user_3643355952

Vixvvo 3D

Patreon commercial licenses will be accessible through my Patreon page, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated! (edited)&nbsp;&nbsp;Keychain Display Carousel&nbsp;I created this rotating keychain display. It's sturdy and requires no glue or additional support. If you prefer a taller display, just extend the middle rod or you can request it, i will be happy to make you a different sized extension. It rotates smoothly and remains stable without tipping over. You can stack layers as high as you want and adjust the rod height accordingly!&nbsp;<ul><li>Plate 1 - Screw Cover, Keychain Hook, Long Extension, Divider</li><li>Plate 2 - Top Octagon</li><li>Plate 3 - Carousel Stand</li></ul>&nbsp;&nbsp;

Keychain Display Carousel

display

OwenTF

This is my print in place fidget ring design. The concave inner ring keeps the convex outer ring in alignment and allows it to spin freely without any assembly need. I have included a section view of this geometry below. If you enjoy the design a like or make would be appreciated.&nbsp;Check out my new Banana Switchblade <a target="_blank" href="https://makerworld.com/en/models/480959#profileId-392609" rel="nofollow noopener">here.</a>You can obtain a commercial license to sell prints of this <a target="_blank" href="https://www.printables.com/@OwenTF_1791221#join:894" rel="nofollow noopener">here</a>.<figure class="image image_resized" style="width: 35.97%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000237319/design/2024-03-05_1db0d25e10fdc.png"></figure>Instructions<ul><li>Estimate your finger diameter then select the ring with the corresponding inner diameter.</li><li>The ring prints in place and no assembly is required.</li><li>I recommend printing with an outer brim.</li><li>The gap between the two rings is 0.25mm. If this gap is too small for your printer, scale up the outer ring in the x and y direction until the inner and outer ring no longer fuse together.</li><li>Adding some generic plastic lubricant significantly reduces friction and allows the ring to spin for much longer.</li></ul>

Print in Place Fidget Ring (21 Different Sizes)

ring replacements 

iprintshit

The Cornhole Caddy by Nofsky IndustriesProtect your backyard essentials with the Cornhole Caddy, A modular stand with adjustable height! The Cornhole Caddy is perfect for those nights in the backyard or on camping trips! It can be taken down  for storage and elongated for the most optimal spot! Hold 2 brews and your phone (plus more!) comfortably wherever you set up camp!&nbsp;Everything can fit on a single printbed (256x256x256) to make printing easy. The printed threads make for a painless tool free install! More parts coming in future updates! Download your own Cornhole Caddy today!&nbsp;Update 3-31-24<ul><li>Added Baseplate for flat surfaces! (new print profile and raw stl available)</li></ul>Update 4-4-24<ul><li>Fixed thread clearance issue on all parts.</li></ul>

The Cornhole Caddy

corn hole caddie

kekreations95

Prints with no supports or assembly.All Kekreations designs are under Copyright and you may not sell any digital files or prints of my designs. If you are interested in obtaining the rights to sell commercially, you can join the Patreon [HERE](https://www.patreon.com/Kekreations3D) Check out my socials to keep up with other designs in the works! [Instagram](https://www.instagram.com/kekreationsart/) [Tiktok](https://www.tiktok.com/@kekreationsart) [Facebook](https://www.facebook.com/kekreationsart) [Youtube](https://www.youtube.com/channel/UCz5aaSy-DlRZ7P6W_7WUVxg)&nbsp;Feel free to tag me or DM me on any socials if you post photos, I would love to see them! &lt;3 Print recommendations:<ul><li>2-4 walls</li><li>10-20% infill</li><li>Add brim if you have adhesion issues</li><li>Prints best at 100% size+, but depending on your printer it may do well down to 75% size as well!</li></ul>

Flexi Wolf, Articulated Wolf

animals

LongBeachRaider

This is my go to fidget spinner and I have an entire bowl of them! Prints fast and clean. Can be used in just one hand, which is really the key with a good fidget toy. Being able to use the mouse while fidgeting is really the gold standard. ENJOY!

