bgnout

Sean0926

<a target="_blank" href="https://shop.thehueforge.com/collections/hueforge?aff=3" rel="nofollow noopener">HueForge</a> Iguana created for the <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303556665?aff=507" rel="nofollow noopener">Polymaker Green Start Pack</a> of Filaments. Only manual filament swaps required.Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mmFilaments used <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303556665?aff=507" rel="nofollow noopener">Polymaker Green Starter Pack</a>:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">Polymaker PolyTerra Charcoal PLA Black Transmission Distance: 0.3</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345809977?aff=507" rel="nofollow noopener">Polymaker PolyLite Pro PLA Green Transmission Distance: 1</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478392889?aff=507" rel="nofollow noopener">Polymaker PolyLite Lime PLA Green Transmission Distance: 3.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA White Transmission Distance: 5</a></li></ul>Swap Instructions:<ul><li>Start with <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">PolyTerra Charcoal Black</a> </li><li>At layer #6 (0.84mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345809977?aff=507" rel="nofollow noopener">PolyLite Green</a> </li><li>At layer #9 (1.2mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478392889?aff=507" rel="nofollow noopener">PolyLite Lime Green</a></li><li>At layer #12 (1.56mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">PolyLite White</a> for the rest.</li></ul>

Iguana HueForge

MISC

BeardedBayou

On the Lid, Use 25% Infill, Use Cubic or Gyroid. Use a Brim, Brim width 7, Brim Object Gap 0.18... Pause layer on layer 20 to add magnets!&nbsp;On Bottom, Use 25% Infill, Use Cubic or Gyroid, No Brim. Use Support on the top of the hole, Tree Supports work well Touching Build plate.... Pause at layer 644 to ad magnets!&nbsp;Uses 8, 8mmx3mm Magnets Total.

6.5 Inch Gecko Hide

Gecko Supplies

Zarol_zz

<h2>Summary</h2>I designed a chips style 3D print clip, the chips part could be according to different flavor you likethe design without spring &nbsp;<h2>Filament </h2>the clip part I recommend PETG as the filament to get better strength and toughnessthe chip part I recommend PLA as the filament, it will surrport you to get better surface quality in overhang area<h2>Printing Instructions:</h2>parts :You will need these parts to make a complete chips clip:<ol><li>chips part X2 (it's the same model in the raw model)</li><li>clips X1</li></ol><h2>Assembly</h2>I design a slide way on the clips, push the chips part in the slide way you can complete assembly!the tolerance won't be tight , I add some clearance will help you assemble smoothly<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/296227/2023-12-22_53805f7d15d6f.gif"></figure><ul><li>if you want to slicing by yourself, make sure the arrow point side on the print plate</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/296227/2023-12-22_7e4cf492f8214.jpg"></figure>&nbsp;If you have some problem during combine the part, maybe remove the bur on the the slide way entrance will be helpful<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/296227/2023-12-22_f0a89f5a36b1f.jpg"></figure>&nbsp;

Chips clips

KefmaDE

Englisch:This small 3D-printed car is powered by a balloon.You can print it on a single plate and make the tires black by printing the first 3 millimeters in black and the rest in your desired color.&nbsp;Insert the longer part of the wheels through the opening under the car and press the second part of the wheels firmly on the other side.&nbsp;No supports are required for 3D printing.&nbsp;You can insert the balloon over the designated opening and inflate it by blowing through the small hole where the air usually escapes. This way, you don’t have to take out the balloon every time. Deutsch:Dieses kleine, 3D-gedruckte Auto wird von einem Luftballon angetrieben.Du kannst es auf einer einzigen Platte drucken und die Reifen schwarz machen, indem du die ersten 3 Millimeter in Schwarz und den Rest in deiner Wunschfarbe druckst.&nbsp;Stecke das längere Teil der Räder durch die Öffnung unter dem Auto und drücke das zweite Teil der Räder auf der anderen Seite fest.&nbsp;Für den 3D-Druck sind keine Stützen erforderlich.&nbsp;Du kannst den Luftballon auf die dafür vorgesehene Öffnung stecken und ihn aufpusten, indem du durch das kleine Loch bläst, wo die Luft normalerweise austritt. Dadurch musst du den Luftballon nicht jedes Mal herausnehmen.

Balloon-Powered Car Toy for Kids

Toys

dakjones82

If you're a cat person then you get it! Add some character to your holiday decorations this year.

Kitty Cat Christmas Door Decoration

Christmas 

grwang41

Applicable to all sizes (ELEGOO, R3D, JAYO, POLYMAKER, ESUN...) Cardboard Spool can be used normally and stably in P1/X1 AMS&nbsp;The fixed structure of the central axis and the desiccant can be added to the central axis part. The increased weight is more suitable for rotation in P1/X1 AMS.&nbsp;Surface hollow design saves filament

MISC

Gecko Supplies

Fun

Toys

Christmas

spool