user_4031348995

SidersCustom

Moon lamp I made using a lithophane generator, where I then modeled a base that can hide the cord and support the lithophane globe with alternated wall mount version that allows the moon to be suspended in air.&nbsp;I printed the globe on the base in <a target="_blank" href="https://voxelpla.com/products/voxel-pla-pro-1-75mm-white-filament" rel="nofollow noopener">voxel labs cool white PLA +</a> (which prints beautifully with the “bambu pla tough” preset) and gives the moon a “cool” color. The hanging moon was printed in Bambu's matte white PLA and appears more “warm”. &nbsp;The base / wall hanger is printed in Bambu's matte black.&nbsp;<a target="_blank" href="https://www.amazon.com/gp/product/B07BQRFHNK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">You'll need a cord</a> along with a <a target="_blank" href="https://www.amazon.com/gp/product/B07FNSKD9N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">small LED lightbulb like this</a>, so it doesn't get too hot and fits inside the moon.&nbsp;To attach the bottom to the base you'll also need 3 m3 screws of any length between 8mm and 20mm. <a target="_blank" href="https://www.amazon.com/gp/product/B0811NDFNJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">I used some screws from this set.</a>&nbsp;The screws will cut their own threads in the base to secure the cord in place.

Moon Lithophane Lamp - 8 inch diameter

潦草小狗爱吃雪糕

This is a mold for making spinning top from PLA filament purge. The tops made with this mold are very colorful and spin well. I printed the mold with PETG at 100% infill and did not need to use supports (PC might work even better).&nbsp;What you will need:<ul><li>An unused oven</li><li>A silicone mat (it&#39;s easier to flip and roll the melted PLA into a ball on a silicone mat than on a metal baking tray)</li><li>PLA filament purge</li><li>A 3M respirator or N95 mask (the fumes from melting PLA in the oven are stronger, so please protect yourself)</li><li>Work gloves</li><li>Tongs</li><li>Pliers</li><li>A digital scale</li></ul>Process：1. Accurately weigh 6g of PLA filament purge and place it in the oven.Preheat the oven to 200-230°C and heat the filament purge for approximately 5 minutes.2. Use tongs and pliers to shape the melted PLA into a ball. Evenly folded patterns will look better.3. Place the shaped plastic into the mold and press the mold firmly.4. After approximately 3 minutes, open the mold and remove the top. If the top is difficult to remove, use pliers to take it out.「Twisting and shaking the mold after it has cooled completely can aid in part release. I recently tried using a mold release agent (spray), and it has been very effective in ensuring smooth part separation.20240512」（translate from Google Gemini）&nbsp;&nbsp;这是一个使用PLA耗材废料制作陀螺的模具，制作出的陀螺颜色比较漂亮，旋转的很好。我用PETG 100%填充来打印模具，无需添加支撑（PC可能效果会更好）。&nbsp;你需要：一个闲置的烤箱，一个硅胶垫（需要把熔化的PLA翻折并团成一团，这在金属烤盘中很难操作），PLA耗材废料，3M防毒面具或N95口罩（在烤箱中熔化PLA产生的气味更大，请做好防护），工作手套，取盘夹，钳子，电子秤。&nbsp;压模步骤：&nbsp;1，将 6g（请准确称重）PLA耗材废料放入烤箱中，200～230℃加热约5分钟（烤箱需预热）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_df4dbe446d418.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_74bd4a7599ef7.jpg">&nbsp;&nbsp;2，用取盘夹和钳子把熔化的PLA团成一团（翻折均匀的纹理会更漂亮）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_31b36cc45d107.jpg"></figure>&nbsp;&nbsp;3，把团好的塑料放入模具中，用力挤压模具。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_75a96c8b0fc52.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_06f1d6fa28797.jpg"></figure>&nbsp;&nbsp;4，大约3分钟以后打开模具取出陀螺。如果脱模困难可以用钳子把陀螺取出。<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_07f0433aa2577.jpg">&nbsp;&nbsp;「充分冷却后扭转并晃动模具将有助于脱模。我最近尝试使用脱模剂（喷雾），它很有效，可以确保顺利脱模。20240512」&nbsp;

