I printed several of these with TPU. For the first day or two they held up great. Everyone loved them. But the force placed on the lever to raise the cards started to cause the sides to weaken anti and the lever would pop out of place. I am going to reprint them with a slightly thicker wall and see how they turn out. But more than once I have pulled it out to pay for a purchase and the clerk asked about where I got it from and a couple of them have printers so I know there are a few more downloads coming.

if you don’t let it cool it will bend and never close. if you let it cool the hook is almost impossible to get open. interesting idea though

this good enough with the clip that I would use this over the Bambu spools

this looked great. I printed the eye sockets with glow in the dark filament and it looks amazing.

these do not have a good hinge. the board becomes circular shape if left rolled up and the board does not flatten out after a while. if it had a real hinge design instead of just folding a thin flat surface it would be perfect. there is also the opportunity to make it magnetic

these look really good. great detail on the wood. only thing I would change is to make the inside of the barrel all wood and get rid of the metal band on the inside.

Would have given it a 5 if the eyes were printed separately. The problem is that if you change the color with AMS then the color bleeds through to the yellow because the black for the eye is actually a wedge that goes to the core of the head instead of just the surface of the eye.

Grandkids wanted to play Sorry and a piece was missing. 15 minutes later they were in full-on game mode.

This is the one to print. It is strong and works well.

the frame helps keep the pieces together until you use them.