情久

星骸造物-StarK

&nbsp;------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;<a target="_blank" href="https://makerworld.com/zh/models/36833#profileId-35112" rel="nofollow noopener">精度组装测试-Assembly test 来自 星骸造物-StarK - MakerWorld</a> <a target="_blank" href="https://makerworld.com/zh/models/29604#profileId-26030" rel="nofollow noopener">《sacru osse》SH-01 prototype 圣骸原型机 来自 星骸造物-StarK - MakerWorld</a>&nbsp;<a target="_blank" href="https://makerworld.com/zh/models/46328" rel="nofollow noopener">《sacru osse》SH-01 一体打印可动手 2.0 SH-01 is suitable for all-in-one printing activity palm version 2.0 来自 星骸造物-StarK - MakerWorld</a> ------------------------------------------------------------------------------------------------------------------------------------------------------------<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/132315/2023-10-30_da5f9311817e6.jpg"></figure>

《Howling Celestial bow》WZ-01 神机啸

装饰摆件模型

Many24

Collection of all parts needed to make a drybox out of the famous <a href="https://www.ikea.com/cz/cs/p/samla-krabice-s-vikem-transparentni-s69440822/" rel="nofollow">IKEA SAMLA</a><h4>This collection contains:</h4><ul><li>Pneumatic air fitting holder</li><li>Magnetic box for silica gel </li><li>PTFE tube plug</li><li>Cover clips - made by <a href="https://www.thingiverse.com/thing:2110134" rel="nofollow">Wookbert</a></li><li>PVC pipe mount with outside filament holder - made by <a href="https://www.thingiverse.com/thing:743280" rel="nofollow">wstein</a></li></ul><h4>Hardware required:</h4><ul><li>Pneumatic air fitting - PC4-01</li><li>M4x10mm bolts</li><li>M4 nuts</li><li>6x3mm magnets</li><li>32mm PVC pipe</li><li>4/2mm PTFE tube</li><li>Silica gel</li><li>Humidity sensor (optional)</li><li>Seal for cover (optional)</li><li>and of course IKEA SAMLA box</li></ul>

IKEA SAMLA Drybox set with magnetic silica holder

3d打印MOD

marekzeman91

<h3>Study board with numbers for kids.</h3>For easier studying try to print it with more colors. I decided to make each row with different color so the kids can learn in groups by color.<h3> </h3><h3>Printing tips</h3><ul><li>Infill: use as little as possible for the board (I used 10%) to keep the board light.</li><li>Bending: use glue stick or spray to keep your print hold on the plate.</li><li>Size: suggested to print at 100%. Should print fine even at 50% due to added spacing.</li><li>Numbers: print them as they are in the model, it will make the top surface perfect.</li></ul>

Board: Numbers

mod模型

Makefy

Cute and childish hanging storage bins for your organizing needs. All parts prints beautifully without any supports - I recommend using adaptive layer hight.Bins in the photos are printed with Polymaker PolyTerra: Banana Mint Arctic Teal Candy