Spinning top mold   陀螺模具

模具

Sam HellMyth

Cute miniature statue of sleeping bearCan be printed Single and Multi colorIf you have single color printer you still able to print multicolor, just need print separate figure of bear and snow pillowsIf you printed bear separately you need to use supports at the bear belly :0)&nbsp;If you like cute bears check my other more complicated and cool assembled model of bear flying on balloonhttps://makerworld.com/en/models/230355

Cute figure of sleeping bear

雕像

fznhappy

small container, water proof. you can use multi-color to get warm light. easy to assembly. best box for cotton, eye contact…etc.

container

收纳

zintill

Big fan of yugioh? I made this pot of greed planter! the uploaded profile has it sit at 9cm tall. The model has a hole in the bottom for water drainage. Please print with supports! Not going to lie, its a bit painful to remove the supports near the handle, be careful it is fragile. &nbsp;Was going to split the model into separate parts but never got around to it. &nbsp;Uploaded pics are printed out of PLA. &nbsp;Its time to d d d d ddddd duel! &nbsp;

Yugioh Pot of greed Planter

花瓶

井中月

全尺寸请使用p或x系列机器打印 使用pei板打印请确保打印板有足够附着力 防止模型倒塌

原神 腐殖之剑 全尺寸

cos模型

3Dprint-K81

Try to get four marbles of your colour in a horizontal, vertical or diagonal row on the shifting game board.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_c8883910c75b7.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_aa982670b2a0e.png"></figure>&nbsp;But watch out! To finish your turn, you must press the central button, which will make all marbles shift one position on game board.&nbsp;Stay focused as all marbles change position on every turn!&nbsp;Moreover, you can also disrupt your opponent&#39;s strategy by moving one of their marbles on your turn.&nbsp;Insert a spring (you can take it from a normal writing pen, see photo) or if you want you can buy one on Amazon (LINK):<figure class="image image_resized" style="width:42.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_16527edd8043a.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:42.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_2abf482645e0d.jpg"></figure>&nbsp;<a target="_blank" href="https://www.amazon.it/dp/B0C77WZC9P?starsLeft=1&amp;ref_=cm_sw_r_cso_wa_apan_dp_62G55VTSMGZ1SEEHC0KR" rel="nofollow noopener">QUARKZMAN Compressione Molla, 5pz 304 Acciaio Inossidabile, 6mm OD, 0.6mm Filo Dimensione, 15mm Libero Lunghezza, Argento Tono : Amazon.it: Commercio, Industria e Scienza</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_42f22077852e2.png"></figure>Have fun and good luck!!!&nbsp;Enjoy print and I look forward to your rating and feedback…thanks!

Logic connect 4

玩具

Murphyte

这是我目前为止做的最复杂的斗拱，拼接起来有一定难度需要一些技巧和耐心，可能需要锉刀的帮助，推荐使用pla耗材打印拼装动画👇<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1qD42177iM/?share_source=copy_web&vd_source=cb4693ae1b7ed829bc12841b8c217e9f"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1qD42177iM&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1qD42177iM&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

佛光寺转角斗拱拼接摆件（大）Splicing toys 

榫卯结构

Enjoy the art and building up the pyramid puzzle. This puzzle has about 10 000 times less pieces than that of the real pyramids.Its estimated that one pyramid was built with 2.3million stone blocks each weigh an average of 2.5 to 15tons.&nbsp;Note! The pyramind base size for this puzzle is bigger then the bambulab printbed so scale it down so the pyramid base fits your printbed and scale down the rest of the files with the same scale factor as the pyramid base.

Pyramid Puzzle 238pcs

3D拼图

Josh-3D

A set of Marble Maze boxes I made! An easy, medium, and hard.&nbsp;On the top of each box is the maze for each layer you must progress through. The easy and medium aren't too hard, but once you get to hard! Haha. You'll have to listen carefully as you blindly navigate a marble through a treacherous path full of twisty turns and traps! Can you make it to the end?!&nbsp;Should be able to accommodate a metal ball or marble up to 15mm. I use the metal balls from my Gravitrax set, along with some glass marbles I had around. Each size consist of several layers that are numbered for easy assembly. There's also a clip for each size, to keep everything secure while you navigate the maze!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buy Me a Coffee</a>

