user_3688995303

Pimp Your Printer project

iPad Pro 12.9 drawing / modeling stand.It's very sturdy and robust, it can be assembled very easily.

IPAD PRO 12.9 DRAWING STAND

ipad

Martin

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3x 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.&nbsp;Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.&nbsp;I designed this to fit on a small 3D printer, with a build area required of 170 x 170.&nbsp;At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.&nbsp;At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.&nbsp;Have fun growing!

Modular Hydroponics Tower

topraksız

tupsyvejle

A DJI MINI 3 pro controller keychain strapholder.

DJI MINI 3 pro controller keychain strapholder.

drone

ICant3DPrint

<h2>Summary</h2>Plastic Buckle design with the FDM 3d printing method in mind: 1. No support needed 2. Prints in only 30 minutes.Get similar models like it for free here: <a target="_blank" href="https://www.printables.com/@ICant3DPrint" rel="nofollow noopener">https://www.printables.com/@ICant3DPrint</a>This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind:No support is needed Prints in only 30 minutes Optimized print orientation for strength Designed to counter possible elephants&#39;s footThe outside dimensions of the model can be seen in the picture belowThe holes are 6mm x 11mm<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458031/design/2024-05-08_favp4dlsq962.png" alt="image">

Plastic Buckle (Zero supports)

tasma aparat

avi5

<div><h1>Summary</h1><div>hii i design a car universal diffuser...</div></div>

car universal diffuser

araba

TerTerro

Modular Outpost Terrain Can be mix and matched. Is designed for 28-32mm scale miniatures, just scale how you need it. Windows and doors are exchangeable, no supports needed.

Modular Outpost Terrain

diorama

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

honeycomb

Ruben3d

I just 3d scanned a head of a Ronaldo action figure, tried my best to clean it with meshmixer while maintaining quality.

Cristiano Ronaldo

figürler

3DMN

If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>&nbsp;&nbsp;Check out my other Hogwarts model: <a target="_blank" href="https://makerworld.com/en/models/134009#profileId-145435" rel="nofollow noopener">https://makerworld.com/en/models/134009#profileId-145435</a> &nbsp;&nbsp;Step into the enchanting world of Harry Potter with our meticulously crafted Hogwarts Castle model! This exquisite replica captures the magic of J.K. Rowling&#39;s wizarding world with precision and attention to detail, making it a must-have for every Potterhead.&nbsp;Standing at an impressive x200 y185 z104, this Hogwarts model is a true testament to the grandeur of the iconic wizarding school. Every turret, tower, and spire has been faithfully recreated, allowing you to bring the mystical charm of the castle into your own space.&nbsp;Whether you&#39;re a collector seeking the centerpiece of your Harry Potter memorabilia or a fan looking to add a touch of magic to your home, Immerse yourself in the wizarding realm and marvel at the intricacies of the magical world with this stunning representation.&nbsp;&nbsp;

Harry Potter Hogwarts

harry potter

Smart3d by Gabriel Gomes

god of war logo

god of war

Rago3D

Gandalf staff 

asa kılıc sopa

Wiseone

My 3D print model is based on an artificial cast of a Homo floresiensis cranium (LB-1), nicknamed the Hobbit, courtesy of Cornell University in Ithaca, New York. Model by Hannah Teush.&nbsp;I've taken Hannah's published model and converted it to a 3D printable file.&nbsp;From the paper describing this skull, LB-1 (https://www.pnas.org/doi/10.1073/pnas.0710041105#supplementary-materials) it lists the width of the skull (XCB) as 133 mm. You can find measurement definitions here: docs.coracore.org/en/latest/forensics-an...https://sketchfab.com/3d-models/homo-floresiensis-cranium-c3e58c699d3748a098df15bbd75f9e20&nbsp;Height: 106 cm (3 ft 6 in) - estimate from a female skeleton Weight: 30 kg (66 lbs) - estimate from a female skeleton&nbsp;Remains of one of the most recently discovered early human species, Homo floresiensis (nicknamed ‘Hobbit’), have so far only been found on the Island of Flores, Indonesia. The fossils of H. floresiensis date to between about 100,000 and 60,000 years ago, and stone tools made by this species date to between about 190,000 and 50,000 years old. H. floresiensis individuals stood approximately 3 feet 6 inches tall, had tiny brains, large teeth for their small size, shrugged-forward shoulders, no chins, receding foreheads, and relatively large feet due to their short legs. Despite their small body and brain size, H. floresiensis made and used stone tools, hunted small elephants and large rodents, coped with predators such as giant Komodo dragons, and may have used fire. &nbsp;My print is made in 1.75mm eSUN PLA+ Bone White filament, with 0.2mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. Print supports are required.&nbsp;I hope that you can find this print useful, too.&nbsp;Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

Homo Floresiensis Cranium (The Hobbit)

insan iskelet

Peter 3D print

I had the opportunity to scan the head of a Mouflon, so I took it and judge the result for yourself :)&nbsp;nastavenímateriál : PLA detail: 0,15perimetr: 2fill 10%

Mouflon Head

bust kafa

Squish3D

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.&nbsp;These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Nozzle: 0.4&nbsp;Filaments Used: PLA Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Aqua Blue Transmission Distance: 2.5 PLA Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #25 (2.08mm) swap to Blue Gray At layer #31 (2.56mm) swap to Aqua Blue At layer #32 (2.64mm) swap to White for the rest

