TommyEPapá

AXIOM Prints

The 16-22mm high folding lid riser is quick to print and does not require any gluing or screwin

Creality K1 and K1C Lid Riser 16-22mm Ventilation Grille

Swiss3D

Hi,&nbsp;As promissed, sharing the newest version which allows you to place 3 even 4 AMS on top of each other.<ul><li>Compatible with all AMS versions now. Including kickstarter AMS version.</li><li>Only 6 pieces. Literally less than a minute to assemble.</li><li>3 times more stable compare to previous version.</li><li>This design successfully uses AMS itself for stability. No additional piece behind the AMS needed.</li><li>Still duplo brick compatible in case you would like to reprint a piece. Your children would be happy to use old pieces, my kids really enjoy having pieces which I didnt eventually use as I had to print several different versions during prototyping.</li><li>Customizable on Bambu Studio. Used bambu studio negative part function for the holes in the tall pieces, you can change shape of those negative parts, add text etc. to personalise your stand. Sharing a photo of a version where I added text “Bambu Lab”.Please share photos of your customisations.</li><li>Printing<ul><li>For 2XAMS<ul><li>Print “plate 1” and “plate 2”.</li></ul></li><li>For 3XAMS<ul><li>Print “plate 1” twice and “plate 2” only once.</li></ul></li><li>For 4XAMS<ul><li>Print “plate 1” three times and “plate 2” only once.</li><li>Use print profile “Wall Braket” to fix AMS tower to the wall when you have 4 of them on top of each other. </li></ul></li><li>Print profile “lite version” is for those who would like to use their existing duplo brick pieces for the walls. Only 12 hours of print.</li><li>Use only &#34;Outer Brim&#34;, no inner brim.</li><li>*IMPORTANT*<ul><li>To avoid heat creep, keep door and the glass lid open while printing tall pieces if you are using P1S, X1C or X1E. I lost one print due to this. I normally print everything with door and lid closed but these are tall pieces and requires good cooling.</li><li>I had difficulty fitting two pieces together with one filament as the filament didn&#39;t have good dimentional accuracy or 225 degree was too high. In this case you can train holes by attaching them to real duplo pieces for a night and they will fit with a little force next morning.</li></ul></li></ul></li></ul>&nbsp;&nbsp;&nbsp;

AMS Stand (Tower) - Up to 4XAMS - Duplo Compatible

SK07 Skipper07

I created this Bambu Lab container out of necessity, I needed to have spare parts for printers etc. on hand.I hope it can be useful to you too.

Bambu Lab Container

box 

Next1level

Fan Cover for Flsun V400, can be replaced by the original cover without any modifications.No support required, easy to print.&nbsp;

Transformers Fan Cover for Flsun V400 

V400

SMichaud

Triangle model → <a target="_blank" href="https://makerworld.com/en/models/164364#profileId-180465" rel="nofollow noopener">https://makerworld.com/en/models/164364#profileId-180465</a>2 Set Model → <a target="_blank" href="https://makerworld.com/en/models/175061#profileId-192531" rel="nofollow noopener">https://makerworld.com/en/models/175061#profileId-192531</a>ZigZag Model → <a target="_blank" href="https://makerworld.com/en/models/182401#profileId-200920" rel="nofollow noopener">https://makerworld.com/en/models/182401#profileId-200920</a>10g filament total (1+1symetric)+-40minutes printEasy installNice fit

Z Axis Cover protection (Hex)

Hupgrade Bambu

Cayouche

I used those led -https://a.co/d/7SEqwCd&nbsp;socket of the base is a direct fit for the led stick

Pikachu lamp

lampada

pt.robot

This adapter allows you to use SUNLU filament spools on the Bambu Lab A1 mini's AMS lite color changer. Otherwise these spools don't fit because their inner spool diameter is too large.&nbsp;This is a somewhat unique design that is faster to print than some other common adapters. It relies on a little slot that the SUNLU spools have to lock the adapter in place. There is a corresponding peg on the adapter that fits in that slot. Note the spool hub is slightly tapered, and it's easier to insert the adapter peg-first from the side farthest from the slot. Just align the peg so that it will click into the slot. I included some pictures which should explain it better - it's simpler than I'm making it sound. :)&nbsp;There's always a chance SUNLU will change their spool design, but I have also included the original Fusion 360 file in case you need to make modifications.&nbsp;I hope you find this useful!

