user_3990643946

Zappelbrox

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8&nbsp;Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Beige for the rest.

Hueforge - The Boys Poster

poster - secret compartment

DjangoCashflow

Elevate your workspace with the "Stark Tower Pen Holder," a meticulously designed accessory that embodies the innovation of Tony Stark's iconic skyscraper. Perfect for fans of the Avengers and enthusiasts of distinctive design, this model combines functionality with the thrill of creation.  Features:<ul><li>Iconic Design: Modeled after the Stark Tower, this pen holder captures the essence of its modern, high-tech architecture in every line and angle.</li><li>Functional Art: More than just a model, it organizes your pens, pencils, and tools, turning your desk into a command center befitting a hero.</li><li>Space Efficiency: Though it commands attention, the holder is designed to fit neatly on any desk, conserving space while maximizing utility.</li><li>No Glue Required: The innovative pin system eliminates the need for adhesives, making the assembly process clean and straightforward.</li><li>Engaging DIY Experience: Assemble your own Stark Tower with ease, enjoying the satisfaction of bringing a piece of the Avengers' world to life.</li></ul>Own the Stark Tower Pen Holder and transform your desk into a landmark of productivity and inspiration. Assembly Guide: 1. Step: Insert the pins into one half of the tower. <img src="https://makerworld.bblmw.com/makerworld/draft/614484/2024-03-01_0d7952ffc9863.jpeg">2. Step: Push the other half of the tower onto the pins from the opposite side.3. Step: Attach the Avengers logo to the side of the tower, aligning it with the pins.

Marvel Avengers Stark Tower Pen Holder

office - bedroom

Holoprops

Hello everyone!I&#39;m thrilled to introduce my latest creation: the PS5 Controller Pillow! (It might work for the PS4 controller, but I don&#39;t have one to try it out - Let me know in the comment if it works)The journey to create this Controller Pillow has been an exciting adventure. I dived into Blender simulations to experiment and refine the design, ensuring it was both innovative and functional. The final print exceeded my expectations, and I&#39;m incredibly proud to share it with you.One of the key features of this model is its user-friendly design for 3D printing. I&#39;ve made sure that, as with all my designs, you won&#39;t need any supports to print it. This not only makes the printing process smoother but also ensures a clean and aesthetically pleasing result. (Don&#39;t forget to put the seam behind)For those looking to conserve PLA, the PS5 Controller Pillow can be printed using a Lightning Infill at 40%. However, for added durability, I recommend using a Support Cubic or Adaptive Cubic Infill at 15%. Although it results in a longer print time, the solidity and quality of the final product are well worth the wait.I can&#39;t wait for you to try printing the model and see how it enhances your gaming setup. This model is a testament to the potential of 3D printing and creative design, and I&#39;m eager to hear your thoughts and see your prints.This is a FREE model, but only my supporters are legally allowed to sell prints based on my designs.&nbsp;Happy printing!

Playstation 5 Controller Pillow

home - alexa - pet toy

Pedro.Alc

Hello there! I create this model of can dispenser because i couldn&#39;t find any with European can measurements. I have printed it with 1 mm skirt, 5mm raft and in the position it is in in the 3mf files.Attention! the assembly is quite rigid, be careful not to break it when handling. If you like my design, please like it and enjoy printing!  &nbsp;

Euro can dispenser

kitchen - magnet

Boss Tech Print Innovations

L shaped bracket for mounting items on the wall. Has 2 mounting screws to secure to the wall our your mounting choice. Easily can be mounted to the wall to store your items and remove clutter. I use these mounts to hold my Traxxas TQi remote controllers as shown in the pictures but can be used for your use case. &nbsp;

L Hook Wall Mount

phone - hook

Sevro

OverviewModel of Bender from Futurama with flexible arms and legs. It can swing around, stand and sit. You can use it for keychain, for play or he can just sit on monitor and stare at you with desaprobate.<figure class="media"><div data-oembed-url="https://youtube.com/shorts/KBhJNHVr9hM?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=KBhJNHVr9hM"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/KBhJNHVr9hM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;InstructionAfter print, carefully take it from table. First of all snap out the arms, legs and antenna and after the rest of body. Before play you have to move each joint so it can move easy. If you want stand position squueze joint of legs so they can't move. If you want sitting position first joint must be at 90 degree. You have to use some force to make it.&nbsp;&nbsp;Have Fun

