thurms & lansing

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;<h3>This model is design for MakerWorld light contest (3/5). Complete free version is only available on here Makerworld.</h3><h3>There are some design derivative works based on this design available on my <a target="_blank" href="https://www.patreon.com/SavageLau" rel="nofollow noopener">Patreon</a> and <a target="_blank" href="https://cults3d.com/en/3d-model/home/peashooter-lamp" rel="nofollow noopener">Cults</a></h3>Derivative work display:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_dd6ab1a1ef975.png"></figure>This design takes two days of design, revisions, and tests. So your support will make more design like this available in the future. (It could also please my boss, let her stop blame me wasting my personal time of this)&nbsp;<h3>You may also like this design:</h3>BellSprout Lamp LED Kit 001<a target="_blank" href="https://makerworld.com/en/models/164551#profileId-180702" rel="nofollow noopener">https://makerworld.com/en/models/164551#profileId-180702</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_aad847987e9ea.jpg"></figure>&nbsp;So, continue with my last Bellsprout lamp design, there were many people who mentioned it would be cool to have a Peashooter lamp. So, there you go.This design is also work around adopt the Bambu lab Lamp LED Kit 001 as light source, at the same time, I also want something new in there. So there are many new elements added in there beside the style different.&nbsp;<h3>A1mini:</h3>When initiated this design, I set it to be able to print within the build plate size of a1mini, so people who only have a1mini will also be able to enjoy it. Also, I don't want to go back and rework on some of the things to fit the size later, if someone requests it.But it givesssssss me so much trouble just because of the build plate size. There are tons things that I have to work around to make it happen. But yeah, I got it done.&nbsp;<h3>Credit:</h3>My boss said I need to credit her work here. She taught me how to draw the line on parts.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_5bdfbc10c7237.gif"></figure><h3>New Mechanical stuffs:</h3>Besides carry over ball joint design from previous work. I also have added thread, two locking mechanisms, one is located on the back on the head, where leaf attaches at, it is gradually locking structure where you can feel the friction increase while locking it. (But yeah, I have mess up the locking direction, it is left hand lock, lol)Second one is located at bottom of the head, where it attaches to the ball joints. It allows two pieces still remains two degrees of freedom even when it is fully locked in position. Still working on better tolerancing, but it is definitely interesting stuff.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_954c54ab65f8d.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_20c29c6783403.gif"></figure>&nbsp;<h2>Printing Profile:</h2>All the printing profiles are 0.28mm layer height. I have tested, in this scale (size) of model you can't really tell the differences in terms of printing quality from 0.20mm to 0.28mm. So why not just save some time.&nbsp;Two printing profiles are available up there. I colored the head on eye. So, it takes very long time to print. I have tested, if you don't might paint with your maker after hand, pick some color for that part, you will reduce printing time to half.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_9dc30fbef2a3d.png"></figure>&nbsp;<h3>Joints:</h3>I put all the joints in one plate, the setting on joints is different with other parts. In order to keep the strength and flexibility of parts at the same time, keep it at 4 walls, 15% to 20% infill, less or extract will cause strength issue.&nbsp;<h2>BOM:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_7051cda35ce34.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_6f56e1feb35d9.png"></figure><h2>Post work:</h2>Remove all the brims. You don't need video instructions for this, right?&nbsp;<h2>Assembly:</h2>Pay attentions how I put joints together, this ensure best practice to reduce the failure of joints during assembly.&nbsp;<h3>Step 1:</h3>LED goes to head hub.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_931ac8f5c6176.gif"></figure>&nbsp;<h3>Step 2:</h3>Head leaf assembly.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_9a91a481d225.gif"></figure>&nbsp;<h3>Step 3:</h3>Head to joints connection.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_fa6aa0d172568.gif"></figure>&nbsp;<h3>Step 4:</h3>Base hub. It is tight fit, perform assembly on table as shown.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_483e82a470bd9.gif"></figure>&nbsp;<h3>Step 5:</h3>Final assembly, take head joints off will make it easiler to put on with rest of the joints.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_79843a72e8375.gif"></figure>&nbsp;<h2>Okay, My favorite parts, design:</h2>Since we are doing a feature orientated design, a function part. So the main focus is make it work. The size is determine by the light source, this design is a lot bigger in size compare to last lamp, since I want to put a standard light ball in there as light source too.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_1f9dd692cbaf5.png"></figure>Also ensure it will fit the a1mini build plate size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_1f20e65e9ca2f.png"></figure>You know, when head is in such big size, you will need a stable base to keep it from falling.Beside keep more weight on the base, you can also ensure keep the center of gravity as center as possible.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_f2f0757f35a5f.png"></figure>Integrate parts.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/504802/2024-02-06_c09ae3cbd0a6.png"></figure>

