user_3584994291

FlorinV

Great desk accessory, to look at, to play with(easy to spin) and to use.&nbsp;Update 27.01.2024: Increase the filament infill and walls of the arm (to better hold it&#39;s shape in time, as the magnetic force tries to deform it). Changed one of the screws to be a shorter version, in case your magnets are too strong and need a shorter one to fit.Update 31.01.2024: Added another pen model (Hexagonal style). There is a new profile for this one. Enjoy !&nbsp;Features:<ul><li>Parts needed: 3 magnets with size 10x2mm. Probably you can use smaller magnets also, but you would have to add maybe one more magnet to the support arm. You need to play with it. Also 8x2mm magnets should be fine, but this is not tested by me (someone else tried).</li><li>No AMS needed to print it multicolor.</li><li>Two different pen designs to choose from. You can use them without support and magnets, if you want.</li><li>The pen design included in the main profile, is the stronger one, clean and with a special cutout that can be used to check the level of ink in your reserve.</li><li>The optional pen design is using a thin insert to make the pen multicolored without using AMS or wasting a lot of filament and time.</li><li>Optional tag caps to attach to the support arm. You can add one character to each cap and form a gamer tag, a name, an abbreviation etc. Or add some color pattern, whatever you like.</li><li>Designed for Pilot reserves ( 0.7mm), but can work with any pen reserve as long as you cut it at 122mm length. Just search with google something similar with: Pilot FriXion Pen Refills, 0.7 mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/388de27a-0257-4f7d-870e-8d9665c7c1de.jpg"></figure><ul><li>If you use Pilot reserve, you have to use the little spacer as displayed in assembly pictures or video.</li><li>If you choose to use another type of pen reserve, just cut it at 122 mm length and don&#39;t use the spacer anymore. Tested with simple pen reserve like the one bellow, and it works also. Just cut it to 122mm length and don&#39;t add the little spacer provided for Pilot reserves.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_8d03559413d1e.png"></figure>Assembly guide:<ul><li>Please check the video at the end with full setup and please use subtitles, as I&#39;ve added some useful information while assembling it.</li></ul>Pen:<ul><li>Please remove carefully the brim from the body of the pen after printing it. Usually if the bed sticks good, when you pull the body pen, the brim with separate easily. I&#39;ve setup a small gap between pen and brim, to be sure it sticks well, as it&#39;s a tall and narrow part.</li><li>Attention! Before gluing the magnet cap to the pen, be sure the magnet is facing the right direction to be attracted by the magnets on the support.  Carefully glue the magnet cap, to not get glue everywhere.</li><li>Please check bellow all the parts of the pen and how they are connected.</li></ul><figure class="image image_resized" style="width: 71.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_6cf57802c8d71.jpg"></figure>Support:<ul><li>Carefully remove the supports from the base part.</li><li>Insert the arm into the base and screw in the provided screw. There are 2 versions of the screw in the profile, one longer and one shorter. Depending on your magnets power, use the one that works better for you.</li><li>Be sure you screw it in enough so that the base can lay flat on the table. Change the screw with the shorter version if you need to.</li><li>Add two magnets (10x2mm) on the top hole of the arm. Before gluing them, be sure they are aligned with the magnet from the pen, so that they attract each other!</li><li>After everything is setup, you can use the bottom screw to fine tune the distance between pen magnet and support arm magnets, so that it holds the pen good, but don&#39;t pull up the pen from the base.</li></ul><figure class="image image_resized" style="width: 78.12%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_ff9970461619c.jpg"></figure><figure class="media"></figure>&nbsp;Step by step on how to customize the letter caps:<ul><li>you open the &#34;8 blank caps to customize&#34; into Bambu studio, </li><li>select one of the caps objects, </li><li>click on the TEXT icon -add one letter into the &#34;Input Text&#34; field </li><li>move your mouse cursor over the cap and click when you center it </li><li>you can move it around again by selecting the &#34;text_shape&#34; object later under the &#34;button.stl&#34; object </li><li>Repeat for each letter you want. (you have 8 caps into the profile, but you can clone them to have more if you want)  </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-03-18_a5b871a5e0d65.png"></figure>

Magnetic Levitating Holder & 3 pen models

工具

Murphyte

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459305/design/2024-05-10_98327885ee295.gif"></figure>更新：修改了平台5的两个构件“凛支撑2”（请看第五盘的两个柱子“凛支撑”、“凛支撑2”是否一样，如果一样请重新下载文件，如果打印出来了也可以保留柱子，下一个亭子也会有一样的结构，如果对你造成了困扰，对此我表示很抱歉）打印建议：1.屋面使用0.16的层高，在调整缩放的时候需要在x处多加2%2.不建议打印太小，理想比例是70%，可发大到90%3.所有构件都可以使用0.4的喷嘴打出，如果你追求高质量可以使用0.2的喷嘴打印某个构件，如屋面4.stl是100%的文件请自行选择合适的大小缩放5.由于某些原因，如果遇到孔洞太小的问题请调整xy补偿6.导入stl时提示“是否要转换成毫米要点是”详细解释请看此视频Detailed：<figure class="media"><oembed url="https://www.bilibili.com/video/BV1kH4y1G7fj/?share_source=copy_web&amp;vd_source=cb4693ae1b7ed829bc12841b8c217e9f"></oembed></figure>update：Modified two members of Platform 5 &#34;凛支撑2&#34;（Please see if the two pillars of the fifth disc &#34;凛支撑&#34; and &#34;凛支撑 2&#34; are the same, if they are the same, please re-download the file, if you print it out, you can keep the columns, and the next pavilion will also have the same structure, if it bothers you, I apologize for this）Printing Suggestions:1. Use a floor height of 0.16 for the roof, and you need to add 2% more at x when adjusting the scale2. It is not recommended to print too small, the ideal ratio is 70%, and the size can be as large as 90%3. All components can be printed with 0.4 nozzles, if you pursue high quality, you can use 0.2 nozzles to print a certain component, such as roofing4. STL is 100% file, please choose the appropriate size to zoom5. Due to some reasons, if you encounter the problem that the hole is too small, please adjust the XY compensation6. When importing STL, it prompts &#34;Do you want to convert to millimeters&#34;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459305/design/2024-05-10_190b7a3fddde8.gif"></figure>安装动画：Install animations：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459305/design/2024-05-10_259cedf4dbfbe.gif"></figure>

工具

手办