Flexi Bender

keychains - vehicle

Mr Potato

Batman BIC Sleeve&nbsp;Hope you guys like my uploads! Please Like / Download / Boost to support me 🙏

Batman BIC Sleeve

sleeve - lighter

Canadian Gamer

PUZZLE - Millennium Falcon&nbsp;Note: The blue is a splash of colour for the puzzle, feel free to change it to what ever colour you&#39;d like. Please share you colour variations for everyone else as well! I&#39;ve included a preview of what green or red would look like for you.&nbsp;The Puzzle Lid for this puzzle can be found here: <a target="_blank" href="https://makerworld.com/en/models/465486#profileId-374320" rel="nofollow noopener">https://makerworld.com/en/models/465486#profileId-374320</a>&nbsp;The Puzzle Box bottom can be found here:<a target="_blank" href="https://makerworld.com/en/models/446736#profileId-353234" rel="nofollow noopener">https://makerworld.com/en/models/446736#profileId-353234</a>&nbsp;And other puzzle files I have created can be found here: <a target="_blank" href="https://makerworld.com/@CanadianGamer/collections/988102" rel="nofollow noopener">https://makerworld.com/@CanadianGamer/collections/988102</a>&nbsp;-----------------------------------&nbsp;If you&#39;re looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: <a target="_blank" href="https://www.patreon.com/CanadianGamer3DPrintsEDM" rel="nofollow noopener">https://www.patreon.com/CanadianGamer3DPrintsEDM</a>&nbsp;-----------------------------------&nbsp;***IMPORTANT***&nbsp;In my print profile the files are set up to make the puzzle. If you load my print profile, be careful about adjusting the locations or you may change the puzzle cut. If you download the files, you will need both the STL and the Puzzle Cutter, and you will need to cut the puzzle yourself.&nbsp;In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!&nbsp;If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position&nbsp;Please post a picture of your printed copy! I&#39;d love to see it!&nbsp;— Printing Instructions---&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Generic Black Transmission Distance: 0.2 PLA BambuLab Basic Marine Blue Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue At layer #18 (1.52mm) swap to Silver At layer #23 (1.92mm) swap to Jade White for the rest.

PUZZLE - Millennium Falcon 

puzzle - game

dfreshkremer

PLEASE READ ENTIRE DESCRIPTION BEFORE PRINTING (there&#39;s a short assembly/instructional video at the end)&nbsp;WARNING!!!: Let&#39;s get the most important thing out of the way first. The Print Profile provided requires an AMS for the One-Piece Lid ONLY. The One-Piece Lid is the only part that requires supports. I printed everything in PETG, and used PLA as a support interface for the lid. You CAN print this lid without the PLA interface, but if you do, you&#39;ll need to download the files and print using your own support settings. If you try to use the Print Profile (for the one-piece lid), and do not use the PETG/PLA combo, the supports will be impossible to get off.&nbsp;The Sandy Safe is meant to be buried in the sand, keeping the lid uncovered so you can open/close it. Once buried, you can hide the Sandy Safe under your towel, and store your valuables in it. It is roughly 10&#34; tall and can easily hold 2-3 phones plus a wallet, keys, and more. You can print an optional TPU gasket to attach to the main body for added water/sand protection.  This is not included in the Print profile, but can be downloaded as an STL&nbsp;&nbsp;If you&#39;d like Selling-Rights, or a merchant license agreement, or just want to “buy me a coffee,” please message me for details!&nbsp;There are two Lid Options<ol><li>Two-Piece Lid: This lid prints in two pieces, and requires glue and assembly. No supports needed.</li><li>One-Piece Lid: This prints as one piece, and requires supports. It&#39;s a little deeper and has a “carrying handle” built in.</li></ol>&nbsp;Pics of the Two-Piece Lid…<figure class="image image_resized" style="width: 53.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_ef86300f899dc8.jpg"></figure><figure class="image image_resized" style="width: 52.93%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_339a4d9666a038.jpg"></figure>&nbsp;Pics of the One-Piece Lid…<figure class="image image_resized" style="width: 52.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_ee1ea804fd7458.jpg"></figure><figure class="image image_resized" style="width: 52.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_c7a9311da35b68.jpg"></figure>&nbsp;The square hole in the lid handle is for an optional flag you can print. If you&#39;d rather not hide the Sandy Safe under your towel, you can burry it and use the flag as a marker…<figure class="image image_resized" style="width: 52.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_a7a503c59c1788.jpg"></figure>&nbsp;Here is a short assembly instruction video. If you have any questions regarding the model or the print settings, please message me or leave a comment. If you do print it, make sure to share some pics of it when finished, and give me some feedback! Thanks!&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=XtSNDPNWEdI"></oembed></figure>&nbsp;<a target="_blank" href="https://www.youtube.com/watch?v=XtSNDPNWEdI" rel="nofollow noopener">Sandy Safe Assembly Instructions (youtube.com)</a>&nbsp;&nbsp;&nbsp;&nbsp;

