McFalcon

Techro3D

Classic bird feeder | octagonal house | with mounting bracket| By Techro3D&nbsp;<ul><li>Water drainage.</li><li>Mounting bracket.</li><li>Suspension point for a fatball or other bird food.</li><li>Bottom also suitable for placing food.</li><li>Removable roof.</li><li>100% printable.</li><li>No glue required, but can be used just to be sure.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_a142276d19e56.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_bf6862079a949.png"></figure>

Classic bird feeder, octagonal house.

Garden

G__W__

<img src="https://makerworld.bblmw.com/makerworld/draft/273322/2023-11-19_d32951fd8f448.jpeg">&nbsp;Populate your Christmas town with these town houses and light them up with LED tealights candle. They are easy print without needing of support. &nbsp;<img src="https://m.media-amazon.com/images/I/61wT910maPL._AC_UF1000,1000_QL80_.jpg">&nbsp;Compatible with these model:&nbsp;Other town house:<a target="_blank" href="https://makerworld.com/en/models/62194#profileId-64710" rel="nofollow noopener">https://makerworld.com/en/models/62194#profileId-64710</a>&nbsp;Lighthouse:<a target="_blank" href="https://makerworld.com/en/models/64615#profileId-67795" rel="nofollow noopener">https://makerworld.com/en/models/64615#profileId-67795</a>&nbsp;Apartment/flat building:<a target="_blank" href="https://makerworld.com/en/models/58144#profileId-59867" rel="nofollow noopener">https://makerworld.com/en/models/58144#profileId-59867</a>&nbsp;Tiny round hut:<a target="_blank" href="https://makerworld.com/en/models/58143#profileId-59866" rel="nofollow noopener">https://makerworld.com/en/models/58143#profileId-59866</a>&nbsp;Take a loot at my Dutch house silhouette model for Christmas decoration as well:<a target="_blank" href="https://makerworld.com/en/models/65502#profileId-68861" rel="nofollow noopener">https://makerworld.com/en/models/65502#profileId-68861</a>&nbsp;Fed up with people grabbing your cup at parties? Bring this 'Don't Touch My Cup Sleeve' to your next gathering. Available for two cup sizes: 200 mL and 16 oz. <a target="_blank" href="https://makerworld.com/en/models/88671#profileId-94918" rel="nofollow noopener">https://makerworld.com/en/models/88671#profileId-94918</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/273322/2023-12-14_67ef147a5ca9a.gif"></figure>&nbsp;See also these adorable Christmas creatures <a target="_blank" href="https://makerworld.com/en/models/80897#profileId-86047" rel="nofollow noopener">https://makerworld.com/en/models/80897#profileId-86047</a>, and their cousins the Hygro and thermometer creatures <a target="_blank" href="https://makerworld.com/en/models/92474#profileId-98895" rel="nofollow noopener">https://makerworld.com/en/models/92474#profileId-98895</a>They are fast print suitable for last minute gift.<img src="https://makerworld.bblmw.com/makerworld/draft/273322/2023-12-14_fcfcb790e534.webp">The Tealight creatures are having a cosplay party with their cousins. One is dressed in a Pikachu costume (<a target="_blank" href="https://makerworld.com/en/models/98975#profileId-105544" rel="nofollow noopener">https://makerworld.com/en/models/98975#profileId-105544</a>), his canine pal and their feline cousin were truly amazed!<img src="https://makerworld.bblmw.com/makerworld/draft/273322/2023-12-19_7bda881ab43ba.jpg">&nbsp;&nbsp;Tealight Christmas tree ornaments:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/273322/2023-11-30_115363ff7d9a6.jpg">&nbsp;Earth ball <a target="_blank" href="https://makerworld.com/en/models/75790#profileId-80372" rel="nofollow noopener">https://makerworld.com/en/models/75790#profileId-80372</a> Moon ball <a target="_blank" href="https://makerworld.com/en/models/73489#profileId-77938" rel="nofollow noopener">https://makerworld.com/en/models/73489#profileId-77938</a> Cage ball type 1 <a target="_blank" href="https://makerworld.com/en/models/73497#profileId-77946" rel="nofollow noopener">https://makerworld.com/en/models/73497#profileId-77946</a> Cage ball type 2 <a target="_blank" href="https://makerworld.com/en/models/75735#profileId-80287" rel="nofollow noopener">https://makerworld.com/en/models/75735#profileId-80287</a> Cage ball type 3 <a target="_blank" href="https://makerworld.com/en/models/75710#profileId-80256" rel="nofollow noopener">https://makerworld.com/en/models/75710#profileId-80256</a> Voronoi ball <a target="_blank" href="https://makerworld.com/en/models/73508#profileId-77952" rel="nofollow noopener">https://makerworld.com/en/models/73508#profileId-77952</a> Spiral ball <a target="_blank" href="https://makerworld.com/en/models/73503#profileId-77950" rel="nofollow noopener">https://makerworld.com/en/models/73503#profileId-77950</a> and of course the plain ball <a target="_blank" href="https://makerworld.com/en/models/73472#profileId-77924" rel="nofollow noopener">https://makerworld.com/en/models/73472#profileId-77924</a>&nbsp;Tea light LED candle Light box modeled by my 11 years old:<img src="https://makerworld.bblmw.com/makerworld/draft/273322/2023-11-21_96628670698bc.jpg"> Christmas tree light box <a target="_blank" href="https://makerworld.com/en/models/70245#profileId-74580" rel="nofollow noopener">https://makerworld.com/en/models/70245#profileId-74580</a> Christmas 5 point star light box <a target="_blank" href="https://makerworld.com/en/models/70232#profileId-74556" rel="nofollow noopener">https://makerworld.com/en/models/70232#profileId-74556</a> Christmas 8 point star / snow flake light box <a target="_blank" href="https://makerworld.com/en/models/70214#profileId-74525" rel="nofollow noopener">https://makerworld.com/en/models/70214#profileId-74525</a>&nbsp;My 11-year-old's Christmas ornament, her very first 3D model created with Tinkercad. <a target="_blank" href="https://makerworld.com/en/models/58172#profileId-59905" rel="nofollow noopener">https://makerworld.com/en/models/58172#profileId-59905</a>&nbsp;Snow Sleigh card <a target="_blank" href="https://makerworld.com/en/models/58161#profileId-59892" rel="nofollow noopener">https://makerworld.com/en/models/58161#profileId-59892</a>&nbsp;***Ensure a safety by opting for LED candles or similar alternatives, and avoid real candles with flames around 3D printed parts.&nbsp;&nbsp;

