user_3790498062

eatrix

My creation of Robert/People planter, this one is called “Thinker”.&nbsp;For medium sized plants choose medium sized version, cup size 80 mm / 3.15 inch.For larger ones - Large, cup size 110 mm / 4.33 inch.&nbsp;This model can be printed without supports! If you have trouble with bed adhesion turn on Brim.I like to print these planters with fuzzy skin turned on (contour, fuzzy skin distance - 0.08, fuzzy skin thickness - 0.28). It can be printed smooth also, just be sure to check if seam is placed at Back/Rear.&nbsp;When planting cactus or succulents at the bottom I add a little bit of pebbles for drainage and then potting soil. And don&#39;t forget to water it according to your plant needs :)

People planter "Thinker"

花盆

Dawlight

<h3>Updates</h3><ul><li>2024-05-21:  Version 2 of the drive gears, handle and caterpillar as well as an updated print profile has been uploaded.<ul><li>The drive gears now leave less play in the system, reducing the chance of jamming, even without lubrication. </li><li>The handle should be less prone to break, but might need some more force to assemble. </li><li>The caterpillar is still delicate depending on your material, but hopefully less so.</li><li> All parts are compatible with the old versions of the other parts.</li></ul></li><li>2424-05-22: Version 3 of the drive gears has been uploaded. They should be even more reliable than version 2. These are also compatible with all other parts regardless of version.</li><li>2424-06-10: Version 3 of the crank handle has been uploaded. It&#39;s available as an handle_v3.stl under files for now, but I&#39;ll update the print profile when I get home.</li></ul><h3>The Model</h3>I&#39;ve always been fascinated by the movements of insects and other small animals, especially worms, larvae and caterpillars. I thought to combine this fascination with my more recent fascination for the conversion of constant mechanical movement into intermittent mechanical movement. This is a simple, abstract automaton of a caterpillar crawling in circles on a leaf. It&#39;s based on, but not quite accurate to what is commonly known as an inchworm, the larval stage of the Geometer Moth.&nbsp;Anyway! You simply turn the crank and watch as the caterpillar crawls its way around the leaf! Here&#39;s a video of it in action: <a target="_blank" href="https://www.youtube.com/watch?v=e3_RjoHW6k0" rel="nofollow noopener">https://www.youtube.com/watch?v=e3_RjoHW6k0</a><h3>Printing</h3>I used mostly standard settings for all parts except the caterpillar itself, as the tolerances are quite forgiving for the mechanical parts. The covers could benefit from some ironing, though I haven&#39;t tried it myself at the time of writing.&nbsp;No supports are needed if all items are orientated in the intended way. The raw model files have the crank and its handle oriented in a bad-for-printing way.&nbsp;The caterpillar is a delicate part, and requires Arachne wall generation for best chance of a successful print, as well as making it more durable.<h3>Assembly</h3>There are no extra materials or tools needed for assembly, but for smooth operation, depending on the properties of your filaments, some kind of lubrication is highly recommended. Also, the outer lid, while being designed for press fitting, is intentionally not a very tight fit so as to facilitate easier disassembly. For a permanent solution, you could always glue it in place later.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_fd2a6f7698b3c.jpg"></figure>&nbsp;<ol><li>Press the bottom and top driving gears (small, partially toothed gears) together, being mindful of the small pip keeping them correctly oriented to each other. They should hold together simply by friction. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_a739a562340ba8.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_54b52d0fcbe358.jpg">  </li><li>Put the driving gear assembly on the driving axle pin, making sure the toothed side of the bottom gear is pointed downward as seen in the picture. Lubrication on the axle pin, teeth and smooth section of the gears is highly recommended. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_57bf67ce4770b.jpg">  </li><li>Put the big gear with the curved slot on top of the other big gear. Make sure that the bottom gear pin is positioned in the slot as far away from the top gear pin as possible. Hold the two gears together. The teeth of both gears should align. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_84275d2e895b2.jpg">  </li><li>Drop the big gears into the base, making sure that a non-toothed section (any one will do) of the big gear assembly mates with the non-toothed section of the driving gear pair. Also mind the small protrusions on the inside of the base where the lid will sit. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_8ad0d46658121.jpg">  </li><li>Place the outer lid inside the base. The crank hole on the tapered side of the lid really benefits from some lubrication. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_fda1a73d1d43e8.jpg">  </li><li>Press the crank into the hole by the driving gears and and click the crank handle into place at the end of the crank arm. The crank should stay in the hole with friction. Now is a good time to make sure that the mechanism works and feels smooth before the next step. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_b757251dbb313.jpg">  </li><li>Press the center lid into place, minding the small pip that dictates the orientation. Observing the leaf pattern can help as well. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-19_76a497cfbca6.jpg"></li><li>Fit the caterpillar on the moving pins. I found this to be easier in the minimally extended position. The worm may require some bending to make it conform to a nice shape, but I found that after initial tinkering it holds its shape very well. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468733/design/2024-05-21_ea7c449af3816.jpg"></li></ol>Good luck, and let me know if you run into any issues!