Peashooter Lamp LED Kit 001

warlogh

Set of 5 different style Shelves for Honeycomb Storage wall. Shelves are 100-120mm wide and 50-60mm deep.Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little sanding will be needed on fixings if they will very hard fit as I made them to be in place strong and for my Bambu X1 printer they fit just perfectly.Enjoy&nbsp;You can Buy me a coffee if You feel good doing so :) (And very big Thank You For interest in my work) <a target="_blank" href="https://www.buymeacoffee.com/warlogh" rel="nofollow noopener">https://www.buymeacoffee.com/warlogh</a>

Set of various Shelves for HSW Honeycomb Wall

Jordan Proctor Designs

Update: I have now uploaded slightly improved versions of the planter and tray models. The tray should now have a snug fit with the planter, keeping it from sliding around and getting off-center. &nbsp;The pictured print was done in matte gray PLA, 0.2mm layer height, with the “fuzzy skin” feature enabled. Default size is 3x3x3 inches, but it could easily be scaled up or down without any issues. If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps!<a href="https://www.paypal.me/theprintedplanter" rel="nofollow">https://www.paypal.me/theprintedplanter</a>

Twisted Square Planter with Drainage Tray for Small Houseplants

Pot/Planter

Augustas

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000114541/design/2024-03-23_e3aef21a74483.png"></figure><a target="_blank" href="https://www.buymeacoffee.com/augustas" rel="nofollow noopener">https://www.buymeacoffee.com/augustas</a>&nbsp;--------------------------------------------------------------------------------------&nbsp;Hello there,&nbsp;I was intrigued and amazed by some of the beautiful Voronoi models on the internet, so I wanted to try it myself. I chose to give it a bowl shape and form since I enjoy practical things, therefore I designed and offeredgive you my Bowl - a Voronoi pattern bowl.But, let&#39;s face it, you&#39;re not going to put something little in there like sweets anytime soon. However, you may try scaling it down to match your needs.&nbsp;Print settings :&nbsp;Layer height: 0.15mm or 0.2mm<ul><li>A lower layer height will result in a smoother surface finish, but it will also take longer to print.</li><li>A higher layer height will print faster, but it may not be as smooth.</li></ul>Infill: 20% or 30%<ul><li>A higher infill percentage will make the bowl sturdier, but it will also make it heavier and more difficult to print.</li><li>A lower infill percentage will make the bowl lighter and easier to print, but it may not be as strong.</li></ul>Wall thickness: 1.2mmTop/bottom thickness: 3mmPrint speed: 20mm/s or 80mm/s<ul><li>A slower print speed will help to prevent the filament from stringing and warping.</li><li>This will help to produce a smoother surface finish and a stronger print.</li></ul>Temperature: 200°C or 210°C<ul><li>The temperature of the nozzle should be high enough to melt the filament properly, but not so high that it causes the filament to burn or warp.</li><li>The optimal temperature will depend on the specific filament you are using.</li></ul>Additional tips:<ul><li>Use a brim or raft to help the print adhere to the bed.</li><li>Supports are optional</li></ul>Supports are optional; I attempted to keep the number of overhangs and lengthy bridges to a minimum for optimal printability, but if you want to improve the look from the bottom on the little bridges and steep overhangs, you can use supports. In this instance, tree supports will be ideal.Size: 200x200x90 mm it is easily scalable if you want larger or smaller size.If you like this model, check out my other models and leave a comment. :)I am looking forward to your makes,Augustas

