Wanted to adapt the Vari Desk style desk hooks for different size desks. My favorite has been the smallest ones designed to fit a desktop built from 3/4" plywood. Besides making great under desk hooks, you can also turn them upside down and use them as convenient bookends.

This Mini FRC REEFSCAPE Cage has been oriented and sliced to stand up to a max weight Mini FRC robot attempting an end game robot hang. By spreading the force across many layer lines, the vertical elements are much stronger. Additional strength can be achieved with higher infill percentages if desired. Test prints are in red PLA and Blue PETG HF. https://www.terrorbytes.org/minifrc

We used zip-ties to connect our robot and battery SB50 connectors with some success. But some students didn't realize how tight the zip-tie needed to be, so we still had the robot reset on the field. There are multipart clips, and snap on clips, but these can be lost, and the students had to remember to apply them. This brightly colored clip stays attached to the robot, so it is always there when the battery is connected. And you can see from 20 feet if the clip has bee properly applied!

These joints, and the cut list below, will build one reef arm. Two reef arms are needed for a single face of the reef, with 12 arms needed for a full reef. Cut List for 1.25" PVC Pipe (Schedule 40 for the 1.66" OD) for one reef arm (1) 6.875" length of 1.25" schedule 40 PVC (1) 8" length of 1.25" schedule 40 PVC (2) 10.5" lengths of 1.25" schedule 40 PVC (1) 12.25" length of 1.25" schedule 40 PVC (1) 13.875" length of 1.25" schedule 40 PVC (1) 23.125" length of 1.25" schedule 40 PVC Shane