Inchworm Caterpillar Automaton

玩具

MadMax3D

Large 220mm Lithophane on a base rotating at .6 RPM. The lithophane was generated at lithophanemaker.com and printed all white. I used a cheap set of watercolors to tint the ocean and land areas. The rotating base uses a small USB-powered, 59 RPM motor with a final gear ratio of 100:1. All stls are provided in the download section.&nbsp;The base consists of five printed parts and some additional parts that can be purchased from Maker&#39;s Supply. See links in the Bill of Materials section below for the parts I used. I used part KA004 White LED Strip, but you could also use part KA001 RGB Strip if you want different color light. Total cost of parts is about $20-$25 depending on which LED strip you choose. Additionally, you will need four M3x10mm and one M3x16mm machine screws.&nbsp;<a target="_blank" href="https://makerworld.com/en/@MadMax3D/collections/1204492" rel="nofollow noopener">See my other spherical lithophanes</a>&nbsp;Printing InstructionsMy profiles have all my preferred settings. Make sure to select your printer, plate and filament in Studio or the Handy App. If you prefer to plate them yourself or have a non-Bambu printer, the Earth lithophane is printed at .2mm layer height, 4 walls and 100% rectilinear infill. There are two height range modifiers set from 10-30mm and 214-250m with .1mm layer height. This reduces the chance of holes and gaps in the shallow-angle areas. I also added some small supports in areas with noticeable overhangs. The base and cover are printed at .2mm layer height and 5% infill. The gears should be printed at 25% infill. All parts can be printed in PLA.&nbsp;<figure class="image image_resized" style="width: 49.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459047/design/2024-05-09_634f6148d7c3d8.jpg"></figure>Assembly InstructionsAssembly is straightforward. Follow the instructions below:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459047/design/2024-05-09_c5129096209c28.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459047/design/2024-05-09_59bfce2b39ccc8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459047/design/2024-05-09_3dbb6b965e099.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459047/design/2024-05-09_60930723a5ffe.jpg"></figure>

Rotating Earth Lithophane

uni3Dworld

High density model of Single Hand VaseFormat STL and OBJCreated in blenderMaterial PLA2 perimeters15 % infillNo Supports

Single Hand Vase

情人

reddadsteve

Road Runner, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros.Road Runner, also known as Beep Beep, speaks only with a signature "beep beep" (sometimes misheard as "meep-meep") noise and an occasional "popping-cork" tongue noise. His nemesis, Wile E. Coyote, utilizes absurdly complex gizmos and elaborate plans to try to catch him, but fails every time.No supports are required. One piece contains built-in supports and one piece contains built-in braces. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed.The assembled model is 155mm tall, 280mm long, and is in proportion to my previously released Wile E. Coyote model.Enjoy!...........................................................................................................Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback............................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10% (see optional special considerations for the dust)Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) eye_black_right eye_black_left ..Yellow: (Paramount3DPLA - Egg Yolk Yellow) beak beak_without_supports (optional piece) foot_left foot_right ..Dark Blue: (Parmount3d PLA - Cadet Blue) head wing_left wing_right ..White: (Overture PLA - White) eye_white_left eye_white_right ..Light Blue: (3DSolutech PLA - Aqua Blue) body tail tail_without_braces (optional piece) ..Transparent: (Bumat ABS - Transparent) (see notes for filament options for this part) dust...........................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. One piece contains built-in supports, beak, and one piece contains built-in braces, tail. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports. The built-in supports are designed for a .4mm nozzle (be sure you do not set your slicer for 'thick bridges') and for the size that the model is presented. Use your discretion for which parts to use if you resize the model significantly. 2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative to ensure the least chance of a print failure, especially since the base of many parts are hidden when inserted into another part. *I used brims on: (no parts required brims or rafts)3 - The eye_black parts are the only parts that are very small. It may be wise to print extra copies in case you drop them.4 - When removing parts from the printer bed, it's a **VERY** good idea to place left/right parts into separate containers to help with the assembly process. Sometimes the difference between the left and right parts is very small but it is still worth keeping track of them and assembling them in their proper place.5 - I just happened to have a transparent ABS on hand, so I used it for this model. I did try a crystal clear filament and personally felt that even though the legs were more visable, the rest of the dust did not look as good. In addition, the feet stick out enough that an opaque filament might still look good for this model.6 - For transparency in the dust for the feet to show through, I used the 'lightning' infill pattern at 10% infill... Assembly tips:1 - Take your time gluing the model together and enjoy the process. Give some thought into which parts to glue together as groups and then gluing the groups together. Let the glue for each group set completely before combining groups.2 - I used 3D Gloop and E6000 to put this model together. I am not affiliated with 3D Gloop but have experimented with different glues for my models and have found that this glue is a great option for my models. Each type of glue has different pros/cons and I found that 3D Gloop was far easier to use than superglue (for me). The E6000 sticky glue that I also use allows more time to position parts and is still the best for smaller parts. 3D Gloop covers the middle ground for me and really works wonders. It leaves enough time to set, so parts can be positioned correctly and it dries fast enough to hold awkward parts without the need for taping. I used the PLA version that comes in a tube. For both glues using a smaller amount is usually better than more glue.3 - The eye_blacks should be inserted into the eye_whites before putting the eye_whites into the head/beak assembly.4 - The neck to head connection is not as convenient as I would have liked due to the shape of the parts. I glued all the head parts together and glued all the rest of the parts together. Once the glue on both sections were fully set, I then joined the head to the body using 3dGloop. A fast drying glue is preferable for this joint.5 - Benoit glued the feet to the body and inserted the combined part with a rotation to follow the opening in the dust. No need of glue. 6 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Road Runner