Cute Storage Bins

各种盒子模型

Adam L

Change log:<ul><li>Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. </li><li>Added Overture Army Green PETG (4/20/23)</li><li>Added California Filaments Matte Black PETG (5/2/23)</li><li>Added California Filaments Golden Yellow PETG (5/2/23)</li><li>Added California Filaments Glow (clear) PETG (5/2/23)</li><li>Added Prusament Matte Black PETG (5/6/23)</li><li>Retuned Prusament Galaxy Black PETG (5/19/23) - *updated settings.</li><li>Retuned California Filaments Teal, Fluorescent Orange, & Cloudy White colors (5/28/23) - *updated PA Values, improves edge cases & wall strength.</li><li>Added Prusament Ocean Blue PETG (5/29/23)</li><li>Added Prusament Carmine Red PETG (6/4/23)</li><li>Updated/Retuned Prusament Matte Black PETG & California Filaments Clear PETG (6/5/23)</li><li>Updated/Retuned California Filaments Yellow PETG (6/11/23)</li><li>Updated/Retuned AMOLEN Rainbow PETG (7/1/23)</li><li>Added Prusament Chalky Blue PETG (7/19/23)</li><li>Fixed a mistake in Prusament Carmine Red PETG min layer time (7/20/23)</li><li>Added Prusament Yellow Gold PETG (7/20/23) - this filament tunes fine, but man is it an ugly color. Do not recommend unless you want the color of bile. They should've called this “diseased yellow”.</li><li>Added Prusament Transparent Orange PETG (7/28/23) </li></ul><h4> </h4><h4>What this is:</h4>This is a collection of all of my PETG filament profiles for all filaments I've used of this type. I happen to have a decent amount of <a href="http://referrals.californiafilament.com/rV8091rv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxNTg0NzYyODA5fQ%3D%3D" rel="nofollow">California Filaments</a> because I've found that brand works well with this printer, and you can push the flow rates higher with it than some others. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filaments (see <a href="https://www.printables.com/@AdamL/models" rel="nofollow">my models here</a>) and you should find, by category:<ul><li><a href="https://www.printables.com/model/457260-tpuflexible-tuned-x1c-print-profiles-for-bambuorca" rel="nofollow">TPU / Flexibles</a></li><li><a href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow">Nylon/PA and PACF variants</a></li><li><a href="https://www.printables.com/model/457321-pc-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">Polycarbonate & Polycarbonate-CF</a></li><li><a href="https://www.printables.com/model/457248-pla-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">PLA / PLA + / Silk PLA</a></li><li><a href="https://www.printables.com/model/457271-absasa-tuned-x1c-print-profiles-for-bambuorca-slic" rel="nofollow">ABS / ASA</a></li></ul>CHT-Nozzle versions also available (0.4 mm , Brass)<ul><li><a href="https://www.printables.com/model/539704-chtnozzlepetg-tuned-x1c-print-profiles-for-bambuor" rel="nofollow">PETG</a></li><li><a href="https://www.printables.com/model/540552-chtnozzlepla-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">PLA</a></li><li><a href="https://www.printables.com/model/542033-chtnozzletpu-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">TPU</a></li><li><a href="https://www.printables.com/model/542058-chtnozzle-asaabs-tuned-x1c-print-profiles-for-bamb" rel="nofollow">ABS/ASA</a></li></ul><h4> </h4><h4>How to use:</h4> These 3MF files are designed for use in Orcaslicer/Bambuslicer, but will work best in Orcaslicer, because it supports using a fixed pressure-advance value in the slicer. <ul><li>Load the 3MF file for the filament of your choosing. Files are named as <Brand>__.3mf.</li><li>(optional, recommended): Save the filament and/or print presets for your own use to your user presets for future use.</li><li>Remove the calibration cube dummy object and put your desired object in.</li><li>Print! But, turn off flow calibration option in your prints! The more reliable PA value stored in the filament profile will be used instead, and you can skip the wasted startup time, too!<ul><li><img src="https://media.printables.com/media/prints/455802/rich_content/dcbf8f87-13d5-4362-a0f5-c9b1a895b70a/image.png#%7B%22uuid%22%3A%22ff02b71c-6cd6-4ebc-b38a-446080d43e9e%22%2C%22w%22%3A440%2C%22h%22%3A110%7D"> </li></ul></li><li>If you want to use these in Bambu slicer, you won't get the PA values applied automatically sadly, and you'll have to do that with a <a href="https://forum.bambulab.com/t/flow-calibration/892/15" rel="nofollow">manual GCODE in the filament's start GCODE</a>. This is really annoying to do for each filament, but it does work. However I suggest you try Orcaslicer for this reason.</li></ul>&nbsp;<h4>Important notes:</h4><ul><li>These profiles are tuned on an X1C, with a hardened steel 0.4 nozzle installed, for use with a range of layer heights. If you have a different nozzle size or nozzle kind (steel/brass), these will be only starting points and you should re-tune most of the variables except maybe temperature.</li><li>Each 3MF also contains some of my own optimized settings for 0.16 mm prints, which I typically use, but these tuned filament profiles are designed/tuned to work across a variety of different print profiles.</li></ul><h4>Background:</h4>I use the <a href="https://github.com/SoftFever/OrcaSlicer" rel="nofollow">Orca Slicer </a>variant of Bambu's slicer because it offers finer-grained control over the slicing process and makes tuning and using tuned filament profiles much easier than Bambu's official slicer, which lacks good calibration routines for some of the most important variables in good printing: flow rate, pressure advance, and temperature and volumetric flow limits. This is particularly true for Bambu's Pressure Advance (<a href="https://github.com/bambulab/BambuStudio/issues/348" rel="nofollow">they incorrectly call this “flow”</a>) calibration, which forces you to run it every time and is unreliable, particularly on the popular textured PEI surface.Each of these profiles has been tuned for:&nbsp;<ul><li>Flow rate (aka extrusion multiplier)</li><li>Pressure advance (aka linear advance)</li><li>Temperature (with temp towers)</li><li>Volumetric flow limits (my settings are a little conservative based on printing the max volumetric flow rate calibration inside Orcaslicer)</li><li>Overrides (I typically try to avoid using these unless I have to)</li></ul>&nbsp;Disclaimer: These are free to use, and I do not own the OrcaSlicer calibration cube model, i'm just using it here as a convenient way to distribute the profiles.Disclaimer: The CA filaments link in the description here is a 25% off-first-order coupon link, but I'm not affiliated with CA filaments in any way, and they did not ask me to make this post.