Gear Fidget Spinner

fidget spinner

GianfLab

Nissan GTR R34 desk decorationDimensions: 20.5 x 6.5 x 5.5 cm 8.1 x 2.6 x 2.2 inch (length, height, depth)&nbsp;Print Settings:Use standard setting .20mm Layers + Only one wall on first layerNo Supports

Nissan Skyline GTR R34

VEK_3D

*ATTACHED IS A LINK DIRECTLY TO THE FILES IN STL FORMATIronman Mark 46/47 Helmet 3D Printable Model. This was modeled using CGI reference for great exterior accuracy.These 3D models have been been test printed before uploading in order to ensure 100% quality guarantee.There is a custom license included with the file that is subject to change if necessary. I'd love to see what you make so feel free to share the finished product with me&nbsp;Uses 10mm by 2mm magnets

VEK3D Iron Man MK 46 Helmet

iron man

Martin Kozak

<h3>Model</h3><ul><li>Model is 45 cm long, consists of 70 pieces and needs 720 g of PLA filament. Total print time is about 30 hours.</li><li>Biggest part is 214 x 118 mm and does not fit A1 mini build plate.</li></ul><h3>Postprocessing</h3><ul><li>Remove supports.</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/469116/2023-12-30_7f665c461fbba.jpg"></figure>&nbsp;<h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li><li><a target="_blank" href="https://makerworld.com/en/models/146718#profileId-159991" rel="nofollow noopener">https://makerworld.com/en/models/146718#profileId-159991</a></li></ul>

Helicopter 300 %

Isaiah

Maty505

third version of my articulated crystal dragon.  shorter body and longer tail. body parts are also improved. the model is prescaled and i wouldnt recommend to scale down, i tried smaller, as shown on the photos and it was still pretty good, but for better quality dont scale down.

Articulated Crystal Dragon

dragon

Make sure you download both Drawers 3 (3-4) And 4 (3-4)!! I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features many separate drawers for organization! drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!&nbsp;All Commercial License, Will be available on my Patreon "Vixvvo3D" For a Low Price of 6$/Month. (currently trying to post & model 1/Weeks) <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a>&nbsp;

Big UnderDesk Drawer Organizer

drawers

KYZ Design

Originally posted <a target="_blank" href="https://www.printables.com/model/463601-hsw-feet-for-freestanding-walls-honeycomb-storage-" rel="nofollow noopener">here</a>, check it out to see past makes and comments&nbsp;These feet use the Ez-V1 series clip and therefore require no screws, are designed for easy printing, and print in the strongest direction.This will work with standard HSW wall pieces but if you are just having 1 piece, see this for <a target="_blank" href="https://makerworld.com/en/models/26738#profileId-26811" rel="nofollow noopener">single wall pieces with integrated frames</a>.&nbsp;If you print the feet with a fibre filled material (I used CF-ASA) and use it with one of the 10mm thick “HD” wall pieces as shown in the pic (which I printed in ABS+), it will be a very tight fit, but will not wobble and be quite secure.&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.

HSW Feet for Freestanding Walls - Honeycomb Storage Wall

HONEYCOMB / HSW

bayfaire

Made a multi-color .3mf for a Katana Keycap. Works on Cherry MX Keyboards and was made for the back-space key.&nbsp;Let me know how your prints go for this one as its a bit more tricky to print then my regular keycaps!&nbsp;Commercial License available on my Patreon for selling any of my designs including this one + exclusive Patreon STL models. Link is below.<a target="_blank" href="https://www.patreon.com/Bayfaire" rel="nofollow noopener">https://www.patreon.com/Bayfaire</a>Works great for both FDM printers and Resin Printers.

