user_4051004141

dmarghe2002

I have redesign the stack small from https://www.printables.com/@Fredster so it is combitable with the other version of the AMS.I've two new version of AMS, but under it's different. whit this version you can put all new version of ams

Bambu Lab AMS stack

wd40保养

Strrejda

ENG:The Milwaukee battery holder M18 is a wall-mount battery holder with a safety device against accidental release. A slight slope from the wall allows easy removal of the battery. The holder can be attached to the wall in all directions.&nbsp;CZ:Milwaukee battery holder M18 je nástěnný držák baterie s pojistkou proti náhodnému uvolnění. Mírný sklon od zdi umožnuje snadné vyjmutí baterie. Držák lze připevnit na zeď všemi směry.

Milwaukee battery holder M18 - triple holder

电池坐

Chaozzz

As I don't like to keep the straw on top of WD40, so I custom made 1 to hold the straw.it should be good for small WD40

WD40 (Small) Straw Holder

机器

stantang986

<div><h1>Summary</h1><div>I am not good at editing stl file, so I redraw it by fusion360. This distributor fits camlock, because my dust collection all using CAMLOCK system (<a href="https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc" rel="nofollow">https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc</a>).You may need 3mmx40mm support pins to contact two parts, mid body part can be added many as you like. Also 8 Hot insert nuts needed for right and left side cover.I printed mine using ABS, all parts fitness designed for ABS.</div><h1>Print Settings</h1>Printer Brand: <div>VoronDesign</div> <pre><code> Printer: <div>Voron2 300</div></code></pre> Rafts: <div>Doesn't Matter</div> <pre><code> Supports: <div>Yes</div></code></pre> Infill: <div>20</div> <pre><code> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Polymaker+ABS" target="_blank" rel="nofollow noopener"> Polymaker ABS </a></code></pre></div>

4-way distributor dust collection suit for CAMLOCK

MKAnuar_8

DESIGN: Holds two bits for added convenience CONVENIENCE: Installs quickly and easily using screw DURABILITY: Made of durable plastic for long life PERFORMANCE: For use with select Makita LXT Cordless Drills INCLUDES: Bit holder only - screw not includedFeatures: *Long service life. *Stable characteristics, high reliability. *Can be installed on either side of your Machine. *This essential accessory fits Drills, Impact Drivers, and wrenches.

Makita Bit Holder

批头

dave3ddiy

This is my designed version of the Fastcap Rail holder. This has a a design where the cam is print in place. So no extra hardware is needed to set up the lock. This should fit most track saw rails. Kreg and Bosch will need some editing to make those rails fit. You can divide the model in two or try to transform only the bottom half where the hook is.NOTE: When the print is finished the knob will be slightly fused. You can use a utility blade or a thin screw driver to insert in between and slightly cut and create space by just inserting in. Update: An additional file is added for anyone with tracks that are fitting tight. This new file has an extra 2mm of spacing added. Also it has come to my attention that if the print is printed on it side it can be easier for some with the cam to be loose. You can print with supports in this orientation. But I would do from build plate only.Update 2: A smaller Bosch version was added. I do not have a Bosch rail this was done with found specs. If you have a Bosch rail let me know the correct measurements and how this fits. ThanksUpdate 3: Added Holder for larger Bosch professional Rail FSN Measurements provided by others so not sure of its accuracy.<h3>Print Settings</h3>Printer Brand:Prusa&nbsp;Printer: I3 MK3SRafts:&nbsp;No&nbsp;Supports: YesResolution:&nbsp;.2&nbsp;Infill: 20 Filament: prusament PETG Galaxy Black Notes: Supports should only be used selectively over the hook portion of the holder. If used everywhere the print in place cam will be fused together and not turn.&nbsp;&nbsp;&nbsp;&nbsp;Category: Tool Holders & Boxes

Festool, Makita, Bosch Track Saw Rail Holder

导轨

Acheituno

This is a manual filament spool winder inspired by the bmsluite model, originally made for splicing and winding multiple spools of leftover filament onto a single roll.&nbsp;From there it has been modified to achieve a simple and effective fully manual filament spool winder, which does not need any metal parts or other parts and which will help you rewind your filaments easily.&nbsp;Its main use is to change the filament from one spool to another, for example to recharge filament in Bambu Lab spools for greater and better use of the AMS.&nbsp;It has also been redesigned and separated into the necessary parts with connectors so you can print it on your Bambu A, X or P series&nbsp;I have done test with three complete ones, all made with Bambu Pla Basic, 25% filling should be enough, If you have issues you can increase the filling of the parts that are subjet to greater stress like hand crank (recomended 65% filling) or use PETG/ABS/ASA. In addition you can also vary the printing position to give greater strength. A drop of lubricant on the gears and hand crank will help ensure smoother, longer-lasting operation without issues&nbsp;Enjoy it!!

Manual filament spool winder

绕线

CK Designs

This is a cover that is designed to snap onto the Milwaukee M18 Rocket Light. I have added a 10mm hole for use of carabiner or other types of holders so it can be attached to the handle of the light while not in use. I printed this in PLA and PETG and I would recommend printing it in PETG. They both fit perfectly fine but PETG has a little more give and would probably have a lower chance of snapping the tabs off over time.

Lens Cover For Milwaukee M18 Rocket Light

心心心

13cm 大号龙蛋龙蛋对准点不平齐的问题。 The problem that the dragon egg’s alignment points are not aligned.

龙蛋对齐垫片 Dragon egg gasket

long

OCDTOOLFREAK

Lots of time designing and testing this Battery holder. I wanted to be able lock it right in to my pack out system and go and after lots of tweaking I can say it works great. It does require A few screws but that is so it is printed in the best orientation and very few supports.You will need 4 #2 screws .5" long and 8 #10 Screws 1" longAdded extra walls so the screws to have Something to bite in to. Ill also be adding my 4 battery packout ready file soon so stay tuned.&nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you'd like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Milwaukee Battery Storage and carrier -Pack out ready 6x M18 

KoBuCRAFTS

Easy to print design, without any supports.&nbsp;Holder for tools with a max. diameter of 70mm, max. 40mm handle with&nbsp;Dimensions:<ul><li>Length: 150mm</li><li>With: inside 70mm / outside 80mm</li><li>Hight: inside 70mm / outside 80mm</li><li>Screw holes: 4mm, with countersink to 9mm</li></ul>Like this model? Please click on the purple BOOST button!&nbsp;You can allways scale the design to a bigger size.&nbsp;Only 105 grams of filament needed, very strong and smooth result!

Drill holder / Powertool holder / Cordless drill

德伟灵便改

D-Byte

Festool Cleantec adapter to Bosch GBH 2-28 hammer drill. To replace the Bosch part with an adapter what can take a Cleantec male connector. There is a original angle (105 degree) adapter and a straight adapter (handy for when you drill a lot in the ceiling). The angled adapter fits in the original box, for the straight adapter you need to cutout a piece of the box insert.

Festool Cleantec to Bosch GBH 2-28 hammer drill

博士

enricoRE

Ship sunset HueForgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmDon't scale Z heightSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Yellow for the rest.

111

wd40保养

电池坐

机器

车

批头

导轨

绕线

灯

long

mi

德伟灵便改

博士

画