user_3635654115

Cloudy Nostalgia

How to support me!If you like my work, consider joining my Patreon where you can have a say in what I print next! Only Patreon members get to see those items and you can even sell them at a certain tier. Finally, if you’d like to learn my tips and tricks for making a hueforge start to finish I offer a coaching session to some of my patreons! Thank you for all your support!<a target="_blank" href="http://www.patreon.com/CloudyNostalgia" rel="nofollow noopener">www.patreon.com/CloudyNostalgia</a>&nbsp;Also, if you have any questions about how to print a piece of mine or if you need help troubleshooting, feel free to join my discord server where you can ask for help!<a target="_blank" href="https://discord.gg/4ays78UJ" rel="nofollow noopener">https://discord.gg/4ays78UJ</a>&nbsp;Also, I upload videos every so often showing how to videos for Hueforge. If you’d like to view here is the link:<a target="_blank" href="https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw" rel="nofollow noopener">https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw</a>&nbsp;**IMPORTANT INFORMATION**<ul><li>You cannot adjust the z scaling on any hueforge. This will mess with the coloring done and your hueforge will not come out as intended. You can however change the x and y to scale the picture. I recommend only changing by the same percentage. </li><li>To get an accurate print as shown in the photos you MUST use the same filaments listed below. You can change brands (as long as they are similar) but keep the filament colors the same. If you use any other color, you will not get the same results as me. </li><li>What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!</li></ul>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 3.5Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Blue Gray At layer #19 (1.6mm) swap to Silver At layer #20 (1.68mm) swap to Jade White for the rest.

Hueforge - Star Wars - AT-AT Walker

star wars

Jackmnb

Fits shotguns with a 1in Barrel and a .83in mag tube with a .25in gap between the two.Since print will be clamping the barrel, this needs to be some type of heat resistant filamentlike ABS,ASA,CF-PA,GF-PA, or PC.&nbsp;Uses -2x M5x30 socket head screws -2x M5 Square nuts (8mm x 4mm).  &nbsp;Amazon link in README. I suggest using loctite for screws&nbsp;I recommend you print all my files with 100% infill.

Shotgun Picatinny Rail Mount

adrain

IXPatch

This is a Pikachu sculpture based on its original artwork on the cover of the (western version of) Pokémon Yellow Version. It's so chubby! And much cuter than the modern slender version, imo. I was actually very surprised when I noticed that there are no “fat Pikachu" models, so I decided to change that.In addition to the regular single-color version, I have also included a painted multicolor version for Bambu Studio.

Retro Pikachu - Pokémon Yellow Version Artwork

figures

bowser

House model from Animal Crossing New Horizons.&nbsp;Colors used,Bambu White PLABambu Black PLABambu Gray PLABambu Bronze PLAParamount Terra Cotta PLA

Animal Crossing House

jess

user_1570472272

可以打印出来放大部分1/144的模型

1/144格纳库

gundam

Encrust3d

Golden snitch and mount from Harry Potter. Remixed to repair snitch and fix wings to lay flat when printing with minimal overhangs and add a stand to the print.

Golden Snitch from Harry Potter

4j&y

Cosmic Forge

AS A THANK YOU WE RELEASED THE P4 SENATOR ON MAKERWORLD FOR FREE! <a target="_blank" href="https://makerworld.com/en/models/400908#profileId-303140" rel="nofollow noopener">Helldivers 2 P4 Senator Revolver Prop by Cosmic Forge - MakerWorld</a>&nbsp;V2 is out, scale was too small. Upscaled with tolerances compensatedHelldivers 2 is a massively popular game right now, I thought I would model some weapons from the game.This is the G6 frag grenade. It has a screw function so you can store whatever you want in there making it perfect for cosplays and the such.&nbsp;I have recommended print orentations on each files description. USE A KEYRING FOR THE RING as it is non-functional.&nbsp;I offer guns and other models on my cults and etsy pages. I will be working through a lot of the guns and post them there.I intend to post more grenades here. <a target="_blank" href="https://cults3d.com/en/users/theforgingcosmic/3d-models" rel="nofollow noopener">All the 3D models of theforgingcosmic・Cults (cults3d.com)</a> <a target="_blank" href="https://www.etsy.com/shop/theForgingCosmic?ref=shop-header-name&amp;listing_id=1609427616&amp;from_page=listing" rel="nofollow noopener">theForgingCosmic - Etsy</a>&nbsp;I appreciate every download! &lt;3Give me feedback, I will update as much as need be.&nbsp;Please talk to me if you would like to sell prints.

Helldivers 2 G6 Frag Grenade Prop

cosplay

Sakul

Quick Towel Hanger Towel hanger for quick and easy hanging up towels with one hand. <img src="https://makerworld.bblmw.com/makerworld/draft/722020/2024-03-17_8c42434407ef4.jpg"> The hanger has a TPU cover that makes it easy to attach and remove towels without the hassle of searching for the towel catch. <img src="https://makerworld.bblmw.com/makerworld/draft/722020/2024-03-17_6f57de7e38074.jpg"> The hangers can be attached either with double-sided adhesive tape or with a screw.

Quick Towel Hangers

useful?