Katana Sword Cherry MX Backspace Keycap

not needed, possible prints

K-Studio.ca

Side Handles for the AMS unit.<ul><li>Easier to carry the AMS unit without digging fingers under the plastic ledge.</li><li>Move the AMS unit off the printer with ease for the maintenance.</li><li>Print in PLA, no support needed.</li></ul><h2>Updated - March 22, 2024</h2>Thank you for the feedback, I found out there are different revision of the AMS; either new or old - one has 5 sections and 3 sections. I will add a new model soon for the 5 sections. Your feedback is critical since there is no way for me to acquired different AMS models.<h4>Release 1.1 for 3 Sections</h4><ul><li>1.1 model is to accommodate two versions of the 3 sections AMS. If the original 1.0 works for you, there is no need to reprint. Again, thank you for the feedback. Please let me know if there are any issues.</li><li>Long inner channel is tapered 1 degree, if the handle is loose - you can add masking tape or electrical tape in the channel to add thickness.</li></ul><h4>Beta 1.0 for 5 Sections</h4><ul><li>5 Section version is in Beta 1.0, please try to print one handle for test fit first.</li></ul><h4>AMS Versions</h4>The newer model of the AMS will have 3 sections and the older model has the 5 sections. Please download the correct print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/749759/2024-03-20_854c76cf09513.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/749759/2024-03-20_3e706994b16cb.png"></figure><h4>Installation</h4><ul><li>Please make sure both handles are snugly fit into the AMS plastic ledge.</li><li>If not fit in properly, it will have an uneven surface.</li></ul><h4>Feedbacks</h4>Please provide feedbacks if there are fitting issues; I will revise the model if any. Please also note that untuned filaments may cause fitting issues. Model in photo is printed with Bambu PLA Basic.

AMS Side Handles

respool or spool / AMS

Dingus Dude

I was cleaning out my printer of little filament bits and strings and looked in these holes and they were almost filled! I whipped this little cover up to prevent this in the future. Have a look at your printer, do you have filament bit build up too?&nbsp;I tested this with ABS, ASA, PETG and PLA.

X1C Rear Holes Cover

Printer only accessories

sipura

Hello everyone,&nbsp;There were many requests after the XL case to make an even bigger model if possible, and here we present it to you.XXL version of our modular cases.&nbsp;The internal width and length dimensions are the same as on the XL case, except that on this case there are 3 rows of internal containers.&nbsp;Inner dimensions are 194x168,5mm and height 145,2mm.&nbsp;<figure class="image image_resized" style="width:61.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812520/2024-03-17_195c783aa09e4.png"></figure>Big advantage is that the inner boxes are compatible with those of the smaller models Simple print, for handle you need support.All parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;The inner containers are made to fit tightly inside, if you want more space I recommend to reduce the model of the inner boxes a bit.&nbsp;Recommend: Dropp the inserts to a scale of 98% just makes them easier to get in and out of the box&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x32mm3pcs of screws M3x20mm&nbsp;For assemble handle you need:2pcs of screws M5x32mm2pcs M5 nuts&nbsp;I hope you like it, and enjoy printing and using this useful case.Feel free to put your pictures of printed models in comments. :D Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio. Enjoy printing