Adapter for SUNLU spools to fit A1 mini AMS lite

adattatori

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

Organizer

MatejB

Tablet or phone holder for car backseat. Mounted on front seats headrest.<figure class="media"><div data-oembed-url="https://youtu.be/daxH6tBSDYI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/daxH6tBSDYI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>You can try to print mount for my Toyota headrest dimensions. If it will not fit, you can change it in f3d file in Fusion 360. There go to Modify → Change parameters. Check the photos for parameters descriptions.&nbsp;The mounting dimensions between mount and holders are compatible with <a target="_blank" href="https://www.printables.com/model/449110-universal-tablet-holder-for-carsheadrest-fully-pri" rel="nofollow noopener">this project</a>. So you can combine mounts and holders between these 2 projects.<figure class="image image_resized" style="width:30.15%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/2024-04-18_c0140bbdf2bb.png"></figure>&nbsp;Included phone and tablet holders with printed spring. Tablet holder is in 2 variants, for clamping of 100-140mm dimensions, and 140-180mm dimensions.&nbsp;Notes:<ul><li>You can print headrest mount with PETG, but based on my experience, in hot summer days the PETG deforms under the load. So you may loose flexible properties. Recommending to print with material with higher temperature resistance than PETG.</li><li>I printed phone/tablet holders from PETG and so far didn&#39;t have any issue.</li><li>Don&#39;t try to configure negative tilt angle in parametric mount. It will work as a positive value. In order to achieve negative tilt, just flip printed part upside down since it is symmetric in this direction.</li><li>After the print, there might be tiny bonds between the sliding and static part. You may need to use some tool to initially push the sliding part. Then sliding has to work fine.</li></ul><figure class="image image_resized" style="width:287.812px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/745d8e41-120b-4a8c-a58e-ce08e7a852c7.png"></figure><ul><li>On demand, in the files is available 3mf project for tablet holder for 180_210mm dimension. However this tablet holder was not tested by me, so please keep in mind this. Feel free to share you experience with it.</li></ul>

Parametric tablet/phone holder with printed spring

Stand car Tablet

Northern Printworks

This fits over the release of the Bowden tubes on the AMS side. It allows it to stay on then with a press it can help release the Bowden tube from the AMS. This is 1 part of 3 for the A1 Mini Bowden tubes I have designed. Take a look at the others such as the Bowden tube supports and Bowden Tube Release for the hotend side. A1 Bowden Tube Release Hotend Side: <a target="_blank" href="https://makerworld.com/en/models/78665#profileId-82986" rel="nofollow noopener">https://makerworld.com/en/models/78665#profileId-82986</a> A1 Bowden Tube Supports: <a target="_blank" href="https://makerworld.com/en/models/78732#profileId-83046" rel="nofollow noopener">https://makerworld.com/en/models/78732#profileId-83046</a>

A1 AMS Bowden Tube Releaser Tool

Creatività in 3D

<h2>Fiat 500, old Italian car. Scanned and coloured. The roof can be glued separately as well as the front license plate. Length 20cm</h2>Print with P1S and AMS&nbsp;Printing with tree supports

Fiat 500

auto

LuCa91

Una passione in un semplice portachiavi.Veloce da stampare e facile da assemblare.Se oltre al modello 1:10 volete stampare il modello 1:8 vi basterà ridimensionare il TUTTO a 110.<ul><li>0.4 nozzle</li><li>0.08mm extra fine</li><li>2 pareti</li><li>15% giroide</li><li>supporti</li><li>brim</li></ul>Buona stampa.

keychain RC 1:10

portachiavi

Melle

This easy and simple tool to make your lubrication of z-axis and x-axis allot easier. This print only takes 10 mins and uses less than 0,32 grams of filaments. &nbsp;Click here to download my y-axis lube helper<a target="_blank" href="https://makerworld.com/en/models/383940?from=search#profileId-284079" rel="nofollow noopener">https://makerworld.com/en/models/383940?from=search#profileId-284079</a>

A1/A1 mini z/x-axis lube tool 

I present to you the latest stool variant I made.Completely modular and easy to print.To ensure some resistance during its use,I used ASA material to print the feet with a 25% infill and 7 perimeter lines.For the rest I used PLA.

Stool Wheel

home

PRINTINGlab

Description: Bring home classic elegance and timeless romance with this refined Amor and Psyche statuette. The 15 cm tall STL model masterfully captures every detail of this iconic mythological representation, offering an unparalleled 3D printing experience.Key Features:<ul><li>Impeccable Details: Every aspect of the sculpture is precisely rendered, from the grace of the figures to the intricate texture of the drapery, ensuring an end result of extraordinary beauty.</li><li>High Quality: The model has been carefully optimized to ensure high-quality 3D printing without compromising on fidelity to the original design.</li><li>Ideal Dimensions: Standing at 15 cm, the statuette fits perfectly on shelves, desks, or as a central piece in display cases, adding a touch of mythological charm to your decor.</li></ul>Recommended Materials: This model adapts wonderfully to a variety of materials, such as PLA, ABS, or PETG. The choice of material will influence the final appearance of the statuette, providing flexibility in customizing your project to suit your unique style.Add a touch of culture and beauty to your home with this unique Amor and Psyche statuette. Download the STL model today and embark on your fascinating journey into creating 3D artworks that capture the essence of mythology and timeless aesthetics.

