great print! I used the materials in the description and the worms came out perfect. I didn't use any Vaseline or anything in the mold prior to pouring and the worms came out pretty easily because the silicone is very strong. The description also says wait 8 hours for the cure but I've gotten away with waiting 2hours. I've already made 24 worms with no issues! I'll come back and share how I rig them once I've caught some bass and had experience in the water with them.

printed great! used 2 part silicone without an injector. I just poured the 2 part mix into the mold very slowly and tapped the mold hard with my finger until all the air bubbles came up

tolerances were a little tight I had to do some filing