Utility XXL - case

storage box

ozarkexpeditions

<h2>Minimal &amp; Modular Steering Wheel Mount for Phones, Tablets, and More</h2>Transform your car&#39;s steering wheel into an entertainment center for your lunch break, kid pick up line, or anytime you&#39;re just hanging out in your vehicle. This device has been designed with simplicity and modularity in mind so that you don&#39;t have to print anything too complex to have a phone mount for your lunch breaks in your car. This is designed to fit over most steering wheels and is versatile by allowing you to select the exact height you would like to have your phone or tablet displayed. The design works well for both vertical and horizontal viewing. Features<ul><li>10x3 hex layout for a modular layout that fits you need. </li><li>3 peg sizes that will work with any size phone or tablet. </li><li>Easy and relatively quick print.</li><li>Slim design for easy storage in the side of a car door. </li><li>Modular design enables future add-ons, similar to the mini whiteboard holder and condiment tray that are experimental features. </li></ul>Ideal For:<ul><li>Folks who take their breaks in their car.</li><li>Travelers and road-trippers needing organized access to devices and snacks while taking a break.</li><li>Anyone looking to make the most out of limited space in their vehicle.</li></ul><h4>Printing Considerations</h4><ul><li>Once you print the base piece, you can decide which pegs or accessories you would like to print. Because they are small, you may want to print all of the pegs to see what works best for you. </li><li>I printed in PLA+ which tends to work well enough for me in car applications, but if you park your car in hot environments, consider printing in ASA, PETG, or other high temperature filaments. </li></ul><h4>Assembly</h4>Once you print the base unit and the pegs you would like to use, then place the peg through the backside of the base at the desired placement. You will need to push with a little bit of force as there is a snug fit to ensure it does not fall out during use. Simply hang this on your steering wheel the next time you are parked and want some entertainment. &nbsp;Beta Features<ul><li>While this is designed primarily for phone and tablets, there are a few additional items that can be printed in this profile, like a credit card size holder that I use for writing notes or a little experimental condiment tray. For the mini-whiteboards I use this <a target="_blank" href="https://www.amazon.com/Premium-CAETOUNG-Graphic-Quality-Printers/dp/B0B8CQ5LJW/ref=sr_1_5?crid=28QLM8DVA3HX3&amp;dib=eyJ2IjoiMSJ9.g5deP0eyxu8wAO1yPIASpEx_gyYN9pOYH3knOV4wzvTqNvTM--xOMPH9q9AXLfwAZo-v2esG8gaK60aifPnxnZhw_zGlaLkR8dG8cZ8uH5Ji0zo-vcxAd3OPVECJ6uB8s7iVnGmbO-Fjnxi3lXbL6q1q0Bftx8iRipvyN5H8E1xQg0tOWYZHto-seDvOfTRSIeC2oPr9sn5RnG6xpaRhu4XtKBz_VnUvrSXbZmwgXH1m2q_Nek10u-c6wFjSKzbn5HOuMQaDx3-j2ttK8zzQgV3Kbah39_Z0JUDuhJSNyew.plfxUZbQ2lHQ8h7epnbqcV04964plNPDzak51LoL0Kk&amp;dib_tag=se&amp;keywords=blank%2Bhotel%2Bcard&amp;qid=1713064669&amp;sprefix=blank%2Bhotel%2Bcard%2Caps%2C106&amp;sr=8-5&amp;th=1" rel="nofollow noopener">card</a> on amazon. </li><li>What other add-ons would you like to see created? </li></ul>&nbsp;⚠️ Please do not use this device while driving. It is intended to only be used while parked. ⚠️

Modular Steering Wheel Mount Phones and Tablets

car mounts

Scattered Collectables

The New and improved version of my printable Brembo coaster set, which i originally designed in June 2022for rights to sell prints visit https://www.patreon.com/ScatteredCollectables&nbsp;- Improved overhangs for better print quality- Better fitment of the coasters so they don't lean- A more accurate logo- Added drain holes for any liquid to escape- New Coaster piece with no hole, as requestedAssembly is easy, just print all of the pieces, and glue the 4 printable bolts into the holes, or use M4 bolts for a more authentic look.&nbsp;I have also added STL files for a Caliper which is blank, and two separate logos which can be printed in multicolour if you wish to make the Brembo words a different colour like seen here in this picture below<img src="https://makerworld.bblmw.com/makerworld/draft/467410/2023-11-11_1411f2cae5a36.png">

Brembo Coaster Set *Improved* 

coasters

Kubikossi

The Vac-Boy is a print-in-place vacuum packing helper for filament vacuum bags. It makes it easier to seal the double zipper. And it serves as a base for the vacuum pump.&nbsp;&nbsp;Der Vac-Boy ist ein print-in-place Vakuumier-Helfer für Filament Vakuumbeute. Damit lässt sich leichter der Doppelzipper verschließen. Und er dient als Unterlage für die Vakuumpumpe.