0.2mm layer height, 2 walls, 15% infill, just one-click printing, optimized supports
0.2mm layer height, 2 walls, 8% infill, skirt recommended when downloading to print
Power button for 12.9-inch tablet
Except for the plate where you customize colors, it is recommended to print the others with one-click using my print parameters
Print this for thicker phone cases
0.2mm layer height, 2 walls, 8% infill, this enlarged version is recommended as it's more practical
0.2mm layer, 2 walls, 8% infill
0.2mm layer height, 2 walls, 8% infill, one-click printing, no supports
0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 8% infill
0.2mm layer, 2 walls, 8% infill, Print in Place single color
If you need to charge with a case on, print this (left-hand version)
If you need to charge with a case on, print this (right-hand version)
0.2mm layer, 2 walls, 10% infill, optimized print parameters, just one-click printing
0.24mm layer height, 2 walls, 10% infill, separate inner pot
0.24mm layer, 2 walls, 10% infill, separate outer pot
0.24mm layer height, 2 walls, 10% infill, one set, print parameters optimized
0.2mm layer, 2 walls, 8% infill, a pair, printed with TPU
0.2mm layer, 2 walls, 10% infill, red and gold, AMS is required
0.2mm layer, 2 walls, 10% infill