Marble Maze Box

Vissidus

Disclaimer: the <a target="_blank" href="https://makerworld.com/en/u/4065967614" rel="nofollow noopener">Author</a> assumes no responsibility or liability for any misuse and damage caused by the contents of this publication. The model and individual parts contained in this publication are not intended to be used to perpetrate any illegal activity. Under no circumstances shall the <a target="_blank" href="https://makerworld.com/en/u/4065967614" rel="nofollow noopener">Author</a> of this model and publication be liable for any alterations made to the contents of this publication by any party aimed to construct a firearm. The tool shown in this video is a 3D printed, non-functional toy pistol with no ability to propel any projectiles in it's initial configuration by default, by design. About: The PP9 is a toy handgun mockup, consisting a total of 30 parts (assembly required, not including springs). Everything you expect from a pistol is completely functional: chambering, ejection, trigger pull, slide stop on ammo runout, etc.. There is no striker and trigger lever intended in this design, thus the trigger pull is for show only. Note: PP9 stands for Printed Pistol 9 millimetre The magazine holds up to 13-15 rounds (9mm nominal) with an appropriate steel spring (or up to 4 rounds with the included printed spring). Slide racking, extractor, magazine lever and trigger pull require appropriate springs (not included in the assembly). Note: printed dimensions may differ, therefore some sanding may be required to achieve proper tolerance. Note: some parts required for full functionality (recoil spring, magazine spring, magazine catch spring, extractor spring) are not included in the assembly. Also, If you found this model to your liking and wish to support the author you can donate <a target="_blank" href="https://paypal.me/vissidus" rel="nofollow noopener">here</a> Accessories: This model features a short-barreled rifle (SBR) conversion kit, with a few of it's own accesories, such as a semi-adjustable stock, a vertical grip, non-flip iron sights and is capable of carrying any other accessory that can be attached to a standard picatinny rail. Note: the kit is currently undergoing testing (and as is, a semi-final prototype) To download the kit follow the link: <a target="_blank" href="https://makerworld.com/en/models/81074#profileId-86227" rel="nofollow noopener">SP PP9 - SBR Conversion Kit</a> – Recommendations: For the most appealing receiver appearance a carbon fibre/matte filament is recommended: PLA-CF/PETG-CF. Pins and levers are best made of carbon steel. For the slide/magazine a matte/metal finish filament is recommended (ex.: Bambu Lab PLA Metal, Bambu Lap Charcoal Matte PLA). Note: PLA is sufficient enough to withstand wear and tear. For extreme durability, printing critical parts (i.e. slide locking block, slide stop lever, etc.) with PC is highly recommended. Machined stainless steel (304L, 316L)/carbon steel (1040, 1045) alternatives are superb. -- Receiver Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_5a2c5818fe086.png"> 1. Insert the ‘Slide Stop Lever’ (2) into the slot, aligned with a thru hole on the 'Control Unit Housing' (3), and push the ‘Slide Stop Lever Pin’ (1) until flush with the housing, locking the lever in place. 2. Insert the ‘Trigger Pin’ (6) into the 'Trigger' (13) until the pin protrudes (approximately) symmetrically from the trigger on both sides 3. Attach the trigger spring (not depicted in the drawing) to the trigger, and insert it into the housing unit until the trigger pin is confronted with two legs on each side 4. Align the housing unit with the receiver and push it into the receiver, aligning the rear, the front and the trigger with their respective cutouts. 5. Insert the 'Rear Mounting Rails' (5) into the housing unit as shown until fully seated 6. Insert the ‘Ejector’ (4) into the housing unit on top of the rear mounting reals, as shown, until fully seated 7. Lock the rear side of the housing unit in place by inserting the ‘Rear Mounting Pin’ through the receiver 8. Insert the ‘Magazine Catch Lever’ into the receiver, aligning the spring cutout on the lever with the hole inside the magazine well 9. Insert a magazine catch spring (1.6-1.8mm Music Wire, 20mm Length/Glock magazine catch spring, cut to 20mm length) into the hole and push it into the sot on the magazine catch lever 10. Insert the ‘Front Mounting Rails’ (12) into the cutout at the front of the receiver, locking it in place by inserting two ‘Front Mounting Pin’s from each side of the receiver, until flush with the frame 11. Insert the ‘Slide Locking Block’ (14) into the