儿童

tmcnugget

DJI Mini 2 / Mini 2 SE Display Stand

DJI Mini 2 Display Stand

无人机

christoph.h

Atriculated crocodile!!&nbsp;i print it with 0,16 layer height, but 0,20 also works.. Print in place no supports.&nbsp;Check out my other models too!!&nbsp;&nbsp;

Articulated crocodile

海洋

HpInvent

I have designed a beautiful decorative vase for the interior of your car.  This way, you can always have a touch of nature with you in your car.  The vase is perfect for small dried flowers or real plants/flowers by adding some water.For those who want to use a flower that requires no care at all, I have created a rose for you. Simply print it and insert a piece of 1.75mm filament as a stem into the printed plant head. I left the filament piece of the stem slightly longer at the bottom and bent it by hand into 2-3 arcs. This way, it holds better in the vase and is less likely to fall out. (see photos)&nbsp;The set currently consists of 6 different vases, which I would like to expand in the future. Feel free to write wishes or suggestions in the comments.The Vase/Ring on the left side of the bed is for Glass Test tubes  so you can use these Standard Test tubes (16mm) as Vase in the car.  UPDATE 09.04.2024: V2 uploadedI completely redesigned and improved the mechanism to attach the clip to the vases.  Now it is possible to use the same clip for horizontal and vertical grilles and make it more stable. It also eliminates the tolerance issues that may have occured. Some pictures still show the old mechanism.  But from now on you can only download the improved version. VASE 2 Collection now also available under Print profiles!  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-09_2e379dd809f58.png"><figcaption>Improved attachement System (V2)</figcaption></figure> Additionally, the individual elements can also be downloaded separately through the print profiles. Dependent on your print bed adhesion it may be necessary to print the rose with a brim.I printed a bunch of roses on A1 Mini and X1C without any problems, but got some feeback from users that needed a brim for the rose to stick.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-15_f027d438d0393.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420781/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Mini Car Vase SET with Rose / Diff. Vases pots

汽车

wazza10

Articulated hydra, print in place, no supports

Articulated hydra

龙蛋

digitallyforgeddesigns

Immerse yourself in the world of pop culture with the Symbiote Spider-Man, a high-quality 3D model available on makerworld.com. The design, which accurately brings the intellectually gifted Spider-Man wearing his black Symbiote suit to life, promises to be a distinctive addition to your collection. Whether you want to paint a distinctive grim expression on his face or enjoy the sleek black appearance, this model offers endless possibilities.Designed by the talented DFD, the intricate detailing of the model is truly remarkable. Whether it's the web pattern of his suit or the muscularity that depicts Spider-Man's physical strength; each detail is flawlessly brought out in this model. This Symbiote Spider-Man model is primarily designed for FDM 3D printers and for those using resin 3D printing methods, making it a versatile option for hobbyists and professional 3D printers.In addition to being an accomplishment in design excellence, the Symbiote Spider-Man model is user-friendly. You can easily print it on your home 3D printer and then paint it to bring Spider-Man's dark alter ego to life. Filled with authentic details that pay tribute to the iconic character, it’s a must-have for any Spider-Man or Marvel fan.Whether you're a fan of the Amazing Spider-Man, a Marvel enthusiast, or a passionate 3D printing exponent, swing over to makerworld.com to check out this impressive Symbiote Spider-Man design – a showpiece of 3D modelling prowess that allows you to hold a piece of pop culture in the palm of your hand.

花盆

玩具

灯

情人

儿童

无人机

海洋

汽车

龙蛋

打印一天以上

机器相关