user_3719179139

make 3D

- Coffee mug/drink can holder -&nbsp;I was tired of always having to be carefull to not spill my office, as I don't have much room on my desk.Therefore I designed this mug/can holder so I can keep my drinks safe!&nbsp;This is a fully 3D printed mug/can holder for most desk thicknesses. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.   I designed the holder so it can be printed without any support material. This way there should be no sides with lower quality finish. Resulting in a very nice print.&nbsp;If you don't have a AMS unit, the main body can be printed in on solid color and the screw an any other.&nbsp;The holder is designed to hold the most common size coffee mugs, drinking glasses and beverage cans.(Not tested with slim cans like Red Bull)&nbsp;<ul><li>The maximum diameter of a coffee mug is approximately 85 mm (The holder has a cutout for mugs with handles.)  </li><li>The maximum diameter of regular can is approximately 66 mm  </li><li>The holder fits any tabletop thickness between 15mm and 30 mm</li></ul>&nbsp;<figure class="image image_resized" style="width:72.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417767/2024-01-15_fe5501b980aad.png"></figure>Assembly is pretty straight forward.The two large parts are joined with a 90 degree twist lock. Please be aware that the twist lock might seem tight if your printer is not well calibrated or if you are using low quality filament with poor tolerances.&nbsp;Please have a look at the short video showing how to assembly if you are in doubt.<figure class="media"><div data-oembed-url="https://youtu.be/9RAvPbI11C0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9RAvPbI11C0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I have made two versions with different qoutes on top:“More Espresso Less Depresso” and “Drink Responsibly” If you do not want any text on top, simply re-color the part within Bambu Studio to be one solid color.<figure class="image image_resized" style="width:70.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417767/2024-01-15_9446cf9a2ade.jpg"></figure>&nbsp;My holders are printed with these filaments:Bambu Lab PLA Matte IvorySunlu PLA+ BlackBambu Lab PLA Basic OrangeBambu Lab PLA Basic Bambu GreenBambu Lab PLA Matte Yellow&nbsp;LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;<h4>Updated 17-01-2024: Added Print Profile V1.1 Increased the span of the opening to allow tapletops down to 10mm thickness.</h4>

"More Espresso, Less Depresso" Office desk mug holder

实用

jusutus

UPDATE 04.11.2023: Corrected a dimensioning error on the magnet holes. Apologies for the mistake! UPDATE 28.10.2023: Now prints without supports :)Also changed the magnet holes for hexagonal holes for easier printing and easier fitting of the magnets.Added a 4.1mm pocket for the bowden going to the toolhead for even better filament path alignment.&nbsp;---&nbsp;A smooth three way splitter for using an AMS, rear spool holder and a drybox / secondary spool holder together on a Bambu.Smooth transitions to prevent filament snagging. I printed mine in 0.12mm layer height, which is recommended for this part.Mine is in ASA but other materials should be fine as well. Prints beautifully in 1.5hrs and only takes around 10g of filament. ---&nbsp;BOM:&nbsp;-printed part-5pcs 6x3mm magnets-4pcs PC4-M10 pneumatic fittings (like <a target="_blank" href="https://www.amazon.com/BIQU-Straight-Pneumatic-Connector-Extruder/dp/B01IB81IHG" rel="nofollow noopener">these</a>, for example)&nbsp;Assembly:&nbsp;-insert magnets (use superglue if needed)-make sure a 4mm bowden tube fits the 4.1mm pocket on the bottom connection of the “Y”, test this before threading on the pneumatic fitting-thread the pneumatic fittings on-insert splitter on PTFE tube coming from the printhead-enjoy!&nbsp;Have fun printing!

实用

竹子mod