Regis

Arcane Jinx&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA Sunlu Black Transmission Distance: 6 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA Sunlu White Transmission Distance: 6&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Marine Blue or Lilla At layer #13 (1.12mm) swap to Gray At layer #15 (1.28mm) swap to White for the rest.

Arcane Jinx - Portrait

2d art

fireboy02

Perfect DND Dice tower for all types of board games. Supports the D20 dice as well as many other dice!&nbsp;No supports needed 2 wall lines15% supportive cubic infill

Castle Dice Tower

AskNinjaTom

PRINTED WITH BAMBU LAB TOUGH PLA, PLA WORKS FINE BUT PETG HAS NOT BEEN TESTED&nbsp;ADDED .2MM THICKNESS WRAP AROUND DESIGN LIDS FOR THOSE OF YOU THAT LIKE COLOR CHANGES - Only added as an .STLs not in the .3mf file<img src="https://makerworld.bblmw.com/makerworld/draft/580695/2024-02-22_696fe2a2b11d6.png">&nbsp;This Print in Place Push Button Locking Pill Box is a convenient and secure solution designed to safeguard your medication from accidental openings.<img src="https://makerworld.bblmw.com/makerworld/draft/580695/2024-02-20_030d1c2672b0e.png">For added versatility, the pill box can be combined with a separate storage box for insulin pens offering a comprehensive solution for managing multiple types of medication. Alternatively, each component can be used independently providing flexibility to cater to individual needs. Using the dowels and some super glue you can combine any of the boxes together.&nbsp;The dowel notches in the design offers a convenient and efficient method for combining the pieces of the pill and storage boxes. This feature simplifies the assembly process, allowing you to effortlessly merge two pill boxes or one storage box with a pill box according to your preferences. Again super glue is recommended to make the connection permanent.<img src="https://makerworld.bblmw.com/makerworld/draft/580695/2024-02-20_c071f598b09fa.png">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/580695/2024-02-20_09daedc0eb17b.png">&nbsp;

PUSH BUTTON LOCKING PILL BOX and STORAGE

healthcare/lab

3DPmom

<img class="image_resized" style="width: 30.8%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/ef01914b-e52f-46bd-9810-329db5a250f1">Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or wherever you need some fidgeting fun.&nbsp;Dimensions of Large Carrot: collapsed 2 ½ in. x 1 ⅝ in.; expanded 5 ½ in x 1 ⅝ in.Dimensions of Small Carrot: collapsed 2 ¼ in. x 1 ⅜ in.; expanded 4 ½ in. x 1 ⅜ in.Dimensions of Bed of dirt: 7 in. x 2 ⅛ in. x 1 in.Dimensions of Planter box: 7 ¼ in. x 2 ½ in. x 1 ¼ in.&nbsp;<img class="image_resized" style="width: 30.51%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/0095922b-c6d0-47d9-88bb-e7148aaa0185">Layer Height 0.2mmPLA works great15% InfillNo supports needed&nbsp;Note: I recommend printing the carrots on a smooth print plate (you can use a glue stick/hair spray or add an outer brim to the carrots if necessary to help with first layer adhesion.)&nbsp;Here is how I arranged my print profile (notice that on plate #5 I arranged all 4 carrots to print together to cut down on purge waste):Plate #1: Large Carrot (2 colors)Plate #2: Small Carrot (2 colors)Plate #3: Bed of dirt (1 color)Plate #4: Planter box (1 color)Plate #5: 2 Large Carrots, 2 Small Carrots (2 colors)&nbsp;“Assembly” is simple, when all the pieces are printed, simply place the bed of dirt in the planter box and add the carrots.&nbsp;<img class="image_resized" style="width: 30.37%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/30a5c647-0d22-4eb6-9e73-82994f4e6b02" width="358" height="60">6/29/24 I added a new Print Profile for a 2 Carrot Planter Box:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/9e3b143b-5c81-450d-a2eb-a958d963461d">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.17%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/14371598-53d9-4ddd-9638-93d796fc08b5">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing!

Carrot Garden 

random

TwinShepherdPrinting

I couldn't find a tool organizer for my print station that met my exact needs so I said “to hell with it” and made my own. includes inserts for IPA bottles, hand tools, scrapers, glue sticks and a “Catch All” tray at the bottom for random odds and ends.&nbsp;Including the Step file for those interested in changing the model to fit their own needs, I would love to see what some of Y'all come up with!&nbsp;Added a variant with horizontal caliper storage to the Raw files section for those interested.&nbsp;For those with a small form factor printer like the A1 mini o.Ojack did a great job making a smaller variant that fits on the mini build plate!<a target="_blank" href="https://makerworld.com/en/models/147182#profileId-160578" rel="nofollow noopener">https://makerworld.com/en/models/147182#profileId-160578</a>&nbsp;Some users have reported issues finding the caliper model files so I have created a separate post for that model. the files can still be found on under this models Raw Files drop down menu however for convenience and handy app ease of use the caliper model can be found here: <a target="_blank" href="https://makerworld.com/en/models/154289#profileId-168688" rel="nofollow noopener">https://makerworld.com/en/models/154289#profileId-168688</a>