user_3913412937

Vejstrk

<h2>LUMINOUS MOUNTAINS SILHOUETTE</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_bc06b4de30245.jpg"></figure>&nbsp;The model is also designed for printing on small Bambulab A1 mini printers.&nbsp;The individual parts need to be glued together (the parts contain centering points for easier assembly).&nbsp;I recommend printing from PETG material, due to heat resistance. The Solid variant can be printed from PLA.&nbsp;<h4>!!Parts marked with the letter T need to be printed from translucent filament.!!</h4>&nbsp;<h3>Dimensions</h3>If necessary, the scale can be adjusted.<figure class="image image_resized" style="width:60.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-17_caff00f461875.jpg"></figure><h3>Mounting points</h3>You can hang the model on nails or stick it with double-sided adhesive tape.<figure class="image image_resized" style="width:58.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_4d3f633629d52.jpg"></figure><h3>Variants</h3><h4>Horizon</h4><figure class="image image_resized" style="width:60.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_325a44397cc6b.jpg"></figure><figure class="image image_resized" style="width:59.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_c1d2005566043.png"></figure>The length of the led strip is 124 cmThe cable can be routed through the center or at the edges<h4>Sun</h4><figure class="image image_resized" style="width:46.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_74de918428361.jpg"></figure><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_2c98a6863ea8b.png"></figure>The length of the led strip is 48 cm&nbsp;<h4>Solid</h4><figure class="image image_resized" style="width:50.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_3750595b6e0ba.jpg"></figure><h3> </h3><h3>Electronics</h3>You can use WS2812B RGB LED Strip Light from Bambu lab store&nbsp;The model is designed for led strips (max 10mm).&nbsp;I recommend led strips of warm colors (2000-3000 K) or RGB.&nbsp;&nbsp;<h2>Assembly</h2>The parts are described from the back. For the Horizon variant, the 1T diffuser belongs to part 1, etc.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_9016e85d17c46.png"></figure>&nbsp;&nbsp;

Luminous mountains silhouette

decor

Kamteix

With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.Available in 256x256 to 120x120 (check details for 120x120) printing plate sizes.&nbsp;Assembly Guide avalaible further down<h3>Features:</h3>The model can be displayed in either flight or landed modes.The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.<ol><li>Foldable Wings: Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li>Landed configuration: This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li>Flight configuration: For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3>Recommended Printing Settings:</h3>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:<ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.08 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Kit options:</h3>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :<h4>Standard Kit with Full-Length Wings:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.<blockquote>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4>Compact Kit with Short Wings:</h4>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4>Small bed Kit:</h4>An adjusted option without wings for printers with a 180x180 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4>Separate Wing Kits:</h4>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4>Individual Components:</h4>Every part is also available separately for those looking to print without the kit aspect or specific replacements.&nbsp;<h4>120x120 printing beds</h4>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate<ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul>&nbsp;(yes I got a bit carried away by the fun of designing the kit versions :p)&nbsp;<h3>Assembly Guide:</h3>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.

Dune - House Atreides Ornithopter - Kit

card kits

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you!&nbsp;We present to you, our final model on Maker World, classic Batman! Printable on any machine with 4 color AMS capabilities, this is our vision of the Caped Crusader before power suits and bath robes.&nbsp;Standard black, grey, white, and yellow. Used Ziro PLA “Skin” for face.

Bricks Batman Classic

Brick Man

halil_d

Picknick Cupholder Pike 1-4

garden

Bambu Lab

This halloween Jack-o-lantern project offers two types of 3D-printed lamps. The top and bottom parts of the lantern are connected to the cap and lamp base via a quick-release structure. When the lamp base is installed on the top, it can serve as a handle. Each of the three caps features a different cutout pattern: skull, spider, and bat. Light can shine through the cap to project the patterns onto the table.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000039480/design/2023-10-13_a47450404ffd6.gif"></figure>&nbsp;Recommended filaments: Bambu PLA Basic Orange(10300)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40909351485555" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40909351485555</a>If you have other Halloween models to print, you can also purchase Halloween Pack filament<a target="_blank" href="https://store.bambulab.com/products/halloween-pack" rel="nofollow noopener">https://store.bambulab.com/products/halloween-pack</a>&nbsp;Compatible Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.

