YangG

crabstiks

I designed a bottle holder for 85mm diameter bottles, this seems to be the common size for Isopropyl Alcohol bottles for the HSW / Honeycomb storage wall.

bottle holder for 85mm diameter bottles, the common size for Isopropyl Alcohol bottles for the HSW 

洞洞板

agepbiz

Print-in-place and Articulated Surprise Egg #1 - Tiny Haul Truck 'Making of' video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=baKauAFH-lI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/baKauAFH-lI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>*edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue)Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.Both the truck and the egg was each designed to be printed as all-in-one objects without any support structures. The truck has rotatable wheels and a tiltable bed. The egg is hinged&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a> WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>Unassociated tags: surprise egg<h3>Category: Toys & Games Print Settings</h3>Rafts: NoSupports: NoResolution: 0,1Infill: 40

Surprise Egg #1 - Tiny Haul Truck

Muunk Studio

This is a Tesla Cybertruck Kit Card designed by Muunk StudioThe Kit Card took advantage of Tesla Cybertruck's paperfolded-like exterior design, and it is printed flat, folded to an angle, and assembled. It allows to have no layer line and smooth surface finish on most of the parts.   There are three 3mf. files uploaded:<ul><li>Single Color Kit Card - has all parts included and only prints in single filament  </li><li>[Part 1] 2 Color Filament - printed in two different color filament and does not have all parts included. Must Print [Part 2]</li><li>[Part 2] Platform Part - prints in single filament color and must have [Part 1] printed to complete the assemble.</li></ul> Pre-folding along the scored line of surface helps when assembling.Please be careful when assembling, as fitting channels are small and fragile. Every parts should snap fit, EXCEPT for the Window detail. Window is not a snap fit, you have to use glue for window.&nbsp;Please follow the instruction below, for any question shoot me a message or comment below.And as always thank you and enjoy.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_ba3f8a4c42c9b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_2fd546df155e3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_cac77df71344a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_278a4f85300c2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_f45d1e3220b5d.jpg"></figure>

Tesla Cybertruck Kit Card_Designed by Muunk Studio

模型玩具

make

Covering screw sizes from M3 to M12, optional, M3 thread diameter 3 and so on, M12 thread diameter 12, height includes 10-50

Complete set of screws and nuts 螺丝 螺母

五金

rauberdaniel

This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on all Sony cameras. It should fit on any other camera brand as well though. I modeled it similar to the original that ships with the cameras but improved the grip on top.&nbsp;The shown version is a bit more challenging and slow to print, but I’ve also added a simplified model that is much easier and faster to print.

Hot Shoe Cover / Sony Multi Interface Shoe Cover

小配件

Mick23

Calibration cube

校准

Pokzy

Storage holder for Sony NP-FZ100 model batteries.The holder allows for grouping 2 batteries in a compact way, enabling them to be stored in any bag. It also provides additional protection for the batteries.Batteries can be inserted in two directions, allowing for a marker on the batteries to indicate whether they are charged or not.

Case for Sony NP-FZ100 battery

收纳盒

Kamteix

This stand is designed for my House Atreides Ornithopter kit, <a target="_blank" href="https://makerworld.com/en/models/210900#profileId-230742" rel="nofollow noopener">available here.</a>&nbsp;It's primarily designed for the flight configuration, which is more practical. Although it accommodates extended landing gear, the extended ramp cannot be utilized because it prevent the stand to be used. <figure class="image image_resized image-style-side" style="width:21.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/720191/2024-03-05_4e7fa0aef8c21.jpg"></figure>Update 05-03-24 - 17h20 GMTIMPORTANT: If you downloaded the stand before this update, please reprint the interface part that's been modified for the flight configuration kit. &nbsp;<h3> </h3><h3>Recommended Printing Settings:</h3><ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.16 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Assembly Guide:</h3>This stand is designed for the model in flight configuration, you will need to remove at least the access ramp part to mount the Ornithopter on the stand.<img src="https://makerworld.bblmw.com/makerworld/draft/720191/2024-03-03_390b5e598f146.png">Remove this part first<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/720191/2024-03-03_c24cfb444f64d.jpg"></figure>

洞洞板

egg

模型玩具

五金

小配件

校准

收纳盒

打印