The Sandy Safe (Beach Vault)

gadget - tool

abactor81

Decorative Wall Shelf.&nbsp;If you like this work, you can support me with a boost! Thanks.&nbsp;You can resize it to your liking in the slicer.

Decorative Wall Shelf

shelf - boxes

潦草小狗爱吃雪糕

This is a mold for making spinning top from PLA filament purge. The tops made with this mold are very colorful and spin well. I printed the mold with PETG at 100% infill and did not need to use supports (PC might work even better).&nbsp;What you will need:<ul><li>An unused oven</li><li>A silicone mat (it&#39;s easier to flip and roll the melted PLA into a ball on a silicone mat than on a metal baking tray)</li><li>PLA filament purge</li><li>A 3M respirator or N95 mask (the fumes from melting PLA in the oven are stronger, so please protect yourself)</li><li>Work gloves</li><li>Tongs</li><li>Pliers</li><li>A digital scale</li></ul>Process：1. Accurately weigh 6g of PLA filament purge and place it in the oven.Preheat the oven to 200-230°C and heat the filament purge for approximately 5 minutes.2. Use tongs and pliers to shape the melted PLA into a ball. Evenly folded patterns will look better.3. Place the shaped plastic into the mold and press the mold firmly.4. After approximately 3 minutes, open the mold and remove the top. If the top is difficult to remove, use pliers to take it out.「Twisting and shaking the mold after it has cooled completely can aid in part release. I recently tried using a mold release agent (spray), and it has been very effective in ensuring smooth part separation.20240512」（translate from Google Gemini）&nbsp;&nbsp;这是一个使用PLA耗材废料制作陀螺的模具，制作出的陀螺颜色比较漂亮，旋转的很好。我用PETG 100%填充来打印模具，无需添加支撑（PC可能效果会更好）。&nbsp;你需要：一个闲置的烤箱，一个硅胶垫（需要把熔化的PLA翻折并团成一团，这在金属烤盘中很难操作），PLA耗材废料，3M防毒面具或N95口罩（在烤箱中熔化PLA产生的气味更大，请做好防护），工作手套，取盘夹，钳子，电子秤。&nbsp;压模步骤：&nbsp;1，将 6g（请准确称重）PLA耗材废料放入烤箱中，200～230℃加热约5分钟（烤箱需预热）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_df4dbe446d418.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_74bd4a7599ef7.jpg">&nbsp;&nbsp;2，用取盘夹和钳子把熔化的PLA团成一团（翻折均匀的纹理会更漂亮）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_31b36cc45d107.jpg"></figure>&nbsp;&nbsp;3，把团好的塑料放入模具中，用力挤压模具。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_75a96c8b0fc52.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_06f1d6fa28797.jpg"></figure>&nbsp;&nbsp;4，大约3分钟以后打开模具取出陀螺。如果脱模困难可以用钳子把陀螺取出。<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_07f0433aa2577.jpg">&nbsp;&nbsp;「充分冷却后扭转并晃动模具将有助于脱模。我最近尝试使用脱模剂（喷雾），它很有效，可以确保顺利脱模。20240512」&nbsp;

