user_427982203

fractalnoise

Imperial Librarium for epic scale (6mm) tabletop wargaming&nbsp;Choose between four variants: with or without a base and with open or closed (filled) windows/doors&nbsp;My other Epic Scale Terrain projects:<a target="_blank" href="https://makerworld.com/en/u/3965042544/collections/116782" rel="nofollow noopener">https://makerworld.com/en/u/3965042544/collections/116782</a>

Epic Scale Terrain: Librarium Building

Warhammer

maegu_

Wall Art - Pandas

brittany

Nick C

danospeti

This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. <a target="_blank" href="https://www.thingiverse.com/billyd" rel="nofollow noopener">https://www.thingiverse.com/billyd</a><h3>Print Settings</h3>Resolution:0.2mm Notes:You can add a raft or brim to help with adhesion. Adding supports to the underside of the belly can help as well, although many have printed it successfully without them.Post-Printing:Unfortunately, you will have to do a little bit of clean up at the undersides of the overhangs.

Cat Stretch Voronoi Remix

Lilly

wotfan

I recommend printing with a .2mm nozzle at .14mm layer height.&nbsp;The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive).

Multicolor Vault-Tec Logo Magnet

Branson

FormdbyLayers

Are you a Swiftie with a drink in your hand and nowhere to set it? Need to class up the dorm room a bit. Snag these minimalist Taylor Swift drink coasters and elevate any living space.

Taylor Swift Coaster - Solid - Red Circus

Adalynn

Donald Sayers

I needed one more accessory for my Trek costume. Boom! One piping hot Raktajino mug to hold my beers at a con. Might make some smaller versions for bottles and redbull sized cans.

Quark's Bark Raktajino Mug (Can Holder)

Startrek

3DPODesigns

UPDATE: Per requests in the comments, I've added a way to add weight to the Hex Paper Towel holder if you find it necessary. You do NOT need to reprint the paper towel holder itself. Simply print the “Hex Paper Towel Holder Plug” profile, fill the hollow portion of the paper towel base with sand/dirt/or weighted material of your choice and press fit the plug into the hollow hole in the base(I was able to add 150 grams of sand to mine). Make sure you leave enough room to push the plug down far enough to sit flat. I've included a small grip on the plug for ease of guidance, as well as removal with pliers if you ever feel the need. From my testing it does not need glue, but if you want it 100% permanent, please add a dab to the sides of the plug before inserting. Pictured below is the plug assembly,<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381832/2023-12-16_d456b79522b16.png"></figure><ul><li>This is a beautiful, functional, low filament using paper towel holder I designed for my own home. Using hexagons I've made this paper towel holder both strong and light using only 135 grams of filament and NO supports!</li></ul>&nbsp;<ul><li>Specifically sized to be printable on the A1 Mini!</li></ul>&nbsp;<ul><li>Keep in mind this model is again, light, so you may need to hold it while removing a paper towel. However, I found with even my own metal holder at home I still had to do that 90% of the time, so the filament savings seemed like a worthy trade off.</li></ul>&nbsp;<ul><li>This paper towel holder should fit most small to large rolls (though I've only tested a few I have access to)</li></ul>&nbsp;<ul><li>I've included both Default Speeds and Normal profiles as my testing with PLA at Default Speed settings was great, but if you want to print in PETG it can have flow issues, so just make sure your flow rates are tuned if using the fast profile. I strongly urge you to use the normal profile if you are unsure of your flow rates. I do not have a tuned profile for A1 mini, but I've included a fast profile that should work fine as long as your flow rates are tuned. Please let me know if you have any issues with it (I printed both the fast and normal profiles a total of 5 times each, but your experience matters!) and feel free to upload your own A1 profiles!</li></ul>&nbsp;<ul><li>If you enjoy this model please toss it a like!</li></ul>&nbsp;&nbsp;

Hex Paper Towel Holder

Kitchen Stuff

cale.lebl

<div><h1>Summary</h1><div>Evil Plants! These are the corrupted evil version of our other plant sets plus an evil rock.Here are the non-evil versions: <a href="/thing:4712691" rel="nofollow">https://www.thingiverse.com/thing:4712691</a> <a href="/thing:4652454" rel="nofollow">https://www.thingiverse.com/thing:4652454</a>These were test printed on an EPAX X1. </div></div>

OpenFoliage Evil Plants - Fully Supported

pauls_3d_things

This is a simple caliper. Print both parts separately to save time. The slider has to be printed upright, and you will need to experiment with xy-hole-compensation for a good fit.

Simple Caliper

Tools

neal.mi

A simple pencil vase with hexagon patten and chemical elements “ Be Ni Ce"&nbsp;&nbsp;