Halloween Jack-O’-Lantern

Halloween

mochr

windmill machine turbine2x bearing 10x15x4&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/1jGlGA_DJPo?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=1jGlGA_DJPo"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/1jGlGA_DJPo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

F*cking windmill

funny

Sairae

V2 Now Available! <a target="_blank" href="https://makerworld.com/en/models/412624#profileId-314579" rel="nofollow noopener">https://makerworld.com/en/models/412624#profileId-314579</a>&nbsp;Introducing the Q-tip shooter! Simply load a one-sided Q-tip, pull back the spring, pull the trigger, and launch. Thank you to ThisFact for the inspiration from their toothpick shooter. However, this is not a remix of that model, it is my own design.&nbsp;Note: If you choose, you can light the end of the Q-tip on fire for added style. However, please use with extreme caution and only use outdoors away from people and flammable objects.&nbsp;&nbsp;

Q-Tip Shooter V1

bathroom

KENNETHSHAWN1986

This is a collection of my hobby tool designs.&nbsp;This bundle contains :&nbsp;The wetpallete with a interchangeable hardpallet and has the option to ingrave your svg logo in the top lid and in the glass holder makeing it your custom pallete, a garentee that all your hobby buddy&#39;s would ask you to print them one.download link if you only want the wetpallet: <a target="_blank" href="https://makerworld.com/en/models/381698" rel="nofollow noopener">https://makerworld.com/en/models/381698</a>&nbsp;The painting handle that has a turning disk at the top that you can scale to almost anny size you need be it for your wargaming of other bigger miniatures this handle wil help you in your painting needs as far as handles go.Download link if you only want the Painting handle: <a target="_blank" href="https://makerworld.com/en/models/251062" rel="nofollow noopener">https://makerworld.com/en/models/251062</a>&nbsp;And ofcorse we can not for get the brush wash board this washboard cleans your brushes with out damageing them and fits almost anny jar or container you use.Download link if you only want the washboard: <a target="_blank" href="https://makerworld.com/en/models/140756#profileId-189484" rel="nofollow noopener">https://makerworld.com/en/models/140756#profileId-189484</a>&nbsp;&nbsp;The vallejo paint holder is seperate from this bundle: <a target="_blank" href="https://makerworld.com/en/models/450526#profileId-357521" rel="nofollow noopener">https://makerworld.com/en/models/450526#profileId-357521</a>&nbsp;

The ultimate paint kit

painting

Michael Rechtin

&nbsp;Full Build Detailed in Youtube Video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=h6chNEaXb-o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/h6chNEaXb-o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Hardware List: (Affiliate Links) Motors: <a target="_blank" href="https://amzn.to/4c5N0SW" rel="nofollow noopener">https://amzn.to/4c5N0SW</a> Flight Controller: <a target="_blank" href="https://amzn.to/43eu3ZS" rel="nofollow noopener">https://amzn.to/43eu3ZS</a> DJI O3: <a target="_blank" href="https://amzn.to/431EGiR" rel="nofollow noopener">https://amzn.to/431EGiR</a> 2mm Bullet Connector: <a target="_blank" href="https://amzn.to/3In6B3l" rel="nofollow noopener">https://amzn.to/3In6B3l</a> LEDs: <a target="_blank" href="https://amzn.to/3uV63hX" rel="nofollow noopener">https://amzn.to/3uV63hX</a> Props: <a target="_blank" href="https://amzn.to/3IpEkc9" rel="nofollow noopener">https://amzn.to/3IpEkc9</a> 4s 1300mah Batteries: <a target="_blank" href="https://amzn.to/436hHmL" rel="nofollow noopener">https://amzn.to/436hHmL</a> M4x12 Bolt: <a target="_blank" href="https://amzn.to/3T6co23" rel="nofollow noopener">https://amzn.to/3T6co23</a>&nbsp;FPV Equipment (Other products may be able to be substituted): RC Controller: <a target="_blank" href="https://amzn.to/3VbpZYy" rel="nofollow noopener">https://amzn.to/3VbpZYy</a> FPV Goggles: DJI FPV Goggles V2