Elegant Voronoi Bowl

Bowls

Pulsar Designs

This compact, light, and quick-to-print watch holder makes the perfect display for your watch when it's not on your wrist. Its functional and minimalistic design makes it fit in anywhere and with any watch. Even better, this watch holder only weighs about 16g - great for an entire watch collection or as a gift!&nbsp;You can find both the original and mirrored version in the print profile or the raw model files.&nbsp;A matching Base to hold two, four, six, or eight Watch Stands can be found in my uploads or with the following link: https://makerworld.com/en/models/125267#profileId-135291&nbsp;Enjoy!

Watch Stand/Display

Watches/Time

K-Studio.ca

Bathroom / Makeup Organizer mini cabinet includes many divider options from the print profiles. The dividers can be installed in all three shelf level.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-09_9eeee2d704509.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-09_c70e4220abc318.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-09_53c7709db3f648.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-09_5ad75ca62ce5d8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-09_f516233e2b64d8.png"></figure></td></tr></tbody></table></figure><h4>Filaments</h4><ul><li>Bambu PLA Matte</li><li>Bambu PLA Basic</li><li>Bambu PETG Basic</li></ul><h4>Color Customization</h4>You can use the Bambu slicer paint tool by layer for the top hat shelf.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-07_8416caf9d3717.jpg"></figure><h4>Hardware for the drawer handles</h4>Option A<ul><li>CA Glue</li></ul>Option B<ul><li>2x M3x10mm screws</li></ul><h4>Instruction</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-07_a17cd5ae73e7e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-07_11dfaeaac8bcb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-07_2144809887abd.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-07_e40fe7b391b3e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837624/2024-04-07_335b2bb9469e08.png"></figure>

Makeup Organizer

Storage

Alexanderwrobinson

I recently upgraded and bought my second printer (Bambu Lab X1C) and not only am I finding that I want to do prints on each printer with the same filament but some of my spools don't fit the AMS system.A lot of the existing respooler tools I found online were convoluted and required many parts and their own setup space. I wanted something that was quick, simple, and didn't take up space. This tool requires a 3/8" (9.5mm) Socket adaptor drill bit to simply plug into the end of the respooler, pull the trigger, and bam! Respooled. Just make sure that you set the drill to speed 1, and torque 6. Anything higher will risk the kickback destroying the print.DO NOT RECCOMEND using on anything greater than a 1kg spool with provided settings, really beef up the perimeters and infill of the whole thing if you do want to try!&nbsp;If you like what I'm doing and want to help me keep doing it feel free to <a href="https://www.buymeacoffee.com/AlexWRobinson" rel="nofollow">Buy me a Nozzle</a> :)&nbsp;Hardware Requirements:<ul><li><a href="https://www.amazon.com/DEWALT-DW2542IR-4-Inch-8-Inch-Adaptor/dp/B001309TT4/ref=sr_1_10?crid=3RB8SV3NINBAS&keywords=3%2F8+impact+socket+bit&qid=1669504698&sprefix=3%2F8+impact+socket+%2Caps%2C264&sr=8-10" rel="nofollow">3/8" (9.5mm) Socket Adaptor Drill Bit</a></li></ul>&nbsp;Print Instructions:<ul><li>Any Layer Height</li><li>15-20% Infill <ul><li>Some strength is needed</li></ul></li><li>Add modifier around drill bit hole to make 5 perimeters<ul><li>2 Perimeters will lead to the kickback breaking the print</li></ul></li></ul>The 3mf file provided includes the required modifier!Happy Respooling!