Spinning top mold   陀螺模具

mold

3D Senju

This is a L.E.G.O.-Like minifigure lightsaber lamp. It is made 10:1 scale except for the light diffuser which is made to fit within the 256mm print height.This lamp uses the same type of led strip like <a target="_blank" href="https://eu.store.bambulab.com/en-dk/products/ws2812b-rgb-led-strip-light" rel="nofollow noopener">Bambu Lab WS2812B RGB LED Strip Light</a> which is 60 LEDs/M. I have wrapped so the light rod is completely covered in the led strip. With this I have used 102 cm of the led strip.I have tested many variations of size, thickness, diameter and shapes to find one that isn’t too thick but still fades the light. The outer diffuser is made of 3 walls.&nbsp;[It can be recommended to use a higher heat resistant material like PET-G for the Light Rod and Diffuser. I have not had problems with bending but have had a user comment about a bed in his form the heat of his 12V LED strip. If you have PET-G for those parts that will be recommended]&nbsp;Assembly instructions:&nbsp;Step 1Pull the LED-strip through the hole in the light rod, making sure it is rotated the same way as shown in the pictures. Then wrap the LED-strip around the rod as closely as possible, while making sure the adhesive makes good contact. At the end cut the LED-strip where the cobber part is. Finnish off by wrapping a piece of clear tape around the end to help the adhesive not come off.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/523095/2024-02-10_24af65e78a7e1.png"></figure>&nbsp;Step 2Follow the video below by assembling it in the order shown.<figure class="image image_resized" style="width:86.42%;"><img src="https://lh7-us.googleusercontent.com/F8SzaGgSsmr9wRyvrNEC2MxCqsKYJIMkMUjDp11hQIKpV4kCMplV2R8bKpjMhLmrdelXepauUSviVXAbhjkoaMsbkWQR31UNkekoIC20arA8wtfcK85kKPFg-LUC_eNMx07WqffyWeFrWa_SopeMQI8"></figure>Cross section of the assembled lamp:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/523095/2024-02-07_3606fdb4db7e.png"></figure>For those not using my print profile I recommend printing the inner Light Rod lying down as shown in the picture below.<img src="https://lh7-us.googleusercontent.com/DMwQ_q1PUIvkrmzFHOCHGRd4CCXZMrilt_B-T7iJwPhPszTPRwax1zx4TT57Z3lnOb3MWdWfaftQDhFke-W63rM7vADBhtFaTx75kgLDQJh9odtu_SoJXRq3TKthwDthzxq4uNvZ4PVwhjQ1pu1h7oY">This will require more support and make the rod less “round”. But what this has done for me was make the rod stronger and print better. When printing it standing up I found that it wobbled somewhat because of the flexibility in my PLA and therefore made it not completely straight. If you have PET-G or a higher heat resistant material i would recommend to use it for this part and the defuser.&nbsp;If you find the light not to be defused enough I can recommend adding some foam packing material to the inside to defuse it more. I have not used it but it would help if you run into that problem.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/523095/2024-02-11_0d0fc1b3549c.png"></figure>Enjoy :)

Giant LEGOs-Like Lightsaber Lamp (10:1 scale)

lamp - light

Arganoff

Borderlands is coming to cinema... Here is the mask of Psyco

Borderlands - Psycho mask

cosplay mask

Williams Industries

If printing as a sign, it can be used with my desk buddy stand <a target="_blank" href="https://makerworld.com/en/models/80177#profileId-178576" rel="nofollow noopener">HERE</a> Or, you can use <a target="_blank" href="https://amzn.to/49nkrP3" rel="nofollow noopener">THIS</a> to adhere to your walls. (affiliate link)&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474151/design/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;

3D Print Sign

business sign

dmgutie84

Bird feeder inspired by the iconic Stahl House.&nbsp;Base has screw holes that likely fit many bird feeders - I used this one: <a target="_blank" href="https://www.amazon.com/Bird-Feeder-Pole-Adjustable-Heavy-Duty/dp/B0BN659PTQ?th=1" rel="nofollow noopener">https://www.amazon.com/Bird-Feeder-Pole-Adjustable-Heavy-Duty/dp/B0BN659PTQ?th=1</a>&nbsp;The suet holders and the acrylic sheets for the seed holderwere taken from this birdfeeder: <a target="_blank" href="https://www.acehardware.com/departments/outdoor-living/bird-and-wildlife-supplies/bird-feeders/8231797" rel="nofollow noopener">https://www.acehardware.com/departments/outdoor-living/bird-and-wildlife-supplies/bird-feeders/8231797</a>&nbsp;The pool opening is 88mm x 122mm - I used a 4oz OXO glass container: <a target="_blank" href="https://www.oxo.com/4-oz-snap-glass-rectangle-container.html" rel="nofollow noopener">https://www.oxo.com/4-oz-snap-glass-rectangle-container.html</a>&nbsp;

