (less than ~7 meters), jack cables, and composite cables. Essentially, it works best with any cable that is flexible and not overly thick or long. However, it is not suitable for thicker cables like HDMI, DisplayPort, some PD (Power Delivery) cables, or very stiff cables like Cat7 network cables, antenna cables, and similar types.

Cable Organizer Container / Box

收纳

finniminni

Please make sure, your print can handle the weight of your expensive camera before using this design. I do not take any responsibility for broken equipment.

工具

家居

数码

3D打印

洞洞板

玩具

收纳

摄影