user_3611540490

Dr.  J. Ma

Remake BetaFPV Pavo 20 whoop duct 3d printed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/140989/2023-10-31_0a118a627612d.gif"></figure>&nbsp;Why 3d print the ductThe original whoop duct cost $4 but your printed one is even cheaper ;-) also with different colors and to try different materials!&nbsp;Pavo20 has a molded frame with PA12 material. It is quite heavy. Here is a free version of it. It is not reverse engineering the original frame but fleshly design. &nbsp;The original whoop weighed 13.8g. &nbsp;There are 2 versions<ul><li>Lite: single wall, weighed 9.6 grams, 4 grams lighter than original molded frame. </li><li>Strong: 2 walls, weighed the same as original whoop but stronger. </li></ul>&nbsp;Original frame dimension from BetaFPV website. <figure class="image image_resized" style="width:65.92%;"><img src="https://cdn.shopifycdn.net/s/files/1/1778/6615/files/1_b9a7b382-a2e6-4c5e-959b-eaa1df63e036_1024x1024.jpg?v=1695626159"></figure>&nbsp;Suggested materials:<ul><li>PETG-CF</li><li>PLA-CF</li><li>PC</li></ul>PETG has a very similar mechanical properties to the orginal PA12 but when it with CF, it loads much better. You can also try with PLA for prototypes. &nbsp;You will need 4 m2 screw inserts with diameter 3 or 3.2 mm. Use heat insert by soldering iron or screw driver heated by a lighter. Press from top until it is the same level as the plastic part. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/140989/2023-10-30_656118fd198e1.png"></figure>&nbsp;&nbsp;

BetaFPV Pavo 20 3D Printed Whoop Duct (strong & lite)

无人机

josh.davis

2x2x6 (standard height) Gridfinity bin for holding Bambu P1S spare parts. Not stackable and overall height when full is approximately 66mm tall which should fit most workbench drawers.Spots for:<ul><li>2 wipers</li><li>3 filament cutting blades</li><li>6 slots for grease</li><li>2 nozzles</li><li>1 heater nozzle bracket</li><li>1 bin for loose screws and other parts. Also fits the cardstock sleeves the scraper blades fit into fairly snugly.</li></ul>

Gridfinity P1S Spare Parts Bin

Gridfinity

jonathan1987

Hello everyone, today I present my reinterpretation of kinetic sculpture. It&#39;s all completely printable and easy to assemble. This is the manual version, the motorized one will also come with a DC motor. As usual all tolerances are calculated. For a better finish of the threads, decrease the height of the layer.&nbsp;The instruction:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/851760/2024-04-13_0894b649229ee.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/851760/2024-04-13_527c3539dbddf.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/851760/2024-04-13_959cda47bd669.png"></figure>&nbsp;Happy printing!

Kinetic Gear - Manual Version

摆件模型

DKprints

Toyota 4Runner Kit Card! Prints flat and press fits together after removal from the frame. Can either fasten together with an adhesive, or leave as a press fit model. Depending on the tolerances and calibration of your prints, the model may need to be trimmed or deburred slightly to fit, or glued to stay in place. Can cut the parts out with flush cutters or a hobby knife and assemble by referencing the pictures for the placement and orientation of the parts.

Toyota 4Runner Kit Card

card模型

chemistinlab

OverviewThis PTFE adapter has threads for PC4-M6 (in) and PC4-M10 (out) push fittings. You can use this to feed 4 external spools or 1 AMS and 3 external spools.&nbsp;Materials and PrintingMaterials such as PLA or PETG are suitable.<ul><li>2-3 walls</li><li>5-10% infill</li><li>No support</li></ul>AssemblyMaterials<ul><li>4 way splitter</li><li>4 PC4-M6 fittings (<a target="_blank" href="https://www.amazon.com/Pneumatic-Fitting-Connect-Straight-Extruder/dp/B07Q9Q9JDP/ref=sr_1_8?crid=T0TBDR7UVFSD&amp;dib=eyJ2IjoiMSJ9.K7-f0svlQbEd9ZRtOB4rOueBsbiFzFXA_a2W4Rnx7Khgww4YWGI6n3nkuekXacA0Sv9NB-ww2HpzFuO1PdmtedSCmq9hYmD68LcBIVCamsFvbQypDHHLt_il5Sp_3fKXdSbQRU23iswWapbJilF2WO1WMRDnEZ-JbwMYgKbfcarrjso3-juxyamqbfcAjqq5YrLLiGz5HPR7_wP7aUNMyOb-M-vN0CKm4XUNB5tImW8.6vm46CPP3-Iuh3vylPAbHknpiLODRch3nDaw5Y2f2vg&amp;dib_tag=se&amp;keywords=ptfe%2Btube%2Bpush%2Bin%2Bquick%2Bfitting&amp;qid=1711431247&amp;sprefix=%2Caps%2C591&amp;sr=8-8&amp;th=1" rel="nofollow noopener">Amazon</a>)</li><li>1 PC4-M10 fitting (<a target="_blank" href="https://www.amazon.com/Pneumatic-Fitting-Connect-Straight-Extruder/dp/B07Q9Q9JDP/ref=sr_1_8?crid=T0TBDR7UVFSD&amp;dib=eyJ2IjoiMSJ9.K7-f0svlQbEd9ZRtOB4rOueBsbiFzFXA_a2W4Rnx7Khgww4YWGI6n3nkuekXacA0Sv9NB-ww2HpzFuO1PdmtedSCmq9hYmD68LcBIVCamsFvbQypDHHLt_il5Sp_3fKXdSbQRU23iswWapbJilF2WO1WMRDnEZ-JbwMYgKbfcarrjso3-juxyamqbfcAjqq5YrLLiGz5HPR7_wP7aUNMyOb-M-vN0CKm4XUNB5tImW8.6vm46CPP3-Iuh3vylPAbHknpiLODRch3nDaw5Y2f2vg&amp;dib_tag=se&amp;keywords=ptfe%2Btube%2Bpush%2Bin%2Bquick%2Bfitting&amp;qid=1711431247&amp;sprefix=%2Caps%2C591&amp;sr=8-8&amp;th=1" rel="nofollow noopener">Amazon</a>)</li></ul>Instructions<ul><li>Thread in fittings as shown in the image below.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/767817/2024-03-25_ab48804a1affa.png">&nbsp;Check out other models<figure class="table" style="float:left;width:64.19%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/139372" rel="nofollow noopener">Stackable Organizing Box</a>Print-in-place organizer</td><td><a target="_blank" href="https://makerworld.com/en/models/173048" rel="nofollow noopener">Pill Shape Organizer</a>Print-in-place pill organizer</td></tr><tr><td><figure class="image image_resized" style="width:100%;"><a href="https://makerworld.com/en/models/139372" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/767817/2024-01-18_72df22399101e.jpg"></a></figure></td><td><figure class="image image_resized" style="width:90.68%;"><a href="https://makerworld.com/en/models/173048" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/767817/2024-02-05_18709291beed2.png"></a></figure></td></tr><tr><td><a target="_blank" href="https://makerworld.com/en/models/151560" rel="nofollow noopener">Lover Rover Kit</a>Valentines Mars rover</td><td><a target="_blank" href="https://makerworld.com/en/models/173556" rel="nofollow noopener">Pocket Sized Pill Case</a>3 day pill organizer</td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/151560" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/767817/2024-01-27_5faf2abe4ea02.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/173556" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/767817/2024-02-05_099a37b7e6dd1.png"></a></figure></td></tr></tbody></table></figure>&nbsp;