100MPH FPV Race Quad

drones

uhltimate

V2 Flying Toroidal Propeller&nbsp;Pull the rod, and the propeller takes off, offering a seamless and exciting aerial experience. Simple, efficient, and designed for enthusiasts who crave controlled flight. Elevate your adventures with the Flying Toroidal Propeller! — a playful toy for kids. With a propeller, base, and simple pulling rod, it brings excitement to young aviators.Pull the rod, and the propeller takes flight, offering a fun and straightforward aerial experience.&nbsp;Designed with simplicity and safety in mind. Elevate your adventures with the Flying Toroidal Propeller!&nbsp;Info: The toroidal design works better than expected. Use it outdoors; it's pretty strong and flies quite high.&nbsp;V2 - 26.12.2023After receiving feedback from numerous children aged 5 to 10 years old, a few modifications were made:<ul><li>The holder was made slightly taller. </li><li>The propeller was strengthened (eliminating the weak point)</li><li>The pulling rod was lengthened (by five teeth)</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/326542/2023-12-03_793a44954c08b.gif"></figure>

Toroidal Flying Propeller (Pull Copter) & Spinning Top (No Supports, No Assembly Required)

fans

MagnetDanny

Rocket's head pops out of your pocket, ready to unleash his wit and weapons at anyone who crosses you. With just a flick of the wrist, you can fling this Guardian of the Galaxy character into imaginary battle. His one-winged body is shaped like a boomerang, inscribed with the phrase "Rocket Pocket" for a fun play on words. Tap into Rocket's fierce temper and bad attitude when you need some backup!It's also one-stop-shop for all things mischief and shoe-related:This pocket-sized wonder is a must-have accessory for anyone looking to unleash their inner fury or just needing a little extra help slipping into their favorite kicks or hold their keys.With its sassy Rocket Racoon design and clever functionality, the Rocket Pocket is the perfect blend of mischief and practicality!&nbsp;

Rocket Pocket

boomerang

Jonas Daehnert

<h3>A really loud, flat whistle that you can comfortably carry in your wallet.</h3>About the Whistle:With a thickness of only 3 mm, the flat whistle fits in any wallet. Despite its flat design, it&#39;s really loud. It is also possible to wear the whistle as a chain or attach it to a keychain.&nbsp;Sound:It has a clear double tone. Due to the size, the sound is quite high. But it is enough to get attention. &nbsp;Dimensions:43 x 22 x 3 mm (additional variants 43 x 22 x 4 mm - 43 x 22 x 5 mm - 39 x 11.5 x 3 mm)&nbsp;How to Print:I recommend using a nozzle size of 0.4 mm and a layer height of 0.2 mm. Don&#39;t use supports. It&#39;s very important that the first layer is perfect, because the wall thickness at the top and bottom is only 0.6 mm. If your printer is well leveled, however, there should be no problems.&nbsp;Troubleshooting:If your whistle doesn&#39;t work properly or you have problems printing a smooth top surface, make sure the <a target="_blank" href="https://help.prusa3d.com/article/layers-and-perimeters_1748#layer-height" rel="nofollow noopener">layer height</a> is set to 0.2 mm. This ensures that the bottom and top surfaces are printed at the correct thickness. You can also experiment with the <a target="_blank" href="https://help.prusa3d.com/article/layers-and-perimeters_1748#perimeters" rel="nofollow noopener">perimeter value</a> if there are problems with bridging. Any value between 2 - 3 is recommended. And last but not least, the <a target="_blank" href="https://help.prusa3d.com/article/layers-and-perimeters_1748#solid-layers-top-bottom" rel="nofollow noopener">solid top/bottom layer</a> should be set to at minimum 5 each.&nbsp;Print time:~ 10 - 20 min (depending on your settings)&nbsp;Happy whistling!&nbsp;&nbsp;&nbsp;