- PETG - Tuned X1C Print Profiles for Bambu/Orca-Slicer

测试模型

landlord_rentz

I didn&#39;t like other options I found, so I just threw this together quick in fusion. Works great for my needs. I ran it with 6 walls on a 0.4 nozzle and 20% infill with 0.2 height.

Grocery Bag Carrier Handle

生活用品模型

Amao Chan

A hungry polar bear fails to reach the fish held in the naughty seal’s mouth. Everytime the polar bear tries to catch the fish, the seal will sink back into the water and tease the poor, hungry polar bear.&nbsp;In fact, polar bears are indeed always famished because of the worsening condition of the planet due to global warming, and the North Arctic has become warmer than usual. On top of this, the melting of the ice has shrunk the polar bears’ living area, and made it difficult for them to hunt. There are many signs telling us that polar bears and the polar ice caps are slowly disappearing.&nbsp;The design, Polar Bear with Seal, was a paper DIY for the magazine Young Scientist. I really liked the concept, so I redesigned it into STL files. I hope this piece of art can convey a sense of beauty both in motion and stillness. While I was designing this, I put a lot of effort into observing the subtle changes in the movements of polar bears. In order to make this design work via 3d printing, I adjusted every component’s angle. Very few parts require supporting material.&nbsp;Ultimately, this art piece took me the longest time to design, and it’s the most complex one I have ever shared. I am extremely happy with the outcome!&nbsp;<a target="_blank" href="https://youtu.be/2ga2XGnS2OA" rel="nofollow noopener">https://youtu.be/2ga2XGnS2OA</a> <a target="_blank" href="https://youtu.be/UWyBoHDMF1g" rel="nofollow noopener">https://youtu.be/UWyBoHDMF1g</a>&nbsp;Thanks to SpiderMaker for sponsoring the creation of this work.<a target="_blank" href="https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F" rel="nofollow noopener">https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F</a>&nbsp;Material used SpiderMaker PLA Matte Paper White/Matte Iron blue/Matte Steel Blue/Matte Orchid Purple/Matte Peacock Green/Matte Coal Black&nbsp;Print suggestions 1.Layer height 0.2mm 2.Low down the flow to 90%or 95%. 3.Add oil on moveable parts&nbsp;<a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a> <a target="_blank" href="https://www.facebook.com/paperworkers/" rel="nofollow noopener">https://www.facebook.com/paperworkers/</a>&nbsp;北極熊與海豹調皮小海豹從浮冰的縫隙中探出頭來，用嘴中叼的魚逗弄著北極熊；當飢餓的北極熊揮掌搶魚時，海豹總是快一步的把頭縮回海面下，看樣子吃不到魚的北極熊要餓肚子了。 事實上，北極熊真的是處於挨餓狀態中！全球暖化，北極氣溫不斷上升，造成北極的海洋冰層融化，使得北極熊的活動範圍縮小、食物變少、獵食變得困難，許多跡像顯示北極熊正和北極海冰同時消失中！&nbsp;《北極熊與海豹》這個作品，原本是我為《科學少年》雜誌所設計紙製DIY作品；我很喜歡這個有趣的構想，所以把它重新設計為stl的版本。我希望這個作品在動與靜都能呈現美感，所以在設計時，特別注意北極熊在姿態上的微妙變化。為了配合3d列印工具的特性，調整了每個零件的角度；只有很少數的零件，在列印時需要設定支撐。《北極熊與海豹》是我目前分享的作品中，耗費時間最多、設計難度最高，但最後的設計成果，我很滿意！&nbsp;感謝 SpiderMaker 織造者 贊助本作品之創作&nbsp;使用材料 SpiderMaker PLA 消光白色、消光鐵灰藍色、消光鋼青色、消光蘭紫色、消光暗綠色、消光黑&nbsp;製作建議 1.層高0.2mm 2.流量降到90-95 3.組裝完成後在移動零件加些潤滑油。

