Bastelix

Daraun

<p>Hello, </p><p>&nbsp;</p><p>friend of mine is a big  gnome and viking fan …. yeah sounds funny but its true  *sigh <br><br>So i created two viking garden gnomes for plants or cakes :D <br><br>My profile is upside down, to get the better side printed - works at the best with a struc. pei sheet ! <br><br>Have fun ! </p>

Viking Garden Gnome

Pflanzen

thrutheframe

<h3><strong>NOTE:</strong></h3><ul><li>Please read the instruction guide below. </li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers. </li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul><h4> </h4><h3><strong>UPDATE 6 Aug 2023</strong></h3><p>My Bambu cube needed an update, so here it is. Embosses are now 1.4mm rather than 2mm. Kind of overkill with a 2mm overhang. The base of the cube now fits 608 bearings. This will allow the cube to spin when placed on the Bambu dish. </p><figure class="image image_resized" style="width:357.003px;"><img src="https://media.printables.com/media/prints/222285/rich_content/6344c28b-2a73-4bc5-a89c-0fce944065aa/thumbs/cover/800x640/png/bambu-cube-update-1.webp"></figure><h3><strong>INTRODUCTION</strong></h3><p>A fun project to design an XYZ calibration cube with a Bambu Lab theme. I designed this because I dislike printing benchy.</p><ul><li>Bambu Cube 30x30mm</li><li>All embossed is 1.4mm deep</li><li>This print test for overhang, dimension accuracy and fitting. </li><li>No support is needed. </li><li>The circular hole for 608 bearings is designed with a diameter of 22.2mm </li><li>(optional print) Bambu Cover is 2mm thick and fits exactly into the top opening with 0.2mm offset; to test part fitting. </li><li>(optional print) Bambu Dish is 80mm in diameter and 10mm in height; to display the Bambu Cube and check the seam finish.</li></ul><p style="text-align:center;"><a target="_blank" href="https://www.youtube.com/shorts/N0OXzKaYPGU" rel="nofollow noopener">Youtube short of the Bambu Cube</a></p><p>&nbsp;</p><p>To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like them and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. </p><h3>CAVET</h3><p>As with all my designs, it may and may not work for you. So print and install at your own discretion. </p>

Bambu Lab XYZ Calibration Cube

Kalibrieren 

Zappelbrox

<p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p>&nbsp;</p><p>Filaments Used:<br>    PLA BambuLab Basic Black Transmission Distance: 0.6<br>    PLA BambuLab Basic Red Transmission Distance: 5<br>    PLA BambuLab Basic Green Transmission Distance: 2<br>    PLA BambuLab Basic White Transmission Distance: 6</p><p>&nbsp;</p><p>Swap Instructions:<br>    Start with Black<br>    At layer #8 (0.72mm) swap to Red<br>    At layer #15 (1.28mm) swap to Green<br>    At layer #18 (1.52mm) swap to White for the rest.<br> </p>

Pflanzen

Kalibrieren

Hueforge