Midcentury Bird Feeder

bird feeder

jdicerchio

This is a “Big Brick&#34; of Han Solo in carbonite. I remixed from <a target="_blank" href="https://www.thingiverse.com/thing:2040644" rel="nofollow noopener">https://www.thingiverse.com/thing:2040644</a> and added handles that fit into the hands on BigBricks figures. Check out all of his models on Thangs!

LARGE Han Solo in Carbonite - Big Brick

exclusive lego

TheDYZ

这是针对水弹枪优化的可支持3d打印的上下模型机匣，建议打印材料为PETG 或其他高级碳纤维材料，模型由主体的上下机匣以及11个附件组成。机匣外壳支持常规二号波箱，目前已经测试LDX数据波箱（撸蛋堂1.0及2.0波箱、QS波箱、SP波箱）、精击SLR波箱以及锦明9波箱。&nbsp;最近沉迷Wargame和SpeedQB，接连搞坏了很多支发射器，苦于钱包干瘪，所以痛定思痛肝了几周搞了这么个东西，让大家可以低成本获取或自制好用的下场风机匣。 眼尖的兄弟们应该看到了，模型做了些脱敏设计和简化设计（取消了防尘盖，排障杆，空挂），一方面尽量减少敏感特征，一方面简化了和主要功能无关的大部分配件。 机匣由GU_Upper、GU_Lower两个主体和11个小件组成，五金件需要两颗1.2*5mm的自攻纹螺丝（后销钉一颗快慢机一颗）和一颗0.7*8mm*15mm的弹簧（弹夹解脱杆）。当然通用世面上的ar金件，如图就是用金件的版本。 目前机匣适配ldx、ifp、rock等相同数据的波箱，也适配过精击slr、锦明9的波箱。弹匣适配精击、锦明（稍松）和撸蛋堂（略紧）。为保证z、y轴强度，两个件均需要45度打印，打印文件已经增加倾斜支撑底板，打印完成后需要自行剪下底板，准备一把水口钳就OK。 项目目前在MakerWorld上开源，需要的请自取，欢迎点赞收藏赞赏，谢谢大家&nbsp;*项目还在进行中，后续部分内容还会存在更新

Gel Blaster/Airsoft Printable AR（M4） Receiver

real air soft 

Josh-3D

A little tray for your dabs and a tool, to keep handy next to your rig! Included is a single color version and a multi-color version! Enjoy!

Tool holder/tray for dabs

weed 

SabreDesign

Modern Headphone stand to hold and display your headphone in a stylish and modern way.&nbsp;Easy print that fits on X1, P1 and A1 bed. 250 mm tall, 80 mm wide and depth of 70mm.&nbsp;If you want to support future models you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836517/2023-12-27_4dd127cfa82f5.png"><img src="https://makerworld.bblmw.com/makerworld/draft/836517/2023-12-30_2b9c4c54fc7a9.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836517/2023-12-27_2951845da928b.png">

