user_3914247397

craycray

Update 2024-04-14:Added a V2 version with captive magnets, meaning the Ikea styrbar can now be mounted via the integrated magnets.Note that the Ikea Styrbar has + magnets on the left side, and - magnets on the right side. Make sure you place the magnets correctly, if unsure, use the Styrbar unit to see when it attracts the magnets.Magnets used: https://www.amazon.se/dp/B07D33PG7Y&nbsp;Replaces the “switch” part in an EU light wall switch with a blank model.Simply use the provided sticker/tape from the Ikea controller (V1).&nbsp;V2 uses the integrated magnets in the Ikea Styrbar, note that the Styrbar has one side with + and one with -. So the two magnets on left side should have + and the two on the right -.&nbsp;A cutout is placed to the right and left side for easy removal.&nbsp;If you want to support my work you can buy me a coffee here :)https://www.buymeacoffee.com/craycray

Ikea Styrbar Mount (EU)

Hemautomation

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Hemautomation

Plants