The Respool Tool (Respooler Drill Attachment)

Spooling

QwermMakes

MOD3 VFG V1.2 by Qwerm&nbsp;A vertical foregrip with a slight forward angle inspired by BCM’s Vertical Grip Mod 3. This release includes a Picatinny, M-LOK, and Keymod version. I’ve also included STLs that allow you to print different fuzzy skin settings for different parts of the grip. The included PDF guide walks you through how to set fuzzy skin settings for the side inlay section.&nbsp;Change Log: V1.1 -Simplified the guide. V1.2 -Changed M-LOK mounting interface for better mounting. -Adjusted M-LOK and Keymod versions for easier printing.&nbsp;Orientation: Print with the mount side facing down.&nbsp;Settings Used: Material: PLA+ Extruder Temp: 60c Bed Temp: 210c Layer Height: 0.20mm Wall Line Count: 5 Infill Percentage: 50-100% Support: Yes Support Structure: Tree Support Placement: Touching Buildplate Fuzzy Skin: Enabled Fuzzy Skin Outside Only: Enabled Fuzzy Skin Thickness: 0.1mm Fuzzy Skin Density: 10.0/mm&nbsp;For the Picatinny version you will need: 1x M5 x 30mm Button Head Bolt 1x M5 Nut&nbsp;Credit to FFFTech for the Picatinny and M-LOK templates.

MOD3 VFG Pack V1.2 (Supports Multi-Texture Printing)

Gun/Reloding

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max White Transmission Distance: 5.6&nbsp;Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Grey At layer #18 (1.52mm) swap to White for the rest.

Cross and the Moon Art Hueforge

Hueforge

franceschellifederico

NOTE: Use my profile and please do not change the print profile settings if you want to get a perfect result! The layers are adaptive and the speed of the external wall is reduced to obtain a wonderful lucidity effect :)&nbsp;Embrace simplicity and contemporary elegance with this meticulously crafted lowpoly vase design. Its minimalist aesthetic seamlessly blends modern artistry with functional design. Carefully sculpted edges and clean lines define its silhouette, offering a striking visual appeal that enhances any space. Add a touch of sophistication to your décor with this unique, artful vase, perfect for showcasing your favorite blooms or standing proudly as a standalone piece. Elevate your surroundings with this fusion of simplicity and modernity.

Low Poly Vase

Vase

Double H

A lowpoly remix of the Christ the Redeemer Statue in Brazil - thanks to Jhos Fuentes for the original.

Lowpoly Christ the Redeemer

Maleko

<h2>The Nozzle Wiper</h2>I designed this nozzle wiper for my X1C. The original wiper isn&#39;t effective and when I got my A1 I saw how great the A1 wiper was so I decided to adapt an A1 wiper to my X1C. This solution cost me less than $1 and now my nozzle is always clean which reduces defects on my prints.&nbsp;I tested this print for 1 week ( &gt; 40h) of printing without a problem.The A1 wiper is available for purchase from the official Bambulab Store at an affordable price.<h4><a target="_blank" href="https://emojipedia.org/warning" rel="nofollow noopener">⚠️</a> Use a material that can handle the heat, like at least PETG.</h4><h4>🚀 <a target="_blank" href="https://makerworld.com/en/models/437463#profileId-342665" rel="nofollow noopener">New version V3 available here</a> 🥳</h4><h3>INSTALLATION:</h3><ol><li>Remove the screw holding the original wiper - Using the larger allen key.</li><li>Install the new wiper using the original screw.</li><li>Cut an A1 silicon wiper in half and install it on top of the new wiper.</li></ol><h3>BENEFITS:</h3><ul><li>No Supports</li><li>No Brims</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Clean nozzle</li></ul>