Polar Bear with Seal (automata)

可动玩具模型

ralf.hoerhager

<a target="_blank" href="https://www.printables.com/de/model/418290-sanding-wedge-v2" rel="nofollow noopener">Printables Link</a>&nbsp;General informationAs you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. &nbsp;The new design is Fully 3d printed, no bolts or nuts needed.&nbsp;Technical detailsThis sanding wedge is made for 50mm wide sandpaper. The sandpaper must be at least 310mm long for the original version and 225mm for the small version.I recommend you buy a roll of Sandpaper that already has the desired width and then cut it to length.&nbsp;Here are some I found on Amazon: <ul><li><a target="_blank" href="https://amzn.eu/d/5q3raSU" rel="nofollow noopener">Bosch DIY Sanding Roll for Metal 50mm 5m 120 Grit </a></li><li><a target="_blank" href="https://amzn.eu/d/gXm8hH8" rel="nofollow noopener">Klingspor 4224 - KL 361 JF Sanding Rolls with Fabric Backing, Brown, 50 x 25000, Packaging Unit 1 - Grain 180</a> </li></ul>&nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

Sanding Wedge V2

工具模型

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo duo drawer module 30. It is a spin off from the BaBo organizer system and was designed to be used under the AMS. The <a target="_blank" href="https://makerworld.com/de/models/16351#profileId-15232" rel="nofollow noopener">AMS adapter</a> must be mounted at the top. If you want to place this module on your printer and dont use the <a target="_blank" href="https://makerworld.com/de/models/51390" rel="nofollow noopener">riser</a>, I recommend using the <a target="_blank" href="https://makerworld.com/de/models/14135#profileId-14112" rel="nofollow noopener">20mm feet</a> so that the drawer does not collide with the display.&nbsp;It is not compatible with the other [BaBo] organizer modules, but with the inserts!&nbsp;&nbsp;The usable dimensions of the drawer are 240x120x30.The drawer has space for 8x4 inserts. They are two drawersThe inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000016350/design/2023-10-27_92ac27def74ca8.jpg"></figure>&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul><h4>Update:</h4>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(06/02/24)<ul><li>design optimizations to prevent warping</li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>27 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:&nbsp;<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000016350/design/2024-06-13_d7bc1f60e3109.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000016350/design/2024-06-13_9d592a9ba21eb8.jpg"></a></figure>