0.16mm layer, 4 walls, 15% infill

Modification

Test file, needs TPU and PETG

For custom plate arrangement, use spiral infill and ensure 4 or more walls

Bone Knife Blade Replacement

First revision of the screw… likely a mix-up from previous modifications, corrected, this is a replacement part

Anomalous threaded screw replacement part, 15-minute print time, 1.85g I will revise and re-upload the model configuration today, and will send a notification upon correction

0.16mm layer, 4 walls, 15% infill

Do not arbitrarily alter my plate arrangement

A1 mini single plate

Aesthetic cutter head, replace the first plate

Single-color single-plate

The depicted cutting head is not the default one; for aesthetic cutting heads, the first plate may be omitted

Add supports, this profile is recommended for the A1, unless you are supremely confident, do not alter the plate arrangement

Please use PETG filament for printing. For load-bearing components such as bow arms, do not use low-strength filaments. Do not arbitrarily change my settings; this may cause parts to be unusable

0.16mm layer, 4 walls, 15% infill

0.16mm layer, 4 walls, 15% infill

0.16mm layer, 4 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

Finger Patch