The Nozzle Wiper - X/P Series

Printer Accessories

MatejB

Tool for quick and easy removal of X1C hotend connector.Tweezers for other connectors available at <a target="_blank" href="https://makerworld.com/en/u/3536459773/collections/770294" rel="nofollow noopener">https://makerworld.com/en/u/3536459773/collections/770294</a>&nbsp;Agains standard JST tweezers, there is no chance pulling the female part connector out of PCB.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/ildR0R2RKnk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ildR0R2RKnk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Print SettingsPrint like this with tree supports, PETG material and 0.12 layer height.After the printing, postprocess with file or some knife the surface from support material.<figure class="image image_resized" style="width:49.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/655937/2024-02-29_fee9a80f79f9e.png"></figure>&nbsp;

Bambulab X1C hotend quick-tweezers

Misc

soerenharaldsson

Annoyed by always having the hangers on the door, or in the frame and that they regularly fall off when you walk past carelessly.&nbsp;A solution had to be found quickly...&nbsp;I made versions for 18, 20, 25, 30, 35, 40 and 45mm doors&nbsp;&nbsp;PS.: According to this application, I recommend printing with PETG.&nbsp;PPS.: Just added a new Version with Voronoi pattern<a target="_blank" href="https://makerworld.com/en/models/414862#profileId-316877" rel="nofollow noopener">https://makerworld.com/en/models/414862#profileId-316877</a> <a target="_blank" href="https://makerworld.com/en/models/414862#profileId-316877" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/818093/2024-04-05_46eaab15f6c3b.png"></a>&nbsp;------------------------- ❤️ Thanks for ur support ❤️&nbsp;usually make the designs for myself, I am also happy to make them available... Work doesn&#39;t have to be done twice. 🤷♂️&nbsp;If you like the files and would like to support me a little, I would be thankful 🖖🤓https://www.buymeacoffee.com/soerenharaldsson

coat hanger mount for different doors (15-45mm)

Hooks

Cinderwing3D

Hello everyone!  Today I want to present to you the first ever completely free Cinderwing3D Dragon - The Bamboo Dragon! Bambulab reached out to me asking if I wanted to make a dragon for them and seeing how I use their printers for prototyping.... it was an easy yes!As with all my designs this model is an easy print-in-place and requires no supports. All you need is a clean bed and you&#39;re off! I also have included two 3MF files for multicolor, as shown in the pictures!  Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. Please feel free to join our <a href="discord.gg/cinderwing3d" rel="nofollow">Discord</a> chat for help and discussions. Filaments used were Bambu Green PLA Basic, Bambu Red PLA Basic, and Gold Bambu Silk PLA! <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=3729583&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Feel free to use my affiliate link to grab some for yourself!</a> The Green Gradient filament <a target="_blank" href="https://amzn.to/3Htn19A" rel="nofollow noopener">can be found here!</a> The Green and Brown Gradient <a target="_blank" href="https://amzn.to/47N8EYF" rel="nofollow noopener">can be found here!</a> And the Tricolor<a target="_blank" href="https://amzn.to/3UfR3W3" rel="nofollow noopener"> is here!</a> ----- Hi, I&#39;m Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale.  The Digital files are never to be re-sold, shared, or given away!<h4>Commercial License and monthly bonus models: <a target="_blank" href="https://than.gs/u/1780858?plans=true&amp;affiliateCode=jazzyplz" rel="nofollow noopener">Thangs Memberships</a> <a target="_blank" href="https://www.myminifactory.com/users/Cinderwing3D?show=tribe" rel="nofollow noopener">Tribes</a> <a target="_blank" href="https://www.patreon.com/cinderwing3d" rel="nofollow noopener">Patreon</a></h4><h4>Please see our other public models here: Check us out on our socials! <a target="_blank" href="https://www.facebook.com/cinderwing3d" rel="nofollow noopener">Facebook</a> | <a target="_blank" href="https://twitter.com/cinderwing" rel="nofollow noopener">Twitter</a> | <a target="_blank" href="https://www.instagram.com/cinderwing3d/" rel="nofollow noopener">Instagram</a> |<a target="_blank" href="https://tiktok.com/@cinderwing3d" rel="nofollow noopener"> Tiktok</a></h4>

