Bullwinkle

Detour

Remix of mitchrichie's excellent clock. I used different textured plates and an AMS to add detail to the face. I redrew the legs to be slimmer. I added features to lock the face and rear plate in place better. I also made the finger hole on the back a little bigger for my sausage fingers. I ended up having to remodel the whole thing and ended up with a slightly different shape to the face.&nbsp;Printing:<ul><li>Face and Rear Plate: Print face down on a textured plate. This adds a nice texture to the face and rear plate. I used a flat black PLA and Geeetech Metal-Like Shiny Silk Bronze Rainbow PLA for the inlay. No supports.</li><li>Decorations: The buttons, bars, and clock hands should be printed face down on the smoothest build plate you have. I used a smooth PEA plate that gives a mirror like finish. Print with a matching bronze like filament to the inlay on the face plate - I used the same Geeetech filament. No supports.</li><li>Legs: Print upside down from the same bronze filament. No supports.</li><li>Adjusters: These are the three decorations that go in the face plate that mimic the clock adjusters on the original. I printed these from a dark gray PLA. Use your most reliable build plate - I used a smooth PEI plate. No supports.</li><li>Body tubes: there are two of these - the main tube and an insert that will go between the face and rear plates. Use your most reliable build plate (smooth PEI for me). Print the main tube rear side down (the front side has the lip on it). Use supports on the main tube, no supports on the rear tube. The main tube also prints OK with no supports, but it's cleaner with them due to the overhang.</li></ul>Assembly:<ol><li>Use four M2 x 8mm screws to attach the legs to the main body tube.</li><li>Insert the decorations into the front plate. You may want to use a drop of CA glue on the back side to hold some of them in place.</li><li>Insert the front plate into the main body tube.</li><li>Install your clock movement into the face plate, and press fit the arms onto the movement. You may need to utilize the CAD files to adjust to your movement's parts. I used this movement: <a target="_blank" href="https://www.amazon.com/gp/product/B07PKJWXBS?th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B07PKJWXBS?th=1</a></li><li>Insert the insert tube into the main body tube. It will push up flush against the front plate.</li><li>Insert the rear plate into the main body tube - put it in bottom side first to catch on the two ridges before pushing the top into place. It should be a snug fit.</li></ol>

Welby Clock

Clock

ToonzFactory

FLEXI PRINT-IN-PLACE HAMMER HEAD SHARK ARTICULATED 3D MODEL FOR PRINTING&nbsp;It&#39;s an articulated print-in-place model that needs NO supports, No assembly, and prints great with PLA&nbsp;This Design are really fun to play with because they flop around and move in any which way.&nbsp;Feel free to Share your Makes and tag me on Social Networks if you print it!&nbsp;You can support me here:&nbsp;Instagram: <a target="_blank" href="https://www.instagram.com/toonzfactory/" rel="nofollow noopener">https://www.instagram.com/toonzfactory/</a>&nbsp;ALL Toonz Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.&nbsp;To legally sell them, you may obtain my permission through this link: &nbsp;<a target="_blank" href="https://www.patreon.com/Toonzfactory" rel="nofollow noopener">https://www.patreon.com/Toonzfactory</a>&nbsp;Thanks for your support, you guys are the best! ;)&nbsp;3D PRINTING SETTINGS&nbsp;No Supports Print-in-place (no assembly) 20% infill to be safe PLA works great

FLEXI PRINT-IN-PLACE HAMMER HEAD SHARK ARTICULATED

Figures

Nova.E

低配版Kit-001，完美适配除了便宜没有优点，TB老王那常年有货，灯成本一块六，还带个4.2V的适配器，要啥自行车？缺点是亮度稍低，功率只有不到3w，但作为氛围灯来说够用了还有就是没有开关，不过可以直接插拔适配器，实在不行插在带开关的插座上也可以

低成本拓竹灯

Brithawkes

Hi All this is my version of a poop shoot for my new P1S fits well and is work great so far.&nbsp; I have added space to put magnets on the backside if you wish but not really needed as free standing. I used the magnet which came with the printer for the scraper as was not going to use them for it.&nbsp;and added the designs on the faces to aid in keeping the side straight but also looks cool :)&nbsp;this is v1 if i find later i wish to change i will update or make a new one. also if you would like me to alter in anyway please let me know.&nbsp;all the best and happy printing.

Clock

Figures

Art

2 print