fantastic model and profile. filets in the corners would be nice but would also takeaway from the speed and simplicity.

great also for cleaning out the nozzle between material changes.

one of my favorite 3d prints to date. Ended up printing again for family that saw them and asked for some.

Great model and profile. works with and without supports.

Very clean print

Very clean print. The smaller layer lines are needed to keep the point sharp.

Ended up editing it to cut off the caribeaner clip, duplicated and mirrored it, and joined it to make a double battery holder. Printed in PETG HF with brim ears. I’ll add it as a remix or print profile when I get the chance

Added dual sided numbers on the top. With PLA it had enough flex to be able to be bent to fit on wooden hanger rails. I had some haze on the top layer, but I believe that could be fixed by changing the purge ratio when going from such a light color to dark color, that isn’t an issue with the model or the profile.

Good quality print, and doesn’t require supports, but the fins are very loose meaning unless it’s wedged somewhere it will get pushed away. planning on printing one with a lip that wedged under the printer and/or magnets

tried to modify to English but wouldn’t print cleanly, have you considered flipping it so it prints facing down with only 1-2 layers for the cap fins? when I try to flip it it ends up printing in the air because of how it’s designed.

newer spools are too large to use in the ams even with the flat profile. ended up using the fs100 to tear off the sides and use printed spools. still a good design.

even printing with new petg and strength profile with extra walls it ended snapping after light use.

size didn’t work for me, but still a good design.

esun PLA+ Black and dark red.

Ended up using white and yellow as the base colors since I didn’t have any tan filament. Some gaps on the first layer, but that might be a slicer or my printer problem. Still very clean.

printed in the Bambu Lab PLA Basic Orange that came with the printer. Increased walls for added strength and rigidity. Printed in full-size and 80% print profile