user_4269154973

Westersund Design

WD Bambu Lab X1/X1C Essentials to organize your tools, accesories and plates. All the models have slots on the backside to fit <a target="_blank" href="https://www.amazon.se/dp/B07RT9MY52?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">neodym magnets</a> with a size of 6x2 mm. I made the Bambu Lab logotypes/fonts separate to minimize wastage, glued them in with a dab of superglue.&nbsp;<ul><li>The left tray will fit various tools and containers, the left tray consists of 2 pieces that are glued together. I store a spray can of PTFE to coat the nozzle (I spray on a Q-tip) when printing PETG, different types of glue, a utility knife, a large scraper, a de-burring tool, a small plastic scraper, brass brush, a fine side cutter, a razor blade, a pointed plier and some Q-tips.</li><li>The right tray will fit 4 plates and a bottle of IPA (No, not the beer). The right tray consists of 2 pieces that are glued together, the larger piece will print best in a printer with bigger build plate but can be printed in a Bambu Lab X1/X1C with the use of supports.</li><li>The Hepa-Filter Housing uses 4x <a target="_blank" href="https://www.amazon.se/dp/B0C44YK6V2?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Hepa-filters</a> made for iRobot Roomba e5/e5154/e6/i7/i7+/i7156/i1/i3/i4/i8.</li><li>The Poop Chute have through slots on the sides to make it easier to see when it&#39;s time to empty it. The inside is smooth to prevent the poop from clogging the chute. ;)</li></ul>

WD Bambu Lab X1/X1C Essentials

LMet89

I designed this sled tower for organizing filaments inside one of my pieces of furniture.Having many reels and many colours, I thought I could organize the spaces as best as possible. Being designed with a slide, it is possible to remove and insert each reel as desired and it is also possible to turn it upside down to make multiple rows both above and below a shelf or shelf.I printed everything in PLA and PETG, as desired. Only 2 screws are needed for each individual tower.

filament spool support

Jannes

With tree support and 0.2mm layer height: 266.56gModel printing time: 4h42m

08

11

12