user_4056571745

gipson.andrew91

A backpack for arms made for the Atelidae.

Atelidae Four Arm Backpack

Dummy 13

Gianby

Credit card sized holder for nano sim, microsim, microSD and adapter

Sim and SD card Holder

jaspauls

Introducing a 3D-printable bearing design for a smaller ball bearing. This model is engineered for easy "Print in Place" use, allowing it to be printed without additional supports and ready to be used right out of the printer. The design prioritizes minimizing friction by optimizing tolerances between the 25 mm outer diameter (D) and 10 mm inner diameter (d), ensuring smooth rotation. The bearing incorporates two types of ball bodies to facilitate efficient movement. It may be necessary to spin the bearing a few times after printing to ensure that it rotates freely. To ensure proper adhesion during printing, it's essential to thoroughly clean the print bed. The ball bodies have a small contact area on the print bed. If not properly cleaned, this could lead to print failure. However, with good adhesion on the first layer, the print will progress smoothly.&nbsp;Specifications:<ul><li>Outer diameter (D): 25 mm</li><li>Inner diameter (d): 10 mm</li><li>Width (B): 7,5mm</li></ul>Note: I've uploaded a bigger bearing as well (D=50mm; d=25mm).

Bearing (print-in-place) small

Standard parts

Diamondback149

I really like adding paracord onto pretty much anything I can, but beads are expensive to buy. I had glow in the dark filament kicking around and so I designed a bead to match a part in my truck. The glowing aspect of this design is to be able to find the item if it gets dropped, and using a mini black-light flashlight makes this task simple. Besides that it can be printed in any other filament color, or can be used as a zipper pull.The internal hole is just shy of 6mm allowing for 2 strands of 550 paracord to pass through with very light resistance. Thanks for taking a look, I hope you enjoy!&nbsp;

Bomb paracord bead

Bead

EPIQ3D

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

misc

misultin

I'm looking for small simple hook, but the other I'd found don't stay in place and fall off.So I design this small simple hook, easy and fast to print. I made it very tight, so is difficult to remove and don't fall off everytime you remove some toolsI have included the fusion360 file

ikea skadis simple hook (fusion360 file included)

organisation 

Nils Kal

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Dummy 13

EDC

Standard parts

Bead

misc

organisation

Lights