Amor and Psyche Statuette High-Quality STL Model Love and Psyche statue statue home ornament decor 

Arte

ghostchili3d

very nice model, very difficult to print. only for real experts! it would be better to print it at 200%! The model is fully articulated and if you print it in metallic colors it will be the ruler of the universe.

Voltron 

giocattoli

G3DS

Having trouble handling the tiny lid handle for your Sunlu S4 filament dryer like i do? here is my solution, now i can grasp the lid handle with 2 fingers without violence… just slide in the left and right handle sleeve upgrades, no mods or surgery needed

Sunlu S4 filament dryer LID BIG knob HANDLE UPGRADE

sunlu

Gearhead

If you want to organize your household or keep things in shape, this is the best alternative that you can encounter; it can hold brooms, mops, tools, and whatever else you can fit in it. It has three mounting holes so you can place it anywhere and take advantage of its functionality wherever you need it.

Gravity tool holder

casa

Eminent3D

Quick little mount for a Ryobi Router. Printing in PETG with 4 walls, 15% infill and .20 height

Ryobi Router Mount

Ryobi

make 3D

Filament sample tiles including a 20 pcs sample holder.These are very handy when selecting the right color for your multicolor prints.&nbsp;Each tiles prints in about 20 minuttes.&nbsp;Tiles are made for:PLAABSASAPETGPCTPUPLA-CFPETG-CF&nbsp;Updated on December 12th:&nbsp;PA12-CF (Only stl file)PA6-CF (Only stl file)(I will make more on request)&nbsp;They measure 40mmx40mmx3mm.The tiles come with a ironed top surface with room for a decent sized label or sharpie to identify the exact brand or color.

Filament Sample Tiles with holder (PLA, ABS, ASA, PETG, PC and many more)

campioni filamenti 

homer4evr

This is a reworked version of this great model <a target="_blank" href="https://www.thingiverse.com/thing:5541988" rel="nofollow noopener">https://www.thingiverse.com/thing:5541988</a> if you make this please go heart his model too.&nbsp;Johnny stands about 40 inches tall and has a Amazon Alexa echo in his chest with a led sound module feeding leds in his mouth whenever its playing sounds. <a target="_blank" href="https://www.amazon.com/gp/product/B09FJL2VL2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B09FJL2VL2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1</a>&nbsp;I used an old usb cable for the smaller hydraulic lines. I printed mine in Sunlu silk pla+ all outer walls at 40/mms. I attached all parts with ca glue and activator and for the shoulder and elbow pegs I use tape to make the joint tight so it can still move but lock in place.&nbsp;Due to file size I uploaded as draft quality, i printed all mine at .2 layer height with 15% infill and 3-4 walls&nbsp;Also more than one part can fit per plate it was having issues uploading full plates.&nbsp;&nbsp;&nbsp;Supports are a per plate situation and all are not the same, you will need to pick the best option for each print, I already have the parts in the best orientation to print. The 4th slot is swapped out for the red toolbox

Short Circuit Johnny 5 Alexa holder 3/4 scale 

Vari

WildWolf_3D

Base/Peana Máscara DeadPool!&nbsp;Diseño realizado para exponer máscaras de DeadPool escala 1:1. Está pensado para imprimir con impresoras con sistema de multifilamento.Para montarla es necesario:&nbsp;-Paquete de modelos 3D.-Tuera hexagonal M8 DIN934 → x2-Arandela grande M8 DIN9021 →x1-Imán redondo de 7x2 → x16-Varilla roscada M8 L335mm (está medida se puede ajustar escalando la funda de la varilla, por si quieres que la máscara quede más alta o más baja).&nbsp;La máscara que se ve en las fotos es diseño de Do3D, pero sirve para cualquier máscara de deadpool impresa en 3D.&nbsp;Espero que os guste!