Flat Pocket Whistle

tools

Faran3D

<h3>Welcome to V2 of my Fallout Nuka Cola Series!</h3>This is a series of replicas of the Nuka-Cola drinks from Fallout with the classic rocket shape and fins, and logos and colors matched to the ones you find in game! This is the second version after deciding to make a better bottle and improve the labels.&nbsp;The Nuka Cola Quantum is immediately recognized for its glowing blue bottle, purple label & cap and bright yellow lettering. While a perpetual glow isn't really possible, you can simulate this with ease by simply using blue luminescent “glow” filament and charging it with some light.&nbsp;Printing is absolutely straightforward - no supports or anything is needed and this is an AMS print so little to no post processing is required.&nbsp;As with all AMS prints it is more economical to print several copies rather than just one so print a few copies at the same time and use them to decorate several places or give away a few, but please don't sell them!&nbsp;Please like and rate this print, your support is appreciated!

V2 Fallout Nuka Cola Quantum AMS Bottle and Cap

Fallout

Army of Won

I'm sad I missed the Christmas contest, but it's never too late to spread some Christmas joy - also, this model is a flying model!&nbsp;You better watch out, you better not cry... The Santalorian is here and you don't want to be on his naughty list!&nbsp;As a thank you to all I'm offering the Santalorian 3D model for free to everyone in the 3D printing community. This fun 3D model can is print-in-place and can be printed with NO SUPPORTS. Unfortunately, I don't have the AMS, but if anyone wants to do a multicolor print, please post some pics for me!&nbsp;Go forth and make something EXCELLENT! This toy is offered free for personal use only, however, if you wish to sell printed versions please join our Patreon community to obtain a commercial license: <a target="_blank" href="https://www.patreon.com/armyofwonstudio/membership" rel="nofollow noopener">https://www.patreon.com/armyofwonstudio/membership</a>.

the Santalorian - print in place, no supports needed

christmas

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

games

Spenny

Swap Instructions: Start with Black At layer #2 (0.24mm) swap to Red At layer #8 (0.72mm) swap to Orange At layer #16 (1.36mm) swap to White Note: If you are using the raw stl without the God of War logo, skip the below swaps At layer #27 (2.24mm) swap to Black At layer #68 (5.52mm) swap to Red for rest

God of War Kratos Portrait - Hueforge

Game props

fay3dlab

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version.. i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..&nbsp;UPDATE:I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually&nbsp;UPDATE 2:I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship.. i've upload the file at <a target="_blank" href="https://makerworld.com/models/113145" rel="nofollow noopener">https://makerworld.com/models/113145</a> <img src="https://makerworld.bblmw.com/makerworld/draft/491035/2023-12-30_4312a40409637.gif">

Suspended Millennium Falcon

star wars

thelightspd

THIS IS THE WORLDS FIRST AIRLESS FOOTBALL. I have done testing to make sure that the football is about 400 grams the same weight as a regular football. Printing on end… I am printing one now. This is should be fun.

WORLDS FIRST AIRLESS FOOTBALL (AMERICAN FOOTBALL) NFL

sports

zuperbuuworks

This is a set of 4 marvel keyrings. I usually make all the orange parts red, except on miss minutes, and the purple parts blue. The white parts I print in either white or silver, again except on miss minutes who looks better with white.If you like this work, please consider looking at my other files, or my website.

Marvel Keyrings

marvel

Kasparino

Next in my series of miniature defence objects comes this neat little tower with a doorway, slit hole, ladder and upper floor with its own cover.&nbsp;Great for miniature wargames, dioramas or play.&nbsp;The upper section simply slides in place and its ready. As usual; scale it up or down depending on your own needs.&nbsp;Do enjoy!