Modern Headphone Holder 

headphone jack

TeleTunes

<figure class="media"><oembed url="https://www.youtube.com/embed/JtJkeWq4clk?feature=share"></oembed></figure><h3>See it in action: <a target="_blank" href="https://youtube.com/shorts/JtJkeWq4clk?feature=share" rel="nofollow noopener">https://youtube.com/shorts/JtJkeWq4clk?feature=share</a></h3><h3> Curved Flute</h3>This curved wind instrument is not only sounds great - but it&#39;s fun to play! Its unique twisted shape also makes it compact and durable. It&#39;s printed flat on the bed (holes down) and prints without any support. This particular model is an F# Major flute. I offer smaller and larger sizes, as well as a drone version, which you can find in <a target="_blank" href="https://www.etsy.com/shop/teletunes/?section_id=48644835" rel="nofollow noopener">my shop</a>.<h3>Playing Experience</h3>This instrument plays similarly to a Native American flute or a penny whistle. The fingering is straightforward—you open the holes one by one from the end of the flute upwards to play the scale. Due to the twisted bore, the top three holes are inverted. Personally, I greatly enjoy the unique and compact design of this flute and find it a joy to play.<h3>Printing Tips</h3>3D printing wind instruments can be tricky, and results may vary. Small imperfections or dimensional inaccuracies can significantly affect the final outcome. Even with the same machine, settings, and filament, multiple prints can yield different results.<h4>3D Printing Settings</h4><ul><li>Finger holes on the build plate</li><li>Bambu Labs&#39; standard 0.2mm profile</li></ul>I recommend using only dry and calibrated filaments and printing on a well-leveled bed. The flute prints flat on the bed (finger holes facing the bed) and does not require any supports. While I always print with a 0.2mm layer height, feel free to experiment with smaller layer heights. Ironing all top surfaces can help improve sound quality but may also cause imperfections in the wind channel, affecting the flute&#39;s sound and tuning.<h3>Finishing Touches</h3>Sanding down the wind channel (the part where your breath travels to the splitting edge) will give the flute a clearer sound and easier overblows, but it can also affect tuning. The sound hole and wind channel are crucial for the sound, so ensure they are free from printing imperfections and debris.&nbsp;For more details, visit <a target="_blank" href="https://www.etsy.com/shop/teletunes/?section_id=48644835" rel="nofollow noopener">my shop</a>

F# Major Flute / Whistle / Windinstrument

flute-instru

GlennovitS 3D

Want a fidget toy from outer space? It will land on you desk very soon! Just print, spin and play - and enjoy. And please share your makes, in 1 or more colors :-)(If you want other toys, and maybe fidget toys in particullar, then follow me for more - and see my super popular Tactile Fidget Rings!)<a target="_blank" href="https://makerworld.com/en/models/65777#profileId-69112" rel="nofollow noopener">https://makerworld.com/en/models/65777#profileId-69112</a><h2>Overview</h2>The model is print-in-place. But within the slicer you can color it easily (fx. in Bambu Studio). You can also download my pre-painted print profiles and simply hit print!Does it spin forever (or even close)? No! But does it look cute? Yes! :-)<h2>Assembly</h2>None. Just print and play!<h2>Print instructions</h2>Should be pretty straight forward with default settings. But a couple of notes:<ul><li>Brim: No (to avoid the parts fusing together)</li><li>Supports: No - the model is designet to print easily without :-)</li><li>Layer height: To get a smooth curve, you can use adaptive/variable layer height.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

UFO Fidget Toy (spin and play)

fidget toys

EzzySziggy

Fat Piggy Bank

coin bank

Geometric self-watering planter with quick water check and refill. Designed to ensure perfect irrigation of the plant root system.For printing, I recommend using the attached files in STEP format. To print the "planter_head" model, you need to set the supports.Printing recommendations: - Use PETg, ABS or ASA, do not use PLA. - set a minimum of 4 walls and 10 - 15% infill to ensure the water permeability of the potEnjoy! I will be glad if you share your colour combinations!&nbsp;You can also download the locker in the photos here:https://makerworld.com/en/models/147580#profileId-176565&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/479694/2024-01-31_4d3bdc605ccfb.png"></figure>

Self-watering planter/flower pot

plants

christofer.jh

Latte art stencil, Poison

Poison stencil

cookie mold

Print Design

You can easily assemble all pieces printed at once. No support needed and I recommend printing all parts vertically like in the profile. Very fun and works great ;).&nbsp;If Lighter is loose in the sleeve I recommend wrapping a little piece of tape(any) around it and it will be fine (sometimes happens sometimes not, ig it depends on the printer or the lighter). This model was made for the bic mini and all lighters of mini size.

Lighter sleeve Balisong Butterfly Knife

sword-weapons

3D design shop

I made this version of deadpool, with a cool detail where you can pull out his sword.&nbsp;&nbsp;&nbsp;design by eastman on printables. https://www.printables.com/model/36689-deadpool-bust-remastered-supportless-edition-stl