Deadpool Mask Base/Stand - MARVEL

marvel

paglini.mike

Modern decorative vase with a minimal style

Minimal Vase _ Modern Design

vasi

Kit Crafters

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_c8748237aa818.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_9ee42934cb225.webp"></figure><h3>Marble Rollercoaster with Filament Rails</h3>Hey all! When I was a teenager, I was gifted a kit called SpaceRail where you assembled a rollercoaster for marbles. It consisted of metal rods and a roll of plastic wire that formed rails. I recently, remebered this and thought it might be interesting to 3D print it and use filament as the rails, so that the whole kit (minus the marbles) can be made at home!&nbsp;The FilaCoaster consists of several block types, connectors, and a board to assemble everything on. Everything is put together with 3D printed screws and threads; a screwdriver model is included in the set to help with assembly. The marble sizes supported are 14-17 mm marbles (the Bambu Lab Marble Run Kit comes with 14 mm marbles).<h3>Parts:</h3><ul><li>Blocks:<ul><li>Riser - PLA - These blocks screw together to create supports to hold the rails up</li><li>Rail Holder - PLA - These blocks go on top of a stack of Risers and hold the Angled Rail Connector</li><li>End - PLA - This block goes at the end to catch the marble</li></ul></li><li>Connectors:<ul><li>Angled Rail Connector - PETG - This attaches to the Rail Holder with a pressure fit and can be attached at an angle</li><li>Floating Rail Connector - PETG - These are attached intermittently between Angle Rail Connectors to keep the rail a consistent width</li></ul></li><li>Board Pieces:<ul><li>Board - PLA - This prints upside-down; use the Board Screws to attach Risers</li><li>Board Screws - PLA - These connect Risers to the Board</li><li>Screwdriver - PETG - This assists in screwing in the Board Screws</li><li>Rails - PETG Filament - Raw PETG filament is used for the Rails</li></ul></li></ul>Here's the parts labelled in the slicer:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_77df06a680ca9.png"></figure>&nbsp;The parts connecting to the filament rails should be printed in PETG. PLA worked okay in my prototyping, however they broke very often when snapping in the filament while PETG allows for very easy assembly. If you must use PLA, I recommend a PLA+ or PLA Meta filament that is more flexible and stronger. The filament rail can also be raw PLA filament, but be warned it's harder to shape for the rollercoaster than PETG, and again, PLA+ or PLA Meta will be more workable than PLA.<h2>Build Instructions</h2>After printing all the parts, here's how you can assemble your custom FilaCoaster.<h3>Step 1:</h3><figure class="image image_resized" style="width:66.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_5e41e4602006d.jpg"></figure>Put a screw in the desired hole of the board, from underneath.<h3>Step 2:</h3><figure class="image image_resized" style="width:66.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_bba4c5adee18a.jpg"></figure>Hand screw or use the printed screwdriver to screw a Riser Block onto the Board.<h3>Step 3:</h3><figure class="image image_resized" style="width:65.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_ccdbe3018e07e.jpg"></figure>Attach more Risers to increase the height of the coaster support tower.Step 4:<figure class="image image_resized" style="width:65.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_f360750c77e57.jpg"></figure>When you're done stacking Risers, screw on a Rail Holder to the top of the tower. The whole support tower can be rotated to angle the Rail Holder however you'd like.Step 5:<figure class="image image_resized" style="width:65.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_67253de2deae6.jpg"></figure>To finish the support tower, press fit an Angled Rail Connector onto the Rail Holder. The Angled Rail Connector can be angled side to side to better fit your custom coaster path.&nbsp;Repeat these steps with shorter towers each time along your custom path. When the support towers are done, you can begin snapping in the filament onto the Angled Rail Connectors to create the rails. The filament rails can be snapped in by hand, but using simple pliers can make it much easier. Use the model image as a guide on how often to put Floating Rail Connectors along your track. Finally, screw in an End Block to the board at the end of your track and your FilaCoaster will be complete!&nbsp;For those with the Bambu Lab Marble Run Kit, I've also created a Spiral Lift machine that turns your rollercoaster into an endless ride!&nbsp;<h3><a target="_blank" href="https://makerworld.com/en/models/171965#profileId-188789" rel="nofollow noopener">Check it out here: Spiral Lift</a></h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/495762/2024-02-04_7a739a097eac8.webp"></figure>&nbsp;

FilaCoaster - Filament Marble Rollercoaster

giochini

Olivier3dPrint

Printed in 0.2 for the clock and clock handsClassic clock mechanism found on Amazon or Aliexpress.&nbsp;Imprimé en 0.2 pour l'horloge et les aiguillesMécanisme d'horloge classique trouve sur Amazon ou Aliexpress.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/rukZ3cdSoWE"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=rukZ3cdSoWE"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/rukZ3cdSoWE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>

k1c

Ams

box