0.2mm layer, 2 walls, 15% infill

49cm long, segmented plate names indicate whether simulation eyes and patch sizes are needed, 0.2mm layer, 2 walls, 15% infill

40cm long, divided plates, names indicate whether simulated eyes and patch sizes are required 0.2mm layer, 2 walls, 15% infill

30cm long, segmented plates, names indicate whether simulation eyes and patch size are needed 0.2mm layer, 2 walls, 15% infill

22cm long, divided plates, names indicate whether simulation eyes and patch sizes are needed, 0.2mm layer, 2 walls, 15% infill

18cm long, divided plates, names indicate whether simulation eyes and patch sizes are required 0.2mm layer, 2 walls, 15% infill

14cm long, individual plates, names indicate whether simulation eyes and patch sizes are needed 0.2mm layer, 2 walls, 15% infill

21cm long Crystal Viper with 10mm eye patches 0.2mm layer, 2 walls, 15% infill

17cm long Crystal Viper with 8mm eye patches 0.2mm layer, 2 walls, 15% infill

14cm long Crystal Viper with 6mm eye patches 0.2mm layer, 2 walls, 15% infill

17cm long, 0.2mm layer, 2 walls, 15% infill

10cm long, 0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 5% infill

There are two versions, printable with 0.12mm layer, 3 walls, 10% infill

There is a large and a small one, you can choose to print with 0.2mm layer, 2 walls, 10% infill

Optimized 0.2mm layer, 2 walls, 5% infill

0.2mm layer, 2 walls, 5% infill

0.2mm layer, 2 walls, 5% infill

0.12mm layer, 2 walls, 5% infill

Monochrome version 0.2mm layer, 2 walls, 5% infill