Defence Tower/ Bunker

lego

kace3d

Time travel device for all of you who know what this is.Print in place, no supports needed.Each part in the model can be recolored as you like as many colors as you want.Model has mounting hole on back side to hang on wall.I added some small wires I had laying around to add a unique touch.Your results (relating to time travel and all associated butterfly effects) may vary. Proceed with caution.Model measures approximately 170mm x 201mm x 30mm&nbsp;If you'd rather print this in parts and assemble/glue together to save so many filament changes and purge poops, please see my <a target="_blank" href="https://makerworld.com/en/models/134445#profileId-145911" rel="nofollow noopener">parts version here</a>.

Time Travel Device Flux Capacitor

movie/show props

Gatto

<h2>C3-POT: The Droid-Inspired Planter for Your Botanical Bounty</h2>Ever craved a plant pot that&#39;s as charming and witty as our favorite protocol droid? Look no further than C3-POT! This 3D printed marvel isn&#39;t just another planter - it&#39;s a statement piece, a conversation starter, and a delightful companion for your indoor jungle.Features:<ul><li>Polished Protocol Design: Inspired by C-3PO&#39;s iconic golden form, this pot captures his essence with a low-poly twist, making it both modern and instantly recognizable.</li><li>Fluent in Flora: Sized perfectly for small to medium plants (think ferns, air plants, or even a mischievous venus flytrap), C3-POT offers a home for your botanical bounty.</li><li>The Perfect Rebellious Gift: Surprise your fellow Star Wars fan (or, let&#39;s be honest, yourself) with a unique and geeky present that&#39;s sure to impress.</li></ul>But beware, plant parents! C3-POT may come with a few… unexpected features:<ul><li>Sudden Plant Growth Spurts: Don&#39;t be surprised if your flora starts channeling its inner droid, growing with newfound vigour and efficiency.</li><li>Mysterious Whistling: No, it&#39;s not the wind through the leaves. It might just be C3-POT plotting its next… photosynthesis escapade.</li><li>Strange Whispers of &#34;Moisture Levels Optimal&#34;: Okay, this one&#39;s a stretch, but hey, you never know with this droid-inspired botanist!</li></ul>Download the free 3D model now and bring a touch of the galaxy to your home! Remember, the Force (and a healthy dose of plant care) will be with you… and your C3-POT.May your fronds be plentiful and your droid-induced side effects… manageable.P.S. We accept no responsibility for any intergalactic plant rebellions that may or may not occur after using C3-POT. Use responsibly and with a healthy dose of humor.  <a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000195221/design/2024-04-15_4fefedc8921d9.gif"></a><figure class="image"><a href="https://makerworld.com/en/@Gatto" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000195221/design/2024-06-16_32117daa8fb33.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener">Check out my profile for other models and follow MEOW!</a>

C3-POT - A Star Wars Low-Poly Vase

plants

briankstan

VW Bus “Surfing Lifestyle” Hueforge print. 200mm x 160mm&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Sky Blue Transmission Distance: 8.6PLA+ Sunlu Sunny Orange Transmission Distance: 5PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Sky BlueAt layer #14 (1.2mm) swap to Sunny OrangeAt layer #19 (1.6mm) swap to White for the rest.&nbsp;&nbsp;if you want to change your slicer and do it at 0.04mm Layer height use the setting below, this is what I printed the included photo at. takes to long to slice so kept erroring out on Makerworld. &nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Sky Blue Transmission Distance: 8.6 PLA+ Sunlu Sunny Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Sky Blue At layer #22 (1mm) swap to Sunny Orange At layer #31 (1.36mm) swap to White for the rest.

