mike cushing

kevr102

The amount of times I have needed a Circle Centre/Center Finder to be honest is not that many, but In the past I had a model makers lathe and I could of used something like this Centre/Center Finder, I'm thinking it could be used as a set square as well on the outer edge.I wanted a 1 piece component design, something which would print without support and this is the design I came up with.The slot to scribe has a chamfer so it can take a sharp pencil or fine point pen, there is even a hole to hang the finder on a wall.The model can be scaled in the slicer if you need a bigger version.Prints as on the preview face down with no support.Thanks for looking.

Mini Model Makers Circle Centre/Center Finder 

tool

PrecisionCrafts

Key Features:<ul><li>Easy Storage: With my Stick/Broom Wall Mount's compliant mechanism, I've made storing and accessing your tools a breeze. Simply slide your stick into the mount, and it securely locks in place. Taking your tools out is just as easy, ensuring a tidy space with minimal effort.</li><li>Versatile Compatibility: My wall mount is designed to accommodate various stick-like objects. To ensure a perfect fit, measure the diameter of your stick in millimeters. Then, divide that value by 28 and multiply by 100 to determine the right scaling percentage for printing. For example, if your stick has a diameter of 35 mm, you would scale the 3D model to 125% before printing to ensure it fits your stick accurately.</li><li>Printing Specifications: For optimal fit and grip, it is recommended to print this wall mount with no infill and no top and bottom layers. The strength of the grip is determined by the number of wall lines, and a value of 3 wall lines should provide a secure hold.</li><li>Simple Installation: Mounting my Stick/Broom Wall Mount is a straightforward process. Use strong double-sided tape to secure it to your wall. No need for additional hardware or tools.</li><li>Material Preference: To ensure durability, it is recommended to print this wall mount in PETG, but PLA should also do the trick.</li></ul>

Scalable Stick/Broom Wall Mount

house stuff

云端的风

适合tcg卡牌的展示支架，您也可以将其缩放以适用于支撑其他东西为了更好的使用强度在拼装完成后可以使用胶水进行加固一些情况下您可能需要对其进行打磨才可以顺利的拼装Display stand suitable for TCG cards, which can also be scaled to support other items.For better strength, you can use glue to reinforce it after assembly.In some cases, you may need to sand it for smooth assembly.

拼装卡牌展示支架 Card Display Stand Kit Card

work

RexVagabond

This is a 3231T53 Mason Jar adjusted for 3D printing. Works with regular mason jar lids.

3231T53 Mason Jar (adjusted for 3D printing)

hardware

RileyDesigns

This is snake scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. If there are any shapes you would specifically like I'd be happy to make them and upload it as a profile.&nbsp;MeasurementsEach side of the hexagon is 7mm in lengthDistance from center to center to link the chainmail together should be 13.25mm horizontally, and to get the second row of chainmail is over 6.625mm up 11.5mm. Do not reduce the distances lower than that or the scales will fuse together.

Snake Scale Hexagonal Chainmail - Print in place

fabric

JamesThePrinter

This organizer is intended for your desk or 3D printer organizational needs. It features a mid-century feel with 6 separated storage areas. The included drawer should be used, but is not a requirement. The drawer handle requires 2 M3x12 bolts and is comprised of 3 pieces:<ul><li>Handle Support - Print 2x</li><li>Handle - Print 1x</li></ul>&nbsp;Print SettingsA brim may help with the handle pieces, but it is not necessary. No other special settings are needed.&nbsp;Drawer Assembly Instructions<ul><li>Insert both bolts through the holes in the drawer. </li><li>Slide the Handle Supports over the bolts. The flat end should be against the drawer. </li><li>Carefully screw the bolts into the handle. DO NOT OVERTIGTHEN. Because the handle is so small, it will crack if you overtighten the bolts. This is especially true if you use a silk filament. </li><li>Be sure to orient the curved end of the Handle Support correctly so that it pairs with the profile of the Handle.</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/745895/2024-01-15_s740vq3lrdz5.png"></figure>&nbsp;&nbsp;<a href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Desert Tan PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li></ul>

Mid-Century Organizer

case idea

3DMN

For the best finish, I recommend gluing the sides together.&nbsp;Introducing the ultimate Star Destroyer Build Kit – a cutting-edge 3D printed marvel that brings the iconic spacecraft from a galaxy far, far away right to your fingertips! Unleash your inner engineer and embark on an epic DIY journey as you assemble this intricate replica, piece by piece.&nbsp;&nbsp;If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>

Star Wars Star Destroyer build kit 

toys

Bambu Lab

This is an Official Heatbed Cable Protector for the Bambu Lab A1 3D printer.To install, follow these easy steps:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/458892/2024-01-27_f2efaaf8fd686.gif"></figure><ol><li>Ensure proper alignment by verifying that the arrows on both halves are directed toward the cable root.</li><li>Securely fasten the two halves until a snug and flush connection is achieved.</li></ol>