4 Way PTFE Splitter Adapter (PC4-M6 and PC4-M10)

浪子光

所有零件都可以使用A1 mini打印无需支撑 填充20% 墙4所有的边均采用模块化设计，默认提供了预留完整螺丝孔位的模型，也可以自己下载原始文件找需要的模型原始文件内包含solidworks2022源文件以及step文件固定亚克力的合页与关门扭，不需要像我一样用这么多，一块亚克力板使用3~4个合页就可以（ps.我是因为打印前没规划好，导致打多了很多，又不想浪费就全用上了）为了框架的稳固，打印件总共需要接近5kg的材料，请自行斟酌是否需要打印

A1/A1 mini封箱，模块化封箱_A1 mini可打印

其他工具

humebeam

Support&nbsp;All my designs and mods are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)<ul><li><a target="_blank" href="https://www.paypal.me/humebeamengineering" rel="nofollow noopener">https://www.paypal.me/humebeamengineering</a></li></ul>About&nbsp;This is a quick and useful test for 3D printers, it's less than 9 g in total and can be printed quite fast. There are other similar tests available and I've tried a few but they are often quite big and wasteful and take a long time to print while testing things you don't really need to test in order to dial in your printer. &nbsp;For this test the overhangs test is split into two columns to give each part some time to naturally cool so you can print it a little faster.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_adgd1yqenxh7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_lnds8mxdq0e2.jpg"></figure>The 3D Printer Mini Test has the following features/tests:<ul><li>Flow Calibration Cube </li><li>Overhangs test: 40° to 75° in 5° increments</li><li>Bridging test: 10, 20 and 30 mm</li><li>Diameter test: 10 mm</li><li>Hole test: 8 mm</li><li>Fine text test</li></ul>While most of the tests above are easy to just measure with calipers or by inspecting the print, the flow calibration cube requires measuring with calipers and also some basic math, there's a guide just below. The flow calibration cube part of the test is also available as a super quick standalone test <a target="_blank" href="https://www.printables.com/model/81314-flow-calibration-cube" rel="nofollow noopener">here</a> but I included it in this test as well.&nbsp;Print settings:&nbsp;I recommend printing the test with a 0.40 mm nozzle and a 0.40 mm line width, 0.20 mm layer height and 3 perimeters, 3 top layers and 3 bottom layers. Overhangs are usually printed best inside out.&nbsp;Guide: Flow Calibration Cube, 0.40 mm nozzle&nbsp;For example, using a 0.40 mm nozzle, set the line width to exactly 0.40 mm in your slicer and print this calibration cube which has 0.80 mm walls. After you have printed it, measure the thickness of all four walls with a caliper and take a note of the widths. &nbsp;For example, let's say these are the widths of the walls measured:0.81, 0.82, 0.83, 0.83&nbsp;Then the formula to calculate the flow rate is:0.80 / ((0.81 + 0.82 + 0.83 + 0.83) / 4) ≈ 0.97&nbsp;So, the flowrate or extrusion multiplier is about 97% or 0.97 which you then set in your slicer. Print the cube again to confirm. The measured walls should now be very close to 0.80 mm thick.&nbsp;What about other nozzle size?&nbsp;The formula is the same for the other nozzle sizes. Set the line width to be exactly the same as your nozzle size then print that specific flow calibration cube. Then measure all walls with a caliper. &nbsp;Here's the formula to calculate the flow rate:&nbsp;(Nozzle size* 2) / ((Wall 1 width + Wall 2 width + Wall 3 width + Wall 4 width) / 4)&nbsp;Notes: &nbsp;The method is not completely accurate as each slicer deals with wall widths and flow a little differently. It's a good tool to get a quick indication though.

无人机

Gridfinity

摆件模型

card模型

p1s

其他工具

测试