control unit housing slightly behind the front mountil rails, until flush with the top surface of the receiver 12. Push the ‘Slide Locking Lever’ (10) until the flat section of the lever is coincident with the right sight of the receiver. Do not push it all the way through. Note: The extractor spring is easily obtained from a lighter (the longer spring) with no length adjustments 13. Insert the magazine catch lever spring into the slot inside the receiver between two curves surfaces such that it latches onto a cutout in the magazine catch lever Note: An alternative assembly is described down below&nbsp;Alternative Magazine Catch Lever Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-25_829bee564f378.png"> 1. Insert the ‘Magazine Catch Lever’ (2) into the receiver such that the lever is in it's default position (i.e. left side is flush with the grip) 2. Slide the ‘Catch Lever Spring Carrier’ (1) from the top of the receiver into the slot and push thru until flush with the catch lever 3. Slide the ‘Catch Lever Spring’ (3) into the catch lever, aligning it with the square guide extrusion 4. Compress the spring until it is properly seated on the guide extrusion on the carrier Note: Slight preload is applied when the spring is fully and properly seated. See “Spring Specifications” for spring dimensions. The spring is easily obtained from a lighter (fork spring (if with a spark wheel) or igniter spring (if with a push-button igniter)) Recoil Group Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_afe3302aa44a1.png"> 1. Slide the ‘Recoil Spring Spacer’ (2) down the ‘Recoil Guide Rod’ (1) all the way down 2. Slide the ‘Recoil Spring’ (4) all the way down, until flush with the spring spacer 3. Compress the spring slightly and attach both ‘Recoil Spring Clamps’ from boths sides of the guide rod until the ends are coincident Note: The recoil spring is to be bought within the listed specifications or tested at the spot with a fitting off-the-self spring Slide Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_cc860e019a99a.png"> 1. Insert a spring into the rear circular slot in the slide and push the ‘Slide End Cap' (6) up into the slide until fully seated. Note: The slide end cap is not intendet to be disassembled. The spring should be stiff enough to apply sufficient amount of pressure to hold the cap in place. 2. Insert the ‘Sights Contrasts’ (5) into the 'Front Sights' (1) and ‘Rear Sights’ (4) until flush with the surface. Note: It is highly recommended to print the contrast inserts with glow in the dark or stark white filament 3. Insert the extractor spring (not depicted in the drawing) into the appropriate slot on the left side of the slide. 4. Insert the ‘Extractor’ (3) into the slot and lock it in place with the ‘Extractor Pin’ (2) by inserting it through the upper thru hole on the left side of the lost, until the pin is flush with the hole. 5. Tilt the barrel (approximately) 30 degrees, aligning the sides parallel to the slide sides and push it through until you are able to tilt it back flush with the slide. 6. Insert the ‘Recoil Group Assembly’ (8) end cap (solid front end) into the lower hole and push the guide rod thru until the rod can be aligned with a slot in the barrel, then release. Note: The extractor spring is easily obtained from a lighter (the smaller spring) with minial length adjustments Clip/Magazine Assembly Steps:<img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_1f3e2b6765c74.png"> 1. Slide the ‘Follower’ (3) into the magazine (1) from the bottom 2. Insert the included spring (5, not depicted in the drawing) or an appropriate magazine spring 3. Insert 'Magazine Bottom Plate Retainer' (4) and compress the spring by pressing it down into the well 4. Slide the ‘Magazine Bottom Plate’ (2) onto the magazine until flush on all sides and retainer plate is engaged. The spring will apply pressure to hold the plate in place. Note: The recoil spring is to be bought within the listed specifications or tested at the spot with a fitting off-the-self spring Complete Assembly: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_b5c07a2c44db2.png"> 1. Place the slide up on the frame top surface aligned with the front mounting rails, with the slide locking block flush with the frame pull the slide to the rear until it is fully seated in the receiver. 2. Push the slide locking lever forward until it is flush with the receiver and rotate clockwise until it is parallel with the cutout. 3. Insert the magazine into the magazine well on the receiver and push up until the magazine catch lever engages the magazine and locks it in place.

灯

模具

雕像

收纳

花瓶

cos模型

玩具

榫卯结构

3D拼图

1

1