SpiderMan Venom Symbiote - HueForge

HUEFORGE

Black Glovz

Wall Hanging Cat Decoration Simons cat

kedi

G__W__

Please consider casting your Boost token if this model/design helps you, and don&#39;t forget to press the like button. Many thanks!Makerworld has significantly reduced the download/print points awarded to designers. Instead, they have introduced the &#34;Boost&#34; token, which you can apply to models that may not be the most popular (already gaining points from downloads and prints), but are useful or meaningful to you in general. This supports and encourages us, the &#34;losers&#34; (those not focusing on popular themes like Star Wars, car keychains, countless airless balls, etc.), to create more useful or niche designs.&nbsp;Tube holders/racks are among the most common and abundant items in a laboratory environment. Reaction tubes come in different sizes and require specific holders. Here, I present racks/stands/holders to suit the most common applications in a biological laboratory in the format of Kit Cards. These designs feature materials friendly yet rigid and stable for assembly, easy printing &amp; assembly, and have been tested in actual biomedical labs.&nbsp;This page holds the model for a 6 x 10 microcentrifuge tube rack with numbering for columns and alphabets for rows. Supports were built into the bottom panel to reduce flex when closing the microcentrifuge tubes on the rack. It comes with two print profiles; both Part A and Part B have to be printed for complete assembly.&nbsp;Please visit the following separate models:15mL and 50mL Falcon tubes holder <a target="_blank" href="https://makerworld.com/en/models/251250" rel="nofollow noopener">https://makerworld.com/en/models/251250</a> PCR tubes holder <a target="_blank" href="https://makerworld.com/en/models/251190" rel="nofollow noopener">https://makerworld.com/en/models/251190</a> FACS tubes holder <a target="_blank" href="https://makerworld.com/en/models/251208" rel="nofollow noopener">https://makerworld.com/en/models/251208</a> Microcentrifuge/Eppendorf tubes holder <a target="_blank" href="https://makerworld.com/en/models/251179" rel="nofollow noopener">https://makerworld.com/en/models/251179</a> Cryotubes holder <a target="_blank" href="https://makerworld.com/en/models/251198" rel="nofollow noopener">https://makerworld.com/en/models/251198</a> Microscope slides holder <a target="_blank" href="https://makerworld.com/en/models/251280" rel="nofollow noopener">https://makerworld.com/en/models/251280</a>&nbsp;These models are published separately to:1. Avoid clutter 2. Facilitate easy searching for the correct items 3. Allow convenient potential updates and troubleshooting.After all, laboratory vessels come in different sizes and variations, so minor adjustments might be needed for individual cases. Just let me know in the comments, and I will try to resolve them.&nbsp;Background:Microcentrifuge tubes (Eppendorf tubes) are small plastic tubes commonly used in laboratory settings for holding and centrifuging small volumes of liquids. They are typically made of polypropylene and come in various sizes, ranging from 0.5 mL to 2.0 mL. Eppendorf tubes are designed with conical bottoms to facilitate easy pelleting of samples during centrifugation. They often feature snap-cap or screw-cap closures to securely seal the tubes and prevent leakage. Eppendorf tubes are widely used in molecular biology, biochemistry, and microbiology laboratories for a variety of applications, including sample storage, DNA/RNA isolation, PCR, and protein purification.&nbsp;Assembly: Simply slot the support pillars into the panels. It should be easier than assembling IKEA furniture, and anyone smart enough to be in a lab should have no problem assembling them.

Microcentrifuge tube rack kit card

orancity

GiskardReventlov

A PET bottle organizer/dispenser for Ikea Kallax.&nbsp;I tested with 500ml bottles and it could hold 6 bottles in total with no sagging (3KG total) without using any glue.Print settings: 2 walls, 15% grid infill. Printed standing:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/206247/2023-11-26_46148901be526.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/206247/2023-11-26_6746ce2d478e.jpg">&nbsp;If you need it to be stronger, put a drop of superglue after assembling so the two frames won't move. 3 walls may also help for heavier bottles.&nbsp;STEP file included.

PET bottle storage for IKEA Kallax - No support, no glue, no screws required: only print and connect

lancelotcv

Split for easier printing&nbsp;Author: <a target="_blank" href="https://www.thingiverse.com/beeub/designs" rel="nofollow noopener">https://www.thingiverse.com/beeub/designs</a>&nbsp;Source: https://www.thingiverse.com/thing:6360708

Deinonychus (Raptor) skull

iskelet

DE3D

Table coffee cup holder

coffee

3DPrintsMom

<h2>Noble Guardian: A German Shepard&#39;s Silhouette</h2>Elevate your environment with the German Shepherd Silhouette, a symbol of courage and loyalty.Its commanding presence enhances any space with a sense of robust protection.&nbsp;Ideal as impactful wall art, a meaningful desk ornament, or a bold centerpiece, it honors the German Shepherd&#39;s heroic spirit, intelligence, and unwavering devotion.&nbsp;Could be scaled to larger sizes.&nbsp;If you&#39;re a dog lover, be sure to take a look at my collection of 10 Noble Dog Silhouettes - <a target="_blank" href="https://makerworld.com/en/models/453096#profileId-360379" rel="nofollow noopener">https://makerworld.com/en/models/453096#profileId-360379</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093032/design/2024-05-21_be1bacb21f3e9.png"></figure>&nbsp;&nbsp;If you enjoy my models and would like to support my work, you can <a target="_blank" href="https://buymeacoffee.com/3dprintsmom" rel="nofollow noopener">Buy Me a Coffee</a>. &nbsp;Happy printing! 😊&nbsp;&nbsp;

German Shepard's Dog Silhouette

köpek

VEK_3D

*ATTACHED IS A LINK DIRECTLY TO THE FILES IN STL FORMATIronman Mark 46/47 Helmet 3D Printable Model. This was modeled using CGI reference for great exterior accuracy.These 3D models have been been test printed before uploading in order to ensure 100% quality guarantee.There is a custom license included with the file that is subject to change if necessary. I'd love to see what you make so feel free to share the finished product with me&nbsp;Uses 10mm by 2mm magnets