VW Bus "Surfing Lifestyle" (hueforge)

beach

Sevro

Update:28.03.2024 - I redesigned the lamp a bit. I made it a little thicker, so now it is compatible with 12 mm LED strip and is also stronger.&nbsp;I used to this version LED STRIP from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>&nbsp;&nbsp;The diffuser has a larger flange and fits better into the main ring.I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers <figure class="image image_resized" style="width: 68.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_e7c1da1fbecee.jpg"></figure>I created new print profile with this new design and will be develop this project with this size of lamp.If you want use front panels of other designers make sure that is proper size. If it too small just easy enlarge it to 110 % in X and Y axis <figure class="image image_resized" style="width: 44.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png"></figure>&nbsp;02.02.2024 - New front panel added : Deer in the forest05.02.2024 - New front : Birds in love&nbsp;&nbsp;Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- PLA or ASAIf you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.Electric parts you need.<ul><li> led stripe - I used: LED COB 8W/1M 12 V, 8mm wide - choose one that can be cut every 2.5 cm</li></ul><figure class="image image_resized" style="width: 430.185px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/6db55f53-37bb-4cbb-ba60-486465aa3c52.webp"></figure><ul><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 424.403px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp"></figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 424.332px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png"></figure><figure class="image image_resized" style="width: 425.98px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/4ed0768e-9f72-45b5-9dc0-72aa2a703338.png"></figure><ul><li>Charger 12V</li></ul><figure class="image image_resized image-style-align-center" style="width: 434.759px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/1b0daae1-d790-41b4-a6da-4028c899a774.webp"></figure>Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

lights 

ValdiLab

I'm a big fan of Harry Potter, and after seeing several Starbucks-like designs I searched and didn't find any coaster that had this very funny image capable of giving a bit of a good mood when you just woke up in the morning and have absolute need for coffee to start the dayHope you like it!

Harry Potter Coaster - Espresso Patronum

harry potter

Elmaker Design

St Patricks Day - Dual Sided - Door Sign&nbsp;Dual sided door sign can be placed on left and right side, easy to print with AMS. &nbsp;Also have no AMS version <a target="_blank" href="https://makerworld.com/en/models/186059#profileId-204783" rel="nofollow noopener">https://makerworld.com/en/models/186059#profileId-204783</a> &nbsp;Happy Printing

St Patricks Day - Dual Sided -  Door Sign

st patricks day

NUKDDD

Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;These eggs will look great day and night by themselves or next to other decors.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to 40mm in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Easter Bunny Egg Lamp 

easter

Ross3D

This is a medium-sized stationery / tool holder with the design of Bambu Lab's P1S tool head.I took some liberties in slightly flattening the toolhead to maximize the available space for storing stationery or tools.&nbsp;Included in the model files are complete unit, as well as split unit for those who want to reduce waste. They can be attached with superglue.&nbsp;Update 03 Feb 2024:I've also made the A1 Toolhead variant: https://makerworld.com/en/models/169124

Bambu Lab Toolhead Stationery Holder / Pen Holder / Pencil Holder / Tool Holder

household

dimensionaldesignky

This donut handle is way easier to use and is smooth as butter with the adaptive layer height.&nbsp;I printed mine in PETG&nbsp;I also included both hex decors as requested. I scaled the door hex to 102%, upper hex is 100% an donut handle is 100% in the 3MF FilesHex decor is thanks to Rob G (https://makerworld.com/en/models/34214#profileId-31421)&nbsp;Please let me know if there is anything I can do to help or if you have any questions!&nbsp;Thank you for your Interest.

Bambu Donut Door Handle

PrinterMods

3D Print Masters Hub

Golf Putting Cup Golf Hole-Easy print-Great fun with the family. Practice your putting!-Please like and subscribe! More to come!<ul><li>🔥🔥 Great surprise for members! See this link for EXCLUSIVE 3D print models: <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥</li></ul>

Golf Putting Cup Golf Hole

golf

OlleMark

The Button Fidget is relaxing and satisfying stress reliever with 4 buttons that can be pressed over and over. Its not the quietest fidget toy so be aware. :D&nbsp;No assembly is required because it was designed to be print in place.&nbsp;Printed with bambus standard settings as shown below:<img src="https://makerworld.bblmw.com/makerworld/draft/164135/2023-11-10_0c9addac88474.png"><img src="https://makerworld.bblmw.com/makerworld/draft/164135/2023-11-10_7902e10def753.png">