Christmas Series : Christmas town houses (no support)

Christmas

ABDELat

You have an Ikea Samla Box but want to put several things inside without them mixing? With this simple model, you can do just that!&nbsp;The divider is designed in such a way that you can also put things on just one side without it tipping over. The clip with the partition can withstand vibrations, such as during transportation. This design is for the 5L Box!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000180354/design/2024-02-09_8541abaa392c.webp"></figure>&nbsp;The installation is also very simple and quick, and the best part is that the lid fits on it effortlessly.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000180354/design/2024-02-09_f75c397749a3.webp"></figure><h3>Print-Settings</h3>Material: PLA, PETG,… (as you wish)Layer hight: 0.2mm will do the job. Inflill: 10-20% is enough. If you want it to be a bit heavy go for 100%Support: noBrim: yes if you print the the clips Layer by Layer, no if you print it object by object&nbsp;In the uploaded profile, I used for the Clips object by object. Depending on how clean your nozzle is, the type of filament you use, and the print bed you have, the clips may come off. Printing with the &#34;Object by Object&#34; setting works quite well in preventing this issue. If you`re using a X1C, I recommend to disable the option “First Layer Inspection” for the clip. You can do so directly in Bambu Studio (Device Tab):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000180354/design/2024-02-09_1fd84b7a9a9a.jpg"></figure><h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the download button). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.

