Meikel

ZGremlin

If you want to increase/decrease the size be sure to maintain the original Z height (1.82mm)&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest.

Fallout Power Armor HueForge Portrait

Fallout

Fletch

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

NASA Saturn V Kit Card

Space

MottN.

Update 6/25/24: Updated geometry to be a more secure fit and  also fit A1 Mini (big thanks to Aleks89 for feedback and testing on the Mini). &nbsp;After the 3rd time my cable snagged on the upper frame, I decided to make a quick cable guide. I&#39;m not sure why this wasn&#39;t included in the printer design as it seems like it would be a common issue even with the recommended AMS locations.&nbsp;There are lots of ways you could achieve this, mine rides on the z axis and holds the end of the cable far enough in it doesn&#39;t snag on the corner of the frame.&nbsp;It should snap into place with a little effort.

Fallout

Space

Bambu Lab A1