Button Fidget Print In Place

fidgets

Big Plate Chicken

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/EF0wKgbhywc?si=mggXdYYncWT3ia03"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=EF0wKgbhywc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/EF0wKgbhywc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Can you imagine? We made 7 adjustments and optimizations for this model, spending nearly a week on the optimization! Now, it's finally without major issues! This 3D printed model design, we named it the Radish Cannon! It can not only launch projectiles, but it also doesn't require supports and is a one-piece print. If you have the AMS multi-color system, that's even better, as it can be printed in multiple colors in one go, making it look more attractive! Welcome to download and print~ It requires a 0% infill rate, with the wall thickness set to 0.8mm! If you like this design, please click the 'like' heart button to show your appreciation and support!,please follow us on Twitter: <a target="_blank" href="https://twitter.com/BPCSbpcs" rel="nofollow noopener">https://twitter.com/BPCSbpcs</a> Feel free to contact us if you have any questions.

Radish Cannon (Print-in-Place)

print in place

Nardo3D

Beware of immitators!  This is the ORIGINAL Modular Mini-Golf game on MakerWorld!&nbsp;The most important part of working in an office is avoiding doing actual work! Procrastinate all day long with Nardo's Modular desktop mini-golf set! Arrange dozens of tiles to create unlimited unique miniature golf holes.&nbsp;Featuring a grid-based modular design (heavily inspired by the Gridfinity system-but much smaller). Includes nearly two dozen unique tiles, with more to come in the future!&nbsp;Putter is designed to fit on the end of a standard Bic “Round Stic” style pen.&nbsp;UPDATE 1/24/2024 - Updated tile quantities based on feedback & testing, as well as a more robust putter design! Ball not included - I recommend a 9 to 10 mm plastic ball bearing (easily found on Amazon) or you can try printing a 10mm sphere.&nbsp;Tip: A vacuum pen (example: <a target="_blank" href="https://www.amazon.com/YXQ-Vacuum-Sucking-Suction-headers/dp/B07MLW5TKP" rel="nofollow noopener">https://www.amazon.com/YXQ-Vacuum-Sucking-Suction-headers/dp/B07MLW5TKP</a>) makes lifting the flat tiles a breeze!&nbsp;Choking Hazard! Small parts, not for children under 3!

The ORIGINAL Modular Desktop Mini Golf Set

toys

Scubafan

I created a stand for my Macbook Air M2 from 2023.There are 2 versions, 1 with an Apple Logo and 1 without a Logo. I printed for myself the Version without the Apple logo.I added a little more room because I do use a case with my Macbook.The slot for the MacBook is 16mm.Just let me know if you need something changed, I will do my best to get back to you.

MacBook Air M2 Stand

stands

teh_chaosjester

Like me, you probably have ended up with a bunch of M2-M5 screw packs that need a home. Why not give them one?&nbsp;These 2x3 Gridfinity bins are for M2 to M5 screws that usually come in packs with some nuts, and lengths from 6MM to 20MM. &nbsp;The text is cut out and can be printed in multicolour to make them stand out a bit more.

Gridfinity M2, M3, M4 and M5 Screw and Heated Insert Holders

organizers

ProjectFilament

Great gift idea for loved ones!<ul><li>I recommend using it with dried flowers only because it would be difficult to clean the inside and it looks cool with dried flowers:)</li><li>20cm tall</li><li>find the planter version on my profile!</li></ul>My designs are protected by Copyright Law. When you download, you do not have the right to sell any digital file or printed model of my designs. To legally sell printed models, you may obtain my permission by signing up to my Patreon through this link:<a target="_blank" href="https://www.patreon.com/ProjectFilament" rel="nofollow noopener">patreon.com/ProjectFilament</a>&nbsp;Stay connected with me on TikTok and Instagram at @projectfilament Print away!