Clip-in Ikea Samla divider 5L

Workshop

alejandromshimano

This is a cute penguin stand that you can use to hold your glasses, or just for decoration.To assemble, you just need to glue the feet to the backside so it doesn't tip over.The glasses used in the photos are 14cm (5.5") wide, so if yours are smaller or bigger you can scale the model accordingly: 80%:10-11cm (3.9"-4.33") 90%: 11.5-12.5cm (4.5"-4.9") 110%: 14.5-15.5cm (5.7"-6.1") 120%: 16-17cm (6.3"-6.7")The model in the photos was handpainted since I don't have an AMS yet, but multi-color printing is reccommended if you have one!

Penguin glasses stand

Office

Quantum.Grower

My wife was tired of dealing with the stock “sticker cover” that comes on the Comet Cleanser cans. After the first use, the powder gets stuck to the sticker and no longer seals the can. I designed this Comet Cleanser Cover and printed it in TPU to solve that problem. It seals the Comet Cleanser nice and tight now. No more messy spills on the floor or under the sink when trying to store the can. &nbsp;&nbsp;Tip: If your significant other is not a huge fan of 3D printing, print one of these and it may give them a new appreciation for your 3D printing hobby! (It worked for me 😂)

Comet Powdered Cleanser TPU Cover

kitchen

Mick23

This is a holder for 6 rolls of the dyno letratag on a skadis ikea board.If you want other amount of roll holder let me know.And please if you like it, share it and like it if you want.and also rate it, and follow me.Have a nice print day.Look also at my other items

skadis dymo letratage

Tools

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;

Tetra Balance Game

Gaming

Wojciech Kawa

A Minion on the front of the extruder that rolls one eye while printing.Minion on the front of the extruder&nbsp;Please use my profile for printing as I spent some time on it to make sure the print turns out as good as possible. Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know. If you have printed it, please leave a rating. Before installation, the original front and the rotating element must be dismantled. During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper. When assembling, make sure that the top latches are flush with the top edge before pressing from the front.  If you think that standard hooks are too weak and may break, print a version with reinforced fasteners. You will see details in the photos below.  <figure class="image"><a href="https://www.buymeacoffee.com/wojciechkawa" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2024-01-30_46d010488f47e.webp"></a></figure><a target="_blank" href="https://makerworld.com/it/u/3316073328" rel="nofollow noopener">See my other projects.</a>&nbsp;Assembly instructions below. (same as Funy Face)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2023-12-27_739987a587726.jpg"></figure><h3>Version with strong top fasteners.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2023-12-30_15abccd4d578e.png"></figure>

Minion on the front of the extruder.

Bambu Accessories 

bimmerfreak10

Edit 5/25/24: Uploaded print profile for arrow model and added a smooth/no texture model to the downloads section. &nbsp;Edit 1.013: I&#39;ve had several inquiries about commercial licensing of this model. The only reason I didn&#39;t go public domain with it in the first place is I didn&#39;t want to be a target for people with similar models. &nbsp;However I know that I designed this myself, included the STEP file to prove it, and it&#39;s already public due to me designing it on a free Onshape account. Also there are models now you can find that even copied the outer texture of the clock shop model I was worried about. &nbsp;All that to say I&#39;m releasing this public domain. Feel free to sell these in your shop. &nbsp;I&#39;m honored that this model has been recieved so well. I expected less than 100 downloads and the count is well into 3k and goes up all the time. I love that people are enjoying this as much as my wife and people in my life have. I do well financially, so paying me for the use of this model is silly to me. If you feel an obligation or some kind of guilt, I suggest giving a small amount to a local animal shelter or autism awareness center in your area. That would mean far more to me than collecting on this. But even that is not required. &nbsp;Thank you for the wonderful comments and pictures, it&#39;s awesome to see this fidget in so many colors. Enjoy!&nbsp;Edit: updated with increased tolerances. It was a bit tight for regular pla, but worked well with silk. Also added a different outer texture that I personally prefer. Easier to hold on to but may not be as comfortable for some.&nbsp;Another fidget spinner. This one is inspired by the ones sold on the clock app. Couldn&#39;t find a smooth spinning one to print, so I made one in onshape. Spins far better than most of the ones from printables.&nbsp;My best results came from printing .16 layer height, 3 walls and 50% infill to give it some weight, but YMMV.&nbsp;Step files included, in case someone wanted to make a different outer texture and re-upload.&nbsp;Have fun!