Bamboo Dragon Cinderwing3D X BambuLab

Animals

Ulsen0815

<h4>Zusammenfassung</h4>Es ist nicht verwunderlich, dass der Nussknacker ein Weihnachts-Lauf ist, das von Menschen in der Nähe und in der Ferne, jung und alt gesammelt wird. Folklore behauptet, dass Nussknacker an Familien als Geschenke gegeben wurden, um ihnen viel Glück zu bringen und ihre Häuser zu schützen. Der MakerBot Nutcracker wurde mit dem Klassiker entworfen, aber mit einer aktualisierten Wendung - dieser, die man machen kann!Dieser schön gestaltete Mehrteildruck eignet sich für jeden MakerBot Drucker. Teile schnappen sich zusammen und Sie können Ihrer Fantasie freien Lauf mit Farbe, aber beachten Sie, dass diese Versammlung nicht für Anfänger empfohlen wird.<h4>Anleitung</h4>&nbsp;INSTRUCTIONSDrucken Sie Stücke in diesen Farben aus oder tauschen Sie in Ihrer eigenen Palette aus. Wir empfehlen, Stücke in diesen Farbgruppen für Ihren ersten Nussknacker zu halten, um die Montage zu erleichtern.HINWEIS: Mit 30-Fill-gedruckte Stücke sollten bei 30% Füllung für Stärke gedruckt werdenTrue Red: Arms, Back-Lever30infill, Body-Bottom, Body-Top True White: Handschuhe, Haare, Schnurrbart, Augen, Beine True Blue: Iris-Clips-Rod True Black: Gürtel, Stiefel-Bottom-30-Infill, Boots-Top, Hut, Schulter-Buttons Echt Gelb: Gürtelschnalle, Bootband, Knöpfe, Hutgurte, Schulterpolster, Hutdekorationen Pfirsich: Ohr, Kopf 30infill, Jaw-30infillASSEMBLYEs ist hilfreich, eine Pinzette und einen Schläger zur Hand zu haben, um bei der Montage zu helfen. Die meisten Stücke schnappen sich ohne Kleber zusammen.Beginnen Sie mit Boots Bottom mit Blick auf Sie. Befestigen Sie Boot Band an der Spitze von Boots Bottom mit eins, das Boot Band vorzufassen. Platzen Sie Boots (oben) über Boot Band. Sichere Stiefel Top mit Beinen. Knie sollten leicht nach vorne stoßen. Befestigen Sie die Unterseite nach unten zu den Beinen. Fügen Sie (2) Knöpfe in Body Bottom ein. - Befestigen Sie den Gürtel an Body Bottom mit nub nach vorne-rechts. Bandschnalle an der Brüskierung anbringen. Attach Body Top am Gürtel. Einfügen (6) Knöpfe in Body Top. "Hinzufügen Sie Kopf an Body Top. - Befestigen Sie R Arm an R Schulterpad und L Arm an L Shoulder Pad. Einfügen (2) Schulterknöpfe in die Spitzen der Schulterpolster. Bringen Sie R Glove an R Arm und L Glove an L Arm. Einfügen (8) Knöpfe vorne und hinten von R Glove und L Glove. Befestigen Sie R Schulterpad an Body Top. Befestigen Sie L Schulterpolster an Body Top. - Anbringen Sie Jaw (gezierte Nut mit nach oben) zu Back Lever (Gle-Hinweis nach unten). Fügen Sie Kiefer in den Kopf ein, dann legen Sie den Rod durch Jaw und Head ein. - Anbringen Sie R Ear und L Ear an Kopf. Schnurrbart an Kopf. Bringen Sie Haare an Kopf an. Bringen Sie Irises in Eyes und Augen in Kopf. - Bringen Sie Hut mit Clips an Kopf an. - Einfügen von Hat-Dekorationen in den Hut. Fügen Sie den Gürtel zurück in die Rückkehr zurück. Einfügen von Hat Straps in Jaw und Head. Bringen Sie den Kopf mit dem längsten Clip an den Körper an&nbsp;

max

HSW