Philou_76

VICLER

Here is a minimalistic snap-fit slim case for Raspberry Pi Zero. Just print 2 pieces, put your pi inside and close the case. This case fits perfect for Zero 1 and Zero 2 models. There is one solid model and one with hexgaon holes for better passive cooling. This case has cutouts for two USB-ports, HDMI-port, SD-Card and Camera-port and due to slim design it fits in every pocket! There is also a .step file of the case for mods in any CAD software. EDIT: added multicolor profile The model is designed to be printed with 0.1mm layer height and arachne engine turned on. For best results and dimensional accuracy, use my print profiles (all the necessary parameters are already tweaked for best results) and calibrate your filament.

Raspberry Pi Zero Slim Snap-Fit Case

Raspberry Pi

Skullkitten

I love totoro, so I like to share this hueforge bookmark &nbsp;i use black, grey and white by kingroon.&nbsp;Start with black filament,change to grey at layer 9 and change to white at layer 14

Hue Forge Totoro Bookmark 3 colors

Marque page

COLOCO

infinity cube

Gadgets

kikaster6

Skull earrings

Bijoux

GlennovitS 3D

<figure class="table"><table style="border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:4px solid rgb(230, 153, 77);padding:0.4em;">Welcome to GlennovitS3D - fun models for everyone! Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models.<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 😁</td></tr></tbody></table></figure>&nbsp;<figure class="image image_resized image-style-side" style="width:35.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/862175/2024-01-22_1cb770cb3d13c.jpeg"></figure>Tested by thousands! Thank you all!! If you want new exclusive textures, check this one out: <a target="_blank" href="https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni" rel="nofollow noopener">https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni</a>There is also a new Keychain version available - check it out here:<a target="_blank" href="https://makerworld.com/en/models/153538#profileId-167762" rel="nofollow noopener">https://makerworld.com/en/models/153538#profileId-167762</a>&nbsp;This might be your future favorite fidget toy - rotating rings with textures - spin them and enjoy!Print the different styles and find your personal favorite - and then give the other prints as gifts ;-) Fits perfectly in a pocket, purse, desktop drawer or right there on your desk.<h2>Overview</h2><figure class="image image_resized image-style-side" style="width:35.05%;"><img src="https://media.printables.com/media/prints/648943/rich_content/64141802-8002-47e7-89e3-0c012c6551ec/thumbs/cover/800x600/jpeg/img_8321.webp"></figure>The Tactile Fidget Rings toy comes in multiple styles.<ul><li>Basic (just the rings - no textures)</li><li>Lines (tilted almost-vertical lines)</li><li>Knurled (for extra “grippynes”)</li><li>Layers (simulating thick 3D printing layers)</li><li>Honeycomb (hexagonal textures)</li></ul>If also comes in 4 MIX versions! In the mix versions, every ring has a different texture for you to enjoy. Which one is your favorite - please share and comment!<h2>Assembly</h2>None! This is print-in-place :-)<h2>Print instructions</h2>Here is a few ideas for slicer-settings:<ul><li>Speed on first layer: 50% (To ensure good bed adhesion take your time here!)</li><li>Supports: NO supports</li><li>Brim: NO brim</li></ul>Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Tactile Fidget Rings (spinning fun toy)

Spinner

Zarol_zz

<h2>Summary</h2>I designed a 3D print bag clip with the little tiny handle , that can help you to release the clip more easily.&nbsp;I recommend PETG PLA+ or ABS as the filament because it has better strength and toughnessIf you like it, please click "like“ it:)Thank you!&nbsp;

Magic BAG clip

Pinces

补补觉去

对原作进行了加长，同时对一些细节进行了修改更便于无支撑打印，不需要金属件。如有需要可以底板涂点胶水。&nbsp;The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required.If necessary, apply some glue to the plate.&nbsp;&nbsp;2024/3/19:增加了一款刀片，根据微技术Microtech刀型制作。可以直接替换原刀片。刀尖尖锐，请注意安全。A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety.&nbsp;2024/3/31:很多人想要短款的。我重新上传了75cm的版本。Many people want short styles. I re-uploaded the 75cm version.&nbsp;2024/4/7:我制作了一个梳子版本。I made a comb version.&nbsp;重新制作了带系绳孔的刀柄，并修复了非流形错误。Reworked the hilt with lanyard holes and fixed non-manifold bugs.&nbsp;加大了一点刀钮尺寸，放在源文件里的pin set V2.stl，如果还是太松可以用点胶水。Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-03-20_cc777c7f008d7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-04-07_83168edc957f7.jpg"></figure>

Longer Tiktok Gravity knife( Various styles )长款萝卜刀

Couteaux

Curious Mint

A tool to create and customise your own Lego compatible bricks.You need to first install <a href="https://openscad.org/index.html" rel="nofollow">OpenSCAD</a> to be able to open the customiser tool and be able to export the STL file for printing.Good accuracy is required to produce Lego compatible bricks, watch <a href="https://www.youtube.com/watch?v=GUz4YCnuNOQ" rel="nofollow">this YouTube video</a> if you're having trouble.DisclaimerLEGO®, the LEGO logo, the Minifigure, and the Brick and Knob configurations are trademarks of the LEGO Group of Companies which does not sponsor, authorize, or endorse this.Remixed from a model by <a href="https://www.thingiverse.com/Lyl3" rel="nofollow">Ly3l</a> on Thingiverse

Lego Brick Generator Tool

Lego

Kit Crafters

<h3>It's just a tiny box.</h3>Hi all! I made a small shelf organizer for the <a target="_blank" href="https://makerworld.com/en/models/84611#profileId-90456" rel="nofollow noopener">TinyBox</a> design I shared previously. My partner loved the little boxes and asked for a way to store them and so I whipped up this simple shelf organizer.Enjoy!

TinyBox - Storage Shelf

Boites

FrancescoM

<h2>Broom no need support</h2><h2>08.04.24 new upgrade TOOL HOLDER</h2><h2>use 3x8mm screws</h2><img src="https://makerworld.bblmw.com/makerworld/draft/834053/2024-04-08_169a445f9049d.gif"><img src="https://makerworld.bblmw.com/makerworld/draft/834053/2024-04-08_24d3f9d3a74a3.jpg"><h2> </h2><h2>Do not cut the back part with your hands, use scissors or a cutter</h2><img src="https://makerworld.bblmw.com/makerworld/draft/834053/2024-04-02_fddcc25700e86.jpg">&nbsp;Don&#39;t leave negative comments, but give useful advice to improve the project, so as to help the community improve. Thank you&nbsp;&nbsp;&nbsp;

Poop cleaning set

Utilitaires

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

Figurines

Mr.Jay

Wonderwoman logo coasterSize 10cm<a target="_blank" href="https://makerworld.com/en/u/2093862659/collections/554527" rel="nofollow noopener">Click here for more superhero logo coasters</a>

Wonderwoman logo coaster

Sandrine

Maker1O1

Improved V2 version with articulated legs, V1 had over 3k downloads here so here it is V2. ENJOY!!&nbsp;Originally remixed by NavierIsStoked and licensed under CC-BY-NC-SARemixed for AMS, and improved scaling by ME.&nbsp;

!!NEW!! Articulated Axolotl V2  Print in place AMS or single color 

Chloé

geekm0nkey

This is a Fallout-inspired Folding D20. It's approximately 65mm. The snaps did not lock for me so I used UV resin to bond the joints.As a happy accident, I realized my yellow was UV reflective, so it